flow control valve Germany

...Electromagnetically operated pinch valve PPV 7 (NO) with high flow rates and precise control. The 2/2-way NO pinch valve clamps tubes with a Diameter up to 7mm and depending on the used material (PVC / Silicone) up to 1.5mm wall thickness. It has a clamping force of 42N. Solenoid weight:1300 g Dimensions:84 x 53 x 146  Design:2/2 way  Mode of action:NO  Diameter hose:4 to 7 mm Nominal voltage:DC 24 V Duty cycle:100 % Power consumption:18 W Thermal class:B 130 °C  Clamping force:42 N Connection:Lead 20 cm ...

... the fine gradation of the KV values, are essential for accurate regulation. Kynar® (PVDF) and PVC are available as housing materials. Nominal sizes of 1/4" and 1/2" NPT are available. The valve flow rates KVS can be used as follows: for 1/4": KVS 0.003 - KVS 0.27 in Hastelloy C, Titanium, Tantalum for 1/2": KVS 0.043 - KVS 2.15 in Kynar® or PVC KVS 0.003 - KVS 2.15 in Hastelloy C, Titanium, Tantalum...

... flow. The fully automatic medium-controlled STRATE relief valve EVA has been specially designed for this procedure. As well as not requiring any maintenance, the STRATE relief valve EVA is an extremely economical device for reducing load during start-up since there is no longer any need to use complex externally controlled valves or electronic start-up aids. Product features Fully automatic control Specialized material G-AISi9Cu3 - specific to the requirements With solenoid valve for different motor speeds With overpressure valve For higher pressures and temperatures ...

... materials: PMMA, optional: PEEK™; valve: PEEK™, FFPM optional: PPS, FPM, EPDM; volume flow sensor: borosilicate Seal materials: FPM, optional: EPDM, FFPM Electronics: ARM Cortex M3 microprocessor Motor: brushless DC-motor (BLDC); nominal voltage 24 V, torque 3.3 mNm; analog hall sensors Electrical connection: D-sub plug, 15-pole (male connector) Power supply: 24 V DC ±10 %, max. 1.5 A Interface: RS-232...

...Control valve and Flow indicator for use with calibration gas cylinder. Flow meter markings are nominally 0.5 & 1.0 litres/min.

... of bronze/stainless steel, in accordance with the regulations of the Drinking Water Ordinance and the recognized rules of technology such as DVGW, DIN, EN, ZSVHK, VDI, as well as the requirements of AGFW and the technical connection conditions (TAB) of the respective utility company. With thermal insulation (optional) With control cabinet Thermomatik or control via the building station Connection variants selectable Performance range according to hot water demand.

...Highly accurate for both small and large flow rates. Pressure and temperature compensated through the thermal mass flow principle. Quick and easy installation via a standard ½" ball valve. No moving parts, thus low maintenance. Negligibly low pressure loss due to minimal blockage of the diameter.

...Series / Type 63 2/2 way externally controlled valve. Function: In rest position, the valve is closed by spring-action and fluid pressure. When the actuator is pressurized, it lifts the control piston and simultaneously raises the valve disc – the valve opens. Valves of this type can also be supplied with the function of being opened by spring force. Additionally, there is a double-acting piston actuator that allows for flow in either direction. Technical Data: Connection: G 1/4" - G 3", DIN ISO 228 *1/2" + 3/4" Rg5 DIN 2999 Installation position:...

... protection of the oil sample from manipulation or contamination during the bunkering delivery. Additionally, manual valve operation is not restricted, and a flow control allows for necessary adjustments to be made. Features: • Material: high-quality stainless steel (SUS304/1Cr18Ni9) • Size: 4” – 12” • Weight: 8 – 28 kg Benefits: • Representative fuel samples • Continuous sampling during the bunkering process • Easy installation on all common flanges...

... the pump is guaranteed even in critical operating situations. The bistable jump valve prevents problematic intermediate positions of the control valve. Savings on Compressed Air Costs Optimized geometries with minimal dead spaces and extremely low starting pressures from 0.7 bar reduce energy consumption to a minimum. Minimal Maintenance Costs The durable short-stroke membranes, the low-wear ceramic slide valve, and the maintenance-friendly design of the pump guarantee extremely low service costs.

... conveying system and its interfaces (discharge system) and separation (filter), along with the corresponding control and safety devices. In principle, we differentiate between low-pressure or thin-flow conveying using a radial fan as a compressor with a shut-off valve, and high-pressure conveying or dense-phase conveying using a rotary lobe blower.

