load testing Germany

... 2,000 bar and 10 Hz can be generated. With the test circuit for hydrostatic and burst pressure tests, pressure ramps up to 3,000 bar can be generated. It is operated on a support arm PC. For pressure tests according to EG79 / EU406 – Section 4.2 Pressure booster for additional supply Displacement volume max. 15cm³ Frequency up to 10Hz Pressure Load Changes as sine & trapezoidal curve...

...Power electronics testing, simulation of grid fluctuations & electrical loads - EOL test bench for electric charging stations and their power electronics to simulate different electrical loads and grid fluctuations. The test bench features automatic contacting and achieves high testing throughput in end-of-line operation. Various types of power electronics for electric charging stations can be tested. On the software side, Merecs Engineering relies on NI-LabVIEW and NI-TestStand.

... for each loader assures true 90-degree force application to eliminate force angle error in testing. In addition, the loaders mechanical advantage reduces technician effort and fatigue, particularly in high-capacity tool testing. SR Mechanical Loaders use the highest quality ball screws to assure smooth operation and extended service life. Welded steel frames and rigid transducer mounting plates assure torque load is properly resisted. Optimized gearing selection reduces physical effort to operate, enhancing productivity and ergonomic safety.

... product meets all requirements before it goes into operation. Vibration tests can be conducted with load types such as sine, noise, sine on noise, and noise on noise according to your individual specifications or testing standards. Example standards: DIN EN-60068-2-6 DIN EN-60068-2-64 MIL-STD-810 Method 514 RTCA/DO-160 Section 8 DIN EN 61373 DIN EN 60945...

... vacuum suction) to 5 (RK Duoline Clean 80 Z without 0.5 m/s vacuum suction). All the requisite cleanroom suitability tests were conducted at the Fraunhofer Institute for Manufacturing Engineering and Automation (IPA) in Stuttgart. Key features RK DuoLine Clean All external steel parts nickel-plated or made of stainless steel Suitability according to EN ISO 14644 -1 for clean rooms Optionally with or without vacuum suction High efficiency Low no-load torque Central lubricating Access ...

...Multidimensional adjustment force measurement in the assembly process Vibration test benches for dynamic loading Vibration test benches for noise development under dynamic load Additional features: - Wear testing devices - Endurance testing...

...Load testing and capacity assessments of battery systems, including individual cell measurements.

...Raw material / packaging incoming inspection, in-process controls, final inspections, long-term stability tests according to GMP guidelines Microbiological laboratory and tests Load tests, preservation settings...

... with one-hand swing door technology for the active storage of canisters and containers in accordance with TRGS 509 for filling and transfer points, safe media extraction in small containers, and supply directly at the workplace Type testing according to DIN EN 14470-1 and DIN EN 14727 by recognized testing institutes (TÜV Süd, iBMB Braunschweig) Classification Type 90 according to DIN EN 14470-1...

...High-precision testing technology "Made in Germany", ground testing in narrow trenches (compaction testing quick and safe)...

...In the event of a power outage – a so-called blackout – that cannot be bridged by UPS and battery systems, emergency backup power systems come into play. We conduct needs assessments that establish the structural and electrical requirements for the installations. In doing so, we develop the integration of diesel engines and electric generators, the ventilation of the technology, the noise protection requirements, diesel or heating oil requirements, as well as requirements for trial operation under partial or full load and grid feedback.

...Article number: AS_3377 The DESABAG Big Bag 100x100x200cm with inlet/outlet for easy and precise emptying of loose bulk materials SF 5:1 Material: UV-stabilized polypropylene fabric uncoated Mini Big Bag / garden waste bag 200 l volume without print top open, bottom closed 2 hand loops on top and 2 discharge loops on the bottom approx. 10 cm 1 helper loop in the middle, approx. 10 cm Size: 55 x 85 cm SWL: without load testing Fabric thickness 170 g/m² Empty weight: 0.48 kg...

...In collaboration with our partner WaterWeights® and our own WaterWeights® water weights, we offer you the testing of cranes, boats, gangways, and platforms.

...Special testing facilities allow for load tests on these components during ongoing production operations, which reduce vehicle weight and contribute to fuel savings.

...Nominal force 10 kN axial compressive load; Stroke 800 mm (spring drive); freely programmable digital control; automatically running programmed test processes and their evaluation using force and displacement sensors.

... just 15 minutes - Only a low viral load is necessary for detection - Infected individuals can be identified even before they develop symptoms Complements the Influenza A/B and SARS-CoV-2 antibody tests excellently PPN international 111687914190 PZN national 16879141...

...Document your compressed air station with: Compressed air consumption chart Pressure diagram Compressor running times for: LOAD and IDLE Overall chart Energy table The weekly chart Provides an overview of compressed air consumption for each day. Each individual day can be selected with a mouse click. The calculation table shows: Load and idle times Kilowatt hours generated cubic meters Costs in every currency Compressed air costs € /m³...

