energy recovery system Germany

...In a manufacturing operation, energy costs are becoming increasingly important. To reduce the costs of thermal energy, we at Hellmich have developed a robust and low-maintenance heat recovery system for thermal processes in the industry. The flue gas-air heat exchanger operates on the principle of cross and counterflow: flue gases flow past the walls made of rectangular pipes installed in the...

...Heat recovery, which refers to the reuse of waste heat generated during energy production, helps to reduce energy consumption and increase efficiency. Typically, metal pipes are used for heat recovery. However, many industrial fuels contain acid-forming substances such as sulfur. During combustion, an aggressive, vaporous acid-water mixture is produced, resulting in a reactive condensate. This...

...The combustion air pre-heater withdraws the residual energy from the flue gas and therefore pre-heats the combustion air of the boilers. This considerably increases the level of efficiency of oil/gas fired boilers and extends the life of the units. The combustion air pre-heater is designed as a bare-tube heat exchanger. This facilitates high heat transmission to the combustion air and guarantees easy cleaning of the heating surfaces.

...customer-oriented consulting - consumption analyses and economic efficiency assessment - monitoring system safety - heat recovery for: compressors, cooling systems, refrigeration machines Discover the performance that not only benefits the environment but, above all, pays off for you. So take advantage of the energy source of the future: energy efficiency. - customer-oriented consulting - consumption analyses and - economic efficiency assessment - monitoring system safety - heat recovery for: - compressors - cooling systems - refrigeration machines...

...Exhaust heat exchangers from N-thalpie GmbH are used in heating and cooling systems (mostly in industrial plants) to extract thermal energy from exhaust gases and utilize it for heating water or air. This process enhances the energy efficiency of the system by recovering waste heat that would typically be lost and using it for cost-saving purposes.

...• Complete oil recovery at the source • Clean fluid system • High biostability in aqueous coolants • Long filter service life o High absorption capacities due to depth filters o 120-150 m² filter surface area per gram o Excellent dirt-to-euro-per-kilogram ratio o Filter change without production interruption • Filter material made from 100% natural fibers – 0% metals, 0% plastics o Complies with the requirements of the Circular Economy Act o Waste code 150202 • Modular design • Low energy consumption • Easy installation and operation...

...Quick and easy installation of energy recovery through DC-Link for drives...

... than 150 Pa pressure loss. The heat recovery system provides a total thermal output of 450 kW at a temperature difference of 30°C, while only 16 kW is required for the supply air fans. Supply air filters with automatic filter monitoring ensure clean, insect-free supply air. Through an adiabatic cooling system in the supply air duct, cooling of up to 8°C is achieved with an energy input of only 1.5 kW.

... functionality and efficiency of a ventilation system, the tightness of the installed ventilation ducts is a crucial requirement. Leaks in the duct network prevent targeted air distribution within the building, resulting in the planned good air quality not being achieved. The efficiency, especially of ventilation systems with heat recovery, deteriorates due to leaky ventilation ducts. The Micro Leakage Meter (MLM) can reliably locate leaks in the duct networks of ventilation systems and eliminate them as part of quality assurance.

... the Machinery Directive and CE standards. Our systems are characterized by a modular design. This saves material costs and ensures quick assembly. We design systems with constant availability and minimal maintenance effort. With processes for energy recovery, heat, and powder recovery, we ensure resource-efficient operation of your system.

...Energy savings are the central theme in the redesign of coating systems as well as the retrofitting of existing systems. Not only can operating costs be reduced, but also investment costs through the use of heat recovery systems. Alongside this economic advantage, there is also an ecological benefit for our environment. Less heat is generated, resources are conserved, and emissions are significantly reduced. Cross-flow or rotary heat exchangers - depending on the application, efficiency, and space conditions - are integrated as energy-saving components into the overall system concept.

... only. As an alternative to a manual spraying station a single robot can be used for complex geometries. The technically sophisticated paint recovery system achieves maximum efficiency. The recyclability of the recovered overspray and the considerably reduced use of cleaning agents provide an impressive energy balance. In addition, the efficient ventilation technology noticeably reduces the...

... building. The kitchen air is cleaned to such an extent that disturbances are eliminated. A desirable side effect is the use of heat recovery, which can utilize the energy-rich exhaust air to offset the costs of the entire system technology.

HTT is your competent partner for thermal oil heaters, thermal oil systems, heat recovery, and system modernization. Specifically tailored thermal oil heaters, thermal oil systems, and thermo oil plants from HTT solve every process heat problem. They are flexible in application, individualized in design, environmentally friendly, and economical. HTT delivers energy-efficient solutions for...

... example in the EPP area, to enable more energy-saving production. The waste heat we generate is captured through a specially developed heat recovery system and redirected back into our production. Nevertheless, we are aware that the raw materials we use are based on petroleum and are therefore finite. As a plastic processor, we are conscious of this responsibility. We strive to work as...

... and lubrication technology – sheet metal forming machines, hydroforming – energy technology / heat recovery systems – environmental technology / filtration technology we now address a variety of companies from diverse industries.

... ventilation system: • Air intake towers • Spiral ducting • Flat ducts • Aluminum flexible ducts • Insulated flexible ducts • Weather protection grilles • Disc valves / exhaust valves / supply valves • Roof elements: louvered hoods / roof hoods / deflector hoods • Pipe clamps / ventilation clamps • Central & decentralized ventilation systems for controlled residential ventilation with heat recovery (KWL) You can find our shop at: https://intelmann.net/ If you have any questions or need technical advice, please contact us: +49 (0) 4263 912 777 0 info@intelmann.eu...

... painting systems. We supply and install all components such as cabins, supply and exhaust units, filter ceilings, and extraction walls. Likewise, systems for heat recovery to save energy and costs. System Planning, Consulting, Installation: Competent + Reliable As experienced system builders, we provide you with thorough advice and present solution proposals for each individual case. We design...

... energy from the building. While centralized ventilation systems were long considered the optimum for residential ventilation, decentralized ventilation solutions are now gaining popularity due to various advantages. The Leaf Ventilation brand is committed to the development, production, and distribution of decentralized systems for continuous and user-independent residential ventilation. As a...

Tank cleaning, tank protection, tank rehabilitation, tank systems, tank inner linings, tank dismantling, tank system inspection, tank room rehabilitation, tank inner coating, LWG maintenance, leak indicators.

Wholesale of compressors, piping, specifically AIRnet (Airnet system, aluminum piping system) from Atlas Copco (Mark, Alup) and heat recovery systems for screw compressors.

...The GEA Westfalia Separator Group is a company of GEA Group Aktiengesellschaft, which is one of the world's leading system providers for food and energy production.