change systems Germany

Poppe + Potthoff Maschinenbau GmbH develops and manufactures systems for operational and endurance testing of components in the automotive and shipbuilding industries, as well as other sectors. The precise and powerful special machines from the specialist in high-pressure and testing technology are used in research, development, and production. This includes systems for burst pressure and leak tes...

... reliability offered by our radio controls. All of our controls give you ergonomic design, convenient operation and many opportunities to tailor the solution to meet the needs of your application. Demag D3 radio control:Rapid change between transmitters, Speed limit function DRC-DC radio control system:and-held transmitters to control up to three motion axes DRC-MP radio control system:Precise...

...• Complete oil recovery at the source • Clean fluid system • High biostability in aqueous coolants • Long filter service life o High absorption capacities due to depth filters o 120-150 m² filter surface area per gram o Excellent dirt-to-euro-per-kilogram ratio o Filter change without production interruption • Filter material made from 100% natural fibers – 0% metals, 0% plastics o Complies with the requirements of the Circular Economy Act o Waste code 150202 • Modular design • Low energy consumption • Easy installation and operation...

... for operation with just one installed table module. Advantages of the shuttle table system: * Loading and unloading during the cutting process - better system utilization * Improved accessibility to produced items through movable material carriers * Increased cost-effectiveness by minimizing downtime * Easy operation * Automatic table change after laser cutting is possible * System is not encapsulated - robot loading is possible (24/7 operation)...

... tasks. Among other things, certified motion modules according to PLCopen and the full scope of the IEC 61131-3 programming interface are available, as well as integrated motion planning with coordinate values for robot positions in different coordinate systems and numerous supported kinematics with convenient configuration, e.g. various gantry robots (2/3/5 axes), bipod/tripod robots, Scara robots...

...depending on the model and equipment, top performances of over 120 cycles/min are possible. With continuously heated sealing systems, all commercially available films from polyethylene to polyolefin and PVC can be processed on this film packaging machine. In combination with polyolefin film and the BVM separating knife, the finest sealing seams can be produced. The simplest adjustments of the Genius...

... to 600 liters. As expected from FRICKE, the modular dosing units can also be flexibly expanded in the Duplex system. ■ 30 or 60 kg scale ■ 600 or 1,500 kg scale ■ smallest single dosing 0.5 g ■ batch weight from 50 to 600 liters ■ fully automatic mixing container intake ■ flexible storage configuration of raw materials ■ quick container change ■ unattended plant operation ■ optional: stirring station and powder dosing ■ explosion protection according to ATEX...

... guaranteed. The fine pore structure of the insulation and the phase change material provide double protection. Number of measurement channels: 4 or 6 Measurement temperature range: -150 to 500 °C Thermocouple type: K (mini connector) Logger accuracy: ±0.5 °C System accuracy: ±1.6 °C Thermocouple accuracy: ±0.4% or 1.1 °C according to ANSI MC96.1 Cold junction compensation: Yes – Accuracy is...

... equipment not delivered by Lödige. As your needs change over time, Lödige can also support the expansion of your facility, or the transition to new technologies. Lödige have a strong track record for delivering system enhancements or modernisations whilst Clients continue to run their day to day business. MAINTENANCE The modular configuration of our maintenance agreements provides you with long-term reliability at the lowest cost. CONSULTING We provide expert advice on the current condition of your systems and potential for improvement with regard to technology, throughput and operation. ...

... solutions through a uniform riveting modular system • No change of rivet supplier necessary • Cost-effective production through standardized and/or optimized C-brackets Technology: Riveting Drive: Servo-Motorized Execution: Stationary, robot-guided Industries: Automotive, Steel Construction, Metal Construction, Lighting, Computers, HVAC, Climate Technology...

... line systems made from different materials, such as rubber-metal connections, can be treated both internally and externally. The flexible system technology with many adjustment options ensures effective cleaning and testing of a wide range of components. - Internal and external cleaning - Flushing with directional change - Pulsing - Blowing out - Flow testing - Pressure testing - Vacuum drying - Heating up - Applying corrosion protection...

...The drum lift systems are designed for the quick and hassle-free exchange of containers for pasty media (e.g., fats, oils, adhesives). The cumbersome manual lifting of the scraper lid is eliminated. The Tekawe lift systems facilitate the rapid and effortless change of containers for pasty media (e.g., fats, oils, adhesives). The otherwise cumbersome manual lifting of the scraper lid and the...

...quick, tool-free belt change - ideal for easy cleaning/maintenance With this quick-release mechanism, it is possible to change the belt in 20 seconds. This is of immense importance for the cleaning cycle.

... - Linear systems (pneumatic, electric, mechanical) - Curve-controlled drives, linear and handling systems Workpiece carrier circulation systems: Horizontal, vertical Integration of SIM workpiece carrier quick insertion: Yes Integration of workpiece carrier change systems: Yes Indexing systems: Drive electromechanical / pneumatic systems / curve gear Long-stroke systems: Drive electromechanical...

... automatic powder coating booths are specifically selected according to the sizes of the products to be coated. They are manufactured according to customer requirements with jet-pulse filters, mono-cyclones, or multi-cyclones. It features an automatic floor cleaning function with compressed air, and a very simple color change is possible. Additive Dust Collection Systems - Jet-Pulse Filter System - Mono-Cyclone - Multi-Cyclones Advantages - Easy to use - Quick color change - Minimal color loss - Simple assembly and disassembly...