...We have numerous methods for handling low-viscosity single or two-component materials, suitable for touch-ups, repairs, or revisions in critical areas. The Sempen® applicator is designed for the convenient storage, mixing, and application of two-part topcoats and primers. The materials are separated by a barrier that is removed before use to ensure thorough mixing. The spring valve provides excellent control over the material flow. The Sempen® applicator holds up to 10 ml of each component.

...All models are specifically designed according to the existing cooling water network and can be delivered with a capacity of up to 150 kW. The standard models are all equipped with a bypass, manometer, and flow switch for flow monitoring. In the event of any disturbances, the device will shut down. Temperature control occurs on the secondary side, where a motor valve automatically regulates the...

...filling, dozing, transfer, supply Joint pumps for flow-rates up to 6 tons Remote operations: Monitoring, remote control, power control Technical Data Capacity: 400 - 1500 kg/h, 6-25 lpm, 1.7 -6.6 gpm Power supply: 3 x 400V / 50 Hz, opt 120 / 208V, opt. 277 / 480V/60Hz, 3-phase Power consumption: 1.5 to + 4 kW/h (dep. on pump size) Dimensions (LxWxH): 900 x 900 x 1670 mm / 35 x 35 x 66 in. Pump Triplex plunger pump NP 25/50 – 25/70 Motor: Belt drive Construction characteristics CO 2 supply: liquid from tank system Ring- or stub lines Automatic start cycle Pressure supply needed for valve: 8 b...

...and the pressure regulator line QualityReg. Since 2016, we have expanded our product portfolio, including the development, approval, manufacturing, and marketing of gas mixers for oxygen gas mixtures (O2 / N2O / NO) in modular design. 2020 was a year filled with challenges. To support ventilation, we upgraded our gas mixer to a High Flow Oxygen System for NIV and CPAP ventilation. We focused on new developments and will introduce a HYBRID MIXER (mechanical gas mixer with electronic control and data interfaces), the QualityMix Pro, in 2022. YOUR DEHAS MEDICAL SYSTEMS TEAM...

...Suzhou NOVA Valve Flow Control CO.,LTD is located in Suzhou, China. NOVA valve specializes in industrial fluid control systems and is an R&D and manufacturing company for industrial valves. We offer products such as Gas Samplers, Ball Valves, Sampling Systems, Gate Valves, and more. NOVA Valve develops, produces, and markets sampling systems for liquids, gases, and liquefied gases. We are highly...

...GWR, Ultrasonic, Capacitance, Magnetic Float - Level Switch - Vibronic, Ultrasonic, Capacitance, Float, Rotatory - Peddle Switch - Membrane / Chute Level Switch - Recorder - PID I to P Converter - Valve - Control Valve, Globe Valve - Air Filter Regulator...

...The company history of Mertik Maxitrol describes a 130-year tradition in the development, production, and distribution of technically advanced control and safety components. As early as 1903, a patent was granted for a "self-closing valve with adjustable spring load for pipe breakage," a precursor to the widely used gas flow monitor SENTRY GS today. Mertik Maxitrol and its American partner...

KVT Kurlbaum AG is the specialist for wear and protection technologies. In the valve industry, KVT offers: • Sealing rings • Balls • Switch shafts • Axial bearings • Housings In the drilling sector, KVT provides: • Stabilizers • Ribs In mechanical engineering, KVT supplies: • Shaft protection sleeves • Piston rods • Plungers • Decanters • Splitters • Wear plates In the high-pressure valve sector, KVT offers: • Control valves • Shut-off valves • Check valves • Gas flow control valves...

... - Info displays and multifunction displays - Speedometers - Instrument clusters - Central control unit - Comfort control unit - Transmission control unit - Convertible top control unit - Throttle valve - Turbocharger - Turbocharger actuator - On-board network control unit - Seat control unit - Door control unit - KESSY control unit - Tailgate control unit - Trailer control unit - and much more. We...

... displays and multifunction displays - Speedometers - Instrument clusters - Central control unit - Comfort control unit - Transmission control unit - Roof control unit - Throttle valve - Turbocharger - Turbocharger actuator - On-board network control unit - Seat control unit - Door control unit - KESSY control unit - Tailgate control unit - Trailer control unit - and much more. We stand for reliable...