beads Germany

...novaflon 100 is made of structured PTFE and is filled with micro hollow glass beads. The material is universally resistant to almost all chemicals across the entire pH range. Above 85 °C, novaflon 100 is particularly suited for use in acids. Due to the optimal incorporation of the filler, the material has low base porosity and achieves a very low leakage rate even at low surface pressure.

...Component Cleaning - Blasting with corundum - Blasting with glass beads - Carbon cleaning in salt bath - Immersion cleaning, possibly with ultrasonic support - Cleaning with citric acid - Pickling with phosphoric acid...

...Dispensing unit for precise low volume dosage The dosage module for the mzr-2505 (S/F), mzr-2905 (S/F) and mzr-4605 (S/F) pumps can be used for volumetric dosage of adhesives like UV cure adhesive, epoxy resin, screw fixing varnish, lubricants and silicon. The dosage module suits the dispensing of smallest amounts of liquids requiring highly precise handling (small beads or spots) and the...

...For cleaning and improving adhesion in bonding applications on glass, cut polyurethane adhesive beads, PUR pre-coated panes, and paints. Properties: Colorless to slightly yellowish. Temperature resistance: Evaporation time maximum 2 hours. Temperature above 15° C 10 minutes, temperature below 15° C 30 minutes. Processing temperature: + 5° C to + 35° C...

...The Eye Manufactory Power Wax consists of high-quality wax beads for thorough hair removal. The Power Wax is a hot wax that is excellent for use on eyebrows at the brow bar.

...Windmill wheel with love beads (sugar dragées) in various flavors. Made with natural flavors and colorings. Double the fun. Here, everything revolves around play and snacking pleasure. Whether in a gust of wind or with full puff power: This colorful windmill wheel from Heinerle brings movement to the game. And the delicious stick content made of crunchy love beads offers double the fun. By the...

...Ceramic beads are an abrasive medium based on zirconium oxide, produced through a melting process and subsequently shaped into round grains via an atomization process. Applications: • Reusable abrasive medium • Polishing • Shot peening • Fine and structured blasting Hardness approx. 7 – 7.5 Mohs Grain shape round Melting point approx. 2100 °C Specific weight approx. 3.8 g/cm³ Bulk weight approx. 2.1 – 2.4 g/cm³ (depending on grain size) ZrO2 61.98 % SiO2 27.77 % Al2O3 4.57 % CaO 3.47 % Fe2O3 0.14 % TiO2 0.34 % Main grain range (µm): 125-250 Item No.: 6.1216.06.0...

...Glass beads are a low-cost alternative for Raschig rings. They have less surface area than the rings, and therefore a reduced separation capacity, but they are perfectly adequate for many applications. Our glass spheres can also be supplied with a matt surface. Various types of glass are possible for our glass beads: Soda glass Borosilicate glass 3.3 Quartz glass On request, we can manufacture borosilicate or quartz glass beads with dimensions according to your specifications. Glass beads...

...Glass beads with a diameter of 150 – 250 µm.

...Point light sources showing the highest brightness density, homogeneity and flexibility The latest innovation of GATTAquant is a new type of fluorescent beads, ideal for determining the point spread function in optical microscopy. gattabeads are the perfect choice for STED microscopy and other fluorescence techniques requiring small but bright point sources of light.

... Kaventsmann (140x180 cm) > also suitable for outdoor use, as the cover can be removed and washed in case of dirt > finished with a very tear- and abrasion-resistant decorative textile > optional: with loop or eyelet for hanging Material Filling Our inner lining consists of a polyester fleece, and the filling is made of high-quality EPS beads (Made in Germany) with an average size of 5-6 mm. They are already packed into the inner lining by us. Approximately 220 liters are used for the bean bag Muggelig Lüttje Approximately 400 liters are used for the bean bag...

... technology. The wax removes hair as painlessly as possible. It is free from harmful chemicals and gentle on your skin. The wax removes hair from the root, providing long-lasting results and slower regrowth. ✅ SUSTAINABLE PACKAGING AND LOW MELTING POINT: NEOMANN wax beads come in eco-friendly paper packaging. This can be easily sealed with the zipper and is reusable.

...Using the new material fire amber, our rosary has been crafted in a workshop environment with exceptional craftsmanship and is bright as glass. The quality of our prayer beads is high; they are very beautiful and pleasant to handle, unlike ordinary cheap plastic, etc. You will never experience products that resemble pus, and our rosary will change color over time as you use it. * All our new...

...With the combination of laser cutting and punching technology, we can manufacture components for you. In addition to laser cutting, we also offer additional forming processes such as flanges, beads, cups, and recesses. Threads can also be integrated into the component through shaping.

