cast-steel Germany

...It can't be challenging enough for us, because our employees love a challenge! Especially when it comes to geometrically complex, core-intensive, or double-walled cast parts. This is where our expertise lies, both in the production of small series and in the reliable manufacturing of single castings and prototypes.

...Material: Gray cast iron GJL 200. Threaded pin stainless steel 1.4305 (equivalent to AISI 303). Cross pin stainless steel 1.4310 (equivalent to AISI 301). Execution: ground, polished. Threaded pin and cross pin polished. On request: Star knobs made of gray cast iron, plastic-coated. Form A: Blank Form B: Through hole Form C: Blind hole Form D: Thread reamed Form E: Threaded blind hole Form L: With external thread...

...Belven is a manufacturer of swivel valves based in Belgium, operating for over 40 years. As a leading distributor, Ahrendt Industrial Valves also carries out the automation of the valves with pneumatic or electric swivel drives in its own workshop. In addition to the Belven shut-off valves BV10 and BV12, high-quality Belven ball valves type BV4 made of steel and stainless steel are also available, featuring extensive certifications such as ATEX, Nace, TA-Luft, ADR, and SIL or fire safe.

...A flexible and cost-effective way of connecting tubes to each other reliably and stably. RK Rose+Krieger developed the precision-cast stainless steel tube connectors specially for heavy loads and impact-resistance. The high-strength tube connectors are resistant to high temperatures and corrosion, and are engineered for dynamic loads. An electrochemical passivation – the tube connectors are...

...In our in-house paint stripping facility (chemical spray stripping), we can strip paint from steel and cast iron without mechanically stressing the workpieces. Painting frames, miscoatings, or old coatings can be professionally and thoroughly stripped by us. After the stripping process, the workpieces are treated with a rust protection to prevent any potential rust formation. Our stripping system is capable of chemically stripping components with dimensions of 1200 mm x 800 mm x 1800 mm and a weight of up to 1000 kg.

...Using state-of-the-art machines, we produce high-quality molded parts in the field of PU casting technology. By varying the raw materials, formulations, and manufacturing processes, we can specifically influence the properties. Therefore, we can manufacture complex geometries and larger components with the excellent properties of polyurethane. In casting technology, simple molds can be used to cost-effectively produce both small and large quantities. A solid connection with other materials (steel, aluminum, cast iron, etc.) is also possible.

...The waffle maker with 2 cooking units in the shape of Brussels waffles stands out not only for the high heat conductivity of the cast iron plates but also for its robust structure and power. The two separate on/off switches also allow for easy and tailored use. Material: Stainless steel Plate material: Cast iron, enameled Separately adjustable cooking units: 2 Plate model(s): Fixed Waffle shape: Brussels waffle Temperature range from: 50 °C Temperature range up to: 300 °C...

...Coupling spanners Material::Malleable cast iron or steel...

...We provide you with sprockets of the highest quality. We provide you with the suitable cast steel sprockets that meet the customer’s requirements. Modern 3D CAD systems and the finite element method were used to develop the sprockets in our range. Areas on the sprockets that are exposed to increased loads in use have been reinforced accordingly. The result is sprockets that stand out due to their...

...All information at a glance: "Lubricant and Plant Oil Pump Viscomat 70 230 V (self-priming)" Flow rate 25 l/min Max pressure 6 bar Vane pump, providing high flow volume at high pressures Pump body made of die-cast aluminum Rotor made of sintered steel with resin vanes Seal for rotating shaft accessible from the pump side Integrated bypass line in the pump body Connection on both sides 1...

... harshest kiln environments, the MP150 linescanner, which is used in the CS210 thermal imaging system system, is designed with a rugged cast aluminum housing and mounted in a robust stainless-steel enclosure. Measured temperature range:100...650 °C (burning zone 700...1800 °C) Temperature resolution:0.1 K Accuracy:±0.5% of reading or ±3 °C Spot detection (50% of energy):450 : 1 (2.2 mradians...

... & CONEC SlimCon connector series from CONEC represents a consistent evolution of the design for industrial use, even under extremely harsh environmental conditions. The design of the connector in a single-piece housing made of zinc die-cast makes it an extremely robust mechanical interface with reliable protection against splashes and dust in aggressive environments. Housing material: Tinned brass, stainless steel Number of contacts standard: 9-, 15-, 25-, 37-, 50-pole. Number of contacts high density: 15-, 26-, 44-, 62-, 78-pole. Quality level: 1-3...

...You can also purchase fastening materials for flat connection options for the WfW perforated sheets: We offer the following variants for material thicknesses of 1.5 - 2.0 mm and 3.0 - 4.0 mm: - Zinc die-cast - Powder-coated zinc die-cast in the color of your perforated sheets/railing infills - Stainless steel All variants include two rubber inserts and two countersunk screws M6x16 each. Please select your variant.