... – depending on the requirements for crystallization and cooling of the respective polymer. ○ Spinning beam with heating and temperature holding function (bimetallic material). ○ Easily replaceable spinning nozzle. ○ Supports various types of spinning nozzle openings. ○ Systems for producing BCF fibers with longitudinally split texturing device and electric position and angle control. (optional) ○ Double draw rolls (depending on requirements) for uniform fiber heating; more precise shaping increases fiber quality. POY-4000: 2200*1950*3250 FDY-2500: 2100*1950*3250 BCF-2500: 2100*1950*3250...

... oils for petrol and diesel engines. It is also suitable for catalytic converters and turbochargers. After adding it to the motor oil, the engine only has to be warmed up. Re-fill after each oil change. The benefits at a glance ERC hydraulic tappet additive: Attenuates noise created by dirty and gummed-up hydraulic tappets Cleans valve bores Improves the lubricating properties of the oil ERC hydraulic tappet additive can be added to the motor oil at any time. One bottle is sufficient for 4 litres of motor oil.

...Change Silo Two-Bag System for Bulk Goods - WST 20 - WST 22 Bag silos are used worldwide, primarily in the construction materials industry. The silos are utilized for the transport and storage of gypsum, cement, masonry mortar, etc. The containers are delivered partially filled to construction sites, and their contents are extracted or processed directly using conveyor systems, screws, and...

...Operation is done via a joystick, and the operator can change the direction of the caterpillar tracks at any time. If there isn't enough height available, it's no longer a problem; with the new Skipper stair trolley, there's always a solution. Load capacity 400 Kg Shown in the image with the optional accessory for doors and windows.

...The SF filtration system operates continuously and at a constant pressure and process. The sieve change procedure has no impact on product quality. Short, unframed flow channels also ensure very short exposure times for the molten material. Type: continuous Technology: circular disc Drive: unspecified Options: unspecified...

...and barcodes. Prints can be produced with a density of up to 600dpi. Easy color change with water-based inks. The print head holder is also well-suited for demanding installations. An external photo cell is not necessary as the print head is equipped with one. However, encoders and, if necessary, a photo cell can also be connected. 24 months warranty.

... abrasive recovery, a drain cup for the quickest abrasive change, interior lighting of the blasting chamber, front brush slots approximately 600 mm long for optimal processing of glass objects, three brush slots on the sides and top for easy passage of the parts to be blasted, closure sliders on the sides for dust-tight sealing of the cabin during the blasting process, a standard blasting head and...

...The Apullma SuperClean conveyors can be equipped with all common plastic modular belts. The stainless steel modular SuperClean conveyors can be fitted with plastic modular belts from all leading manufacturers. The skeletal construction and round tube technology have no hidden dirt corners or dead spaces. Thanks to the optional new SuperQuick quick-change mechanism, the modular belt can also be...

...Precision, effectiveness, reliability - these are the hallmarks of our work. To continue meeting these standards in the future, we utilize modern computer-controlled metal processing systems. In the area of CNC turning (slant bed) with 3 machines, we have a maximum bar diameter of 52mm and a turning length of 400mm. Up to 12 tools per machine. In the area of CNC turning (flat bed) with 3 machines, we have a bar diameter of 42mm and a turning length of 800mm. We can choose between pneumatic chucks or manual chucks with an 8-fold turret or quick-change holders.

... is required. Since compressed air is consumed only during effective lifting activity, this energy supply is extremely cost-efficient. As a system solution: - BalanceLift lifting cylinder: The BalanceLift lifting cylinder is available in "Mini", "Compact", and "Fullscale" versions, offering customized handling solutions for goods up to 150 kg and lifting heights of up to 4m. The suspension can be horizontal or vertical. - Flexible mounting options: In combination with BalanceRail traverse systems, with column or wall-mounted swing cranes, BalanceStand...

...EPDM foam rubber material for coating and paint application rollers as well as pressure rollers in roll change systems. Product features: Uniform surface structure, seamless, compressible, hardness: 5 Sh A.

...In light of climate change and the continuously rising energy prices, heat pumps are increasingly coming into focus as environmentally friendly and highly efficient heating systems.

... pendulum deflection is detected depending on the application area and angle size either with contactless, inductive, optoelectronic, or magnetoresistive angle measurement transducers. For safety-critical measurement tasks, we recommend the use of pendulum-free redundant micro-electromechanical inclination systems (MEMS). The output signal of the inclination values is available either in analog form as a...

... tasks, leading to higher productivity and time savings. Integration Capabilities: Custom software can be seamlessly integrated into existing systems, creating a cohesive technology environment and improving overall operational efficiency.

...The clay bucket is particularly suitable for trench and cable construction. Operating weight 1 to 8 tons Features • Main cutting edge and parts of the side cutting edge made of high-strength wear-resistant steel • Robust construction • Optional with bolted tooth system • Compatible with various quick-change systems • Notched side parts Application area The clay bucket is especially suitable for trench and cable construction. The notched side parts ensure that no excavated material gets stuck in the bucket when working in clay-rich soils.