...The blasting of aluminum, steel, and magnesium is used for cleaning and roughening the surfaces. For this purpose, stainless steel shot or glass beads are blasted onto the material using high-pressure air. For aluminum materials, we use a centrifugal blasting system with stainless steel shot. For steel parts, our manual pressure blasting booth and hand injector booth are utilized with stainless steel shot or glass beads. This creates an optimal foundation for the powder coating to adhere particularly well to the product.

...The Nabertherm Sintering Furnace LT 02/13 CR is ideally suited for sintering cobalt-chromium restorations in dental laboratories. The sintered material is placed in a special sintering bell and heat-treated under argon. The nearly oxygen-free atmosphere with low argon consumption, combined with sintering beads, ensures excellent sintering results. The system can be freely programmed for various...

...ARC I BX1 is a polyurethane-modified epoxy composite material, reinforced with ceramic beads and flakes for protection against severe sliding abrasion and impact wear. High ceramic particle content Applied with a trowel or plastic applicator Applied at a thickness of 6 mm (1/4") or more Available sizes: 20 kg, 12 x 20 kg...

...Upon request, we can blast your workpieces to achieve a more aesthetically pleasing surface. We use a variety of abrasives, such as glass beads or corundum. This allows us to either densify or matte the surfaces.

...High-tech blasting processes, functional or decorative, air or wheel-driven, and always perfect for your surface. We blast for you with stainless steel granulate, ceramic and glass beads.

...The JUNIOR 40 is a very handy device for various applications. It works according to the suction system, in which the blasting agent is sucked in the nozzle head by the compressed air (injector effect). The blown abrasive is filled into the sand container for re-use via the built-in insert vibrating screen and fed to the blasting nozzle. Depending on the desired surface, all dry blasting agents can be used, such as slag abrasives, glass beads, corundum, silicon, glass grain, chilled sand, etc. Material:steel Surface:powder coatings...

...Plug-in screens (start-up screens) Type S can be temporarily used as start-up protection in pipelines. They protect downstream components such as pumps, valves, ball valves, containers, meters, etc., from contamination during the critical start-up phase caused by welding beads, metal shavings, sealing residues, grease, and other small particles. After the start-up phase, they can be removed again...

...Our work can be carried out both in our facilities and on-site. We use dry ice, glass beads, walnut shells, and corundum as blasting media. The cleaning process using dry ice blasting offers the following advantages: short downtime, cleaning in assembled condition, chemical-free cleaning, and the ability to clean sensitive components. MUYO offers a trial blasting service for your components and machines.

...Regardless of the type of media you use (alumina, glass beads, silicon carbide, plastic beads, or organic materials, etc.), blast booths designed for continuous blasting will undoubtedly increase your production and reduce your costs by replacing manual, labor-intensive processes such as grinding, chemical cleaning, acid etching, wire brushing, and deburring. Here at Proton, we offer a wide range...

...Dome and startup filters can be used as startup protection in pipes, and they protect downstream system parts, such as valves, pumps, meters, etc., in the critical startup phase against dirt accumulation from weld beads, scale, rolling-scale parts, sealing residue, lubrication grease, etc. The dome and startup filter can be removed after the startup phase, e.g., during the first revision. Dome...

...Materials are cleaned of impurities, heat tints, welding residues, and grinding marks through fine blasting with glass beads, resulting in a matte-glossy, homogeneous surface. Glass bead blasting: Stainless steel, aluminum, copper, brass, and all other non-ferrous metals are cleaned of impurities, heat tints, welding residues, and grinding marks through fine blasting with glass beads, achieving...

...With the laser light cutting process, profiles, weld seams, adhesive beads, surfaces, etc. can be inspected for contours and surface defects. High-resolution cameras with up to 25,000 images per second ensure defect detection in the range of 1/100 mm. A significant advantage of these systems is their insensitivity to ambient light, surface reflections, and fluctuating colors.

...peristaltic pumps, gas supply control programs, and computers. The system consists of 12 fixed-bed reactors, each with a working volume of 10 ml. The fixed-bed reactors are fitted into a compact 1.5 L media conditioning vessel. The fixed-bed material consists of highly porous glass beads or another suitable carrier material and is located in the fixed-bed reactors. The cells are transferred onto the carrier material in the fixed-bed reactors, grow and multiply in, around, and between the carriers, and can be used for further tests and investigations.

...We offer the following blasting methods: trough blasting with steel balls and glass bead blasting with glass beads of 100-200 grit.

...For solid color coatings and for tinting white water-based dispersion paints. Stylish colored glazes as well as effect glazes enriched with metallic, pearlescent, and glass beads.

...A luxurious and highly concentrated treatment with high-tech active ingredients for optimal firming results. Platinum Matri-XEM, Matrixyl™ synthe‘6™ and Tens‘Up™ stimulate the synthesis of various collagen types in the dermis and the epidermis and leave the skin with a visibly smoother appearance. Fine ruby?beads create that special luxurious feeling on the skin.