...QUADRO 80 gets its name from the square steel tubes with a diameter of 80 mm that form the profile base of the system. Due to the special properties of the spheroidal cast parts, an above-average load capacity is achieved. The overall statics of the system is also very high due to the combination with steel profiles. QUADRO can be quickly and easily assembled directly at the place of use thanks...

...Curved shape, oil-hardened, round cast steel wire. Wire thickness 0.30 mm, coating height 25 mm...

...Cast parts gray cast iron spheroidal cast iron including mechanical processing...

...For the further processing of cast parts, we offer a wide range of processes to meet all customer requirements.

...Structure: Single-layer multi-layer bellows, both sides screwed cast iron galvanized with internal thread. Optional: Multi-layer bellows. Materials: Bellows made of 1.4541, optionally 1.4571. Screwed cast iron galvanized, optionally 1.4401. Pressure ratings: PN 10 (BD 10 bar, BT 20°C). Nominal diameter and lengths: Nominal diameter DN 15-DN 50, standard lengths according to table. Optional: Special lengths.

... with a high carbide content, and the TiAlN-based high-performance coating. Machining high-strength steels up to 63 HRC and chill cast iron up to 67 HRC poses no problems. In the case of a high-alloy steel, the processing time was almost halved compared to a competitor's tool. Cutting material: LCK10M Material: TiAlN-based high-performance coating Material: Carbide content...

... sufficient, there is a twin top part FB-HO2 and FB-HO2A for each variant. The installation part FB-HE has been developed for narrow precast concrete elements. For smaller load levels and simultaneously large concrete cores, MOSO® CE anchor rails are a cost-effective alternative to the installation part FB-HE. Load levels: 6.0 – 70.0 kN Material: approved stainless steel Verification: construction approval...

...* General construction steels S 235 to S 355 Fine-grain construction steels S 275 to S 460 Pressure vessel steels P 195 to P 460, 16 Mo 3 Pipe steels L 210 to L 450 Cast steels GE200, GE240, GP 240, G20Mo5 *Check the scope of suitability regarding special properties and approval scope. Certifications: TÜV, CE Current Type: = + Welding Position: PA, PB, PC, PE, PF Article Number: 1205751070 Weight...

...Since 1947, we have been engaged in the processing of various surfaces. We grind, polish, brush, and deburr all types of metal parts such as fittings, construction and furniture hardware, lighting components, cast parts, automotive parts, aerospace parts, components for the medical and food industries, etc., made from steel, stainless steel, brass, aluminum, titanium, die-cast, and other...

...Zinc die casting: Zinc die-cast parts up to 800g with a clamping force of up to 100 tons. Production of construction fittings, furniture fittings, household appliance manufacturing, as well as industrial articles made from zinc.

...This coarser blasting material is primarily used for massive steel constructions. Steel shot blasting: This coarser blasting material is mainly used for massive steel constructions, balcony railings, fencing systems, other cast and forged iron parts, as well as for cast iron radiators or decorative grilles.

...in round and hexagonal design Dimensions Metric ISO trapezoidal thread according to DIN 103 TR 10 x 2 – TR 60 x 9 Materials Automatic steel 11 S Mn 30 + C 11 S Mn Pb 30 + C Stainless steel A1 1.4305, A2 1.4301, A4 1.4401/4, A5 1.4571 Brass Ms 58, red cast iron Rg7 Special materials available upon request...

... Diameter: Material of Tread Wheel Width: 50-80 mm Load Capacity: 450-2,100 kg Housing Material: heavy steel welded construction, galvanized Material of Wheel Body: special gray cast iron with ball bearing Material of Tread: polyurethane, approx. 95° Shore A...

...Keil flat slide available in the following versions: – Metallic sealing – Soft sealing Housing materials • Grey cast iron • Ductile cast iron • Steel cast • Stainless steel • Special materials Nominal diameters • DN 40-300 Pressure ratings • PN10-PN16 • ANSI...

...Travel path X/Y/Z 730/730/880mm 2 pallets 500 x 500 mm We process all common types of cast iron and steel, non-ferrous metals, as well as high-strength materials. Our specialization lies in the machining of cast and stainless steel. About this product: With our modern CNC machine park, we solve highly complex machining tasks with the utmost precision.

...CE Compliance: Device safety according to EU Directive No. 89/392 EEC) The advantages at a glance Equipment and accessories Technical data Pliers housing: high-quality aluminum die-cast Pliers arms: steel, forged Narrow pliers head for hard-to-reach rivet points. Opening spring for automatic mandrel ejection Ergonomic handle grips Maintenance manual with spare parts list Assembly key...

...Device carriers made from square steel tubes and aluminum cast profiles. Custom designs thanks to a modular construction system. The square steel tubes used have edge lengths of 50 mm, 60 mm, or 80 mm. They are connected by aluminum cast profiles to form a modular arm system. The maximum load capacity at a 1.00 m arm length is: for GT 50/2: 100 kg for GT 60/2: 125 kg for GT 80/2: 150 kg...