...-coated steel, color: gray, RAL 7035. The tabletops are melamine-coated on both sides with a thickness of 25 mm, color: gray RAL 7035. The workbenches are also available in ESD versions. A wide range of accessories allows for a customized setup to meet your specific needs. Load capacity: 200 kg Code: WB815 C Tabletop width: 1500 mm Tabletop depth: 800 mm...

...Your temperature testing chamber for load and aging tests Temperature testing chambers - from tabletop models starting at 25 liters to floor-standing units up to 3500 liters or even walk-in? Temperature range: -40°C to +180°C // -70°C to +180°C Temperature change rate: Cooling: 2 to 6 K/min Heating: 2 to 6 K/min Higher values desired? See stress screening temperature chambers Didn’t find your requirement? We would be happy to advise you personally and equip your temperature testing chamber according to your specifications.

... turned. The ergonomic octagonal shape of the base allows for easy installation using a standard open-end wrench. 100% crack-tested. Complies with the testing principles of BG GS-0A-15-04. Like the TITAN anchor point, the X-TREME anchor point has 100% load capacity in all pulling directions. The X-TREME anchor point is not suitable for continuous rotational movement under load! Item number: TH-F34306 Thread: M10 Vertical load capacity: 0.9 tons Thread length mm: 15...

...MOSO® Angle Bracket Anchor WK-D with General Building Authority Approval Z-21.8-1892 The MOSO® Angle Bracket Anchor WK-D with adjustable pressure screw is the perfect solution for supports with continuous angle rails. The adjustment screw allows for easy compensation of concrete unevenness. Height Adjustment: +/- 25 mm Load Stages: 3.5 - 25.0 kN Material: Stainless Steel, Corrosion Resistance Class (CRC) III Proof: Load anchor head according to DIBt approval Z-21.8-1892 type testing or static calculation Wall Distances: 20 - 370 mm, larger on request...

... with LAN, CAN, and GPIB interfaces, controllable via SCPI commands. For safety, current, voltage, power, and temperature limits, as well as reverse polarity protection, are built-in. Operating modes: CC, CV, CR, CW, CC+CV, CR+CW Load simulation for LED drivers, battery test mode, short circuit function, transient operation, dynamic testing, storable profiles, curve diagrams, long-term diagrams, data export in CSV format.

... suitable for passive isolation of measuring and testing machines, individual building components, up to entire buildings (earthquake protection). Specifications Load capacity FCd per spring package: 0.07 kN to 20.11 kN Natural frequency ne vertical: 2.6 Hz to 4.2 Hz Isolation efficiency up to 90% Amplitude damping made of plastic or viscous mass Optional height leveling With and without preloading Additional Features The ISOFED steel compression spring program is characterized by its versatile modular system.

...We offer our customers the leasing of our test bays for testing your machines and systems.The above-mentioned machines can also be coupled in sets of three so that even higher outputs are possible. At LDW we also have several DC machines with other speed ranges and lower outputs. We also have three-phase load machines with speed ranges from 750 to 3,000 1/min at an output range of 1,400 to 3,000...

... structural stability! Determining the total service life is particularly interesting when the wind farm configuration changes, thereby affecting the load on the existing facility. We will inform you to what extent the service life of a facility is reduced due to additional turbulence from pre-existing installations. Furthermore, determining the total service life also plays a significant role when the revenue or repayment phase needs to be extended due to individual circumstances.

...Vertical clamps ?Longlife? GN 910 represent an advancement of the standard GN 810. Instead of being made from sheet steel, the clamping and lever arms are made from precision castings or forged in dies. The other sheet steel components have been reinforced, and the pivot pins and bushings are hardened and ground. For this reason, these clamps are suitable for applications where high forces occur, especially where a long service life is required. Extensive testing has shown that flawless operation (under load) is guaranteed even after one million clamping cycles.

...Your task ... our solution - Load and failure testing with measurement data logging - Defined energy input in test specimens - Subjective and stochastic durability tests - Lifetime testing - Real-time quality monitoring systems - Computer-based evaluation systems for quality control...

... special dimensions. With an in-house chamber furnace, the necessary heat treatments are carried out. Welding facilities with welders certified according to EN 287 and a subtractive manufacturing process complete our production range. For testing raw materials, products, and supplied parts, we have modern testing facilities available. Quality assurance measures are implemented by all departments. The quality achieved is verified through product and process testing. All processes are subject to a QM system according to ISO 9001.

...{"* Development":"Over 90% of our products are less than ten years old. Intensive testing precedes any product changes, including various forced load tests according to DIN standards as well as practical application trials. This allows for the use of the latest raw materials and manufacturing processes while ensuring optimal quality.","* Equipment":"Over 20 underground and above-ground tanks...

... already developed and implemented custom solutions for many clients. The testing, calibration, and verification of scales are part of our service. With our complete solution, we take over the monitoring of testing equipment for our clients, allowing them to focus on their core business. Innovative performance drives us to continuously develop new products, some of which have already been patented. Our quality management is certified according to DIN EN ISO 9001:2015.