cast stainless steel Germany

...Structure: Single-layer multi-layer bellows, both sides screwed cast iron galvanized with internal thread. Optional: Multi-layer bellows. Materials: Bellows made of 1.4541, optionally 1.4571. Screwed cast iron galvanized, optionally 1.4401. Pressure ratings: PN 10 (BD 10 bar, BT 20°C). Nominal diameter and lengths: Nominal diameter DN 15-DN 50, standard lengths according to table. Optional: Special lengths.

... sufficient, there is a twin top part FB-HO2 and FB-HO2A for each variant. The installation part FB-HE has been developed for narrow precast concrete elements. For smaller load levels and simultaneously large concrete cores, MOSO® CE anchor rails are a cost-effective alternative to the installation part FB-HE. Load levels: 6.0 – 70.0 kN Material: approved stainless steel Verification: construction approval...

...Material: Gray cast iron GJL 200. Threaded pin stainless steel 1.4305 (equivalent to AISI 303). Cross pin stainless steel 1.4310 (equivalent to AISI 301). Execution: ground, polished. Threaded pin and cross pin polished. On request: Star knobs made of gray cast iron, plastic-coated. Form A: Blank Form B: Through hole Form C: Blind hole Form D: Thread reamed Form E: Threaded blind hole Form L: With external thread...

...Belven is a manufacturer of swivel valves based in Belgium, operating for over 40 years. As a leading distributor, Ahrendt Industrial Valves also carries out the automation of the valves with pneumatic or electric swivel drives in its own workshop. In addition to the Belven shut-off valves BV10 and BV12, high-quality Belven ball valves type BV4 made of steel and stainless steel are also available, featuring extensive certifications such as ATEX, Nace, TA-Luft, ADR, and SIL or fire safe.

...A flexible and cost-effective way of connecting tubes to each other reliably and stably. RK Rose+Krieger developed the precision-cast stainless steel tube connectors specially for heavy loads and impact-resistance. The high-strength tube connectors are resistant to high temperatures and corrosion, and are engineered for dynamic loads. An electrochemical passivation – the tube connectors are...

... & CONEC SlimCon connector series from CONEC represents a consistent evolution of the design for industrial use, even under extremely harsh environmental conditions. The design of the connector in a single-piece housing made of zinc die-cast makes it an extremely robust mechanical interface with reliable protection against splashes and dust in aggressive environments. Housing material: Tinned brass, stainless steel Number of contacts standard: 9-, 15-, 25-, 37-, 50-pole. Number of contacts high density: 15-, 26-, 44-, 62-, 78-pole. Quality level: 1-3...

...The waffle maker with 2 cooking units in the shape of Brussels waffles stands out not only for the high heat conductivity of the cast iron plates but also for its robust structure and power. The two separate on/off switches also allow for easy and tailored use. Material: Stainless steel Plate material: Cast iron, enameled Separately adjustable cooking units: 2 Plate model(s): Fixed Waffle shape: Brussels waffle Temperature range from: 50 °C Temperature range up to: 300 °C...

... harshest kiln environments, the MP150 linescanner, which is used in the CS210 thermal imaging system system, is designed with a rugged cast aluminum housing and mounted in a robust stainless-steel enclosure. Measured temperature range:100...650 °C (burning zone 700...1800 °C) Temperature resolution:0.1 K Accuracy:±0.5% of reading or ±3 °C Spot detection (50% of energy):450 : 1 (2.2 mradians...

...You can also purchase fastening materials for flat connection options for the WfW perforated sheets: We offer the following variants for material thicknesses of 1.5 - 2.0 mm and 3.0 - 4.0 mm: - Zinc die-cast - Powder-coated zinc die-cast in the color of your perforated sheets/railing infills - Stainless steel All variants include two rubber inserts and two countersunk screws M6x16 each. Please select your variant.

...CNC Machining CNC Turning up to a diameter of 740 mm and a length of 1,600 mm CNC Milling up to table size 1,600 x 1,000 mm Horizontal CNC Machining Centers up to pallet size 800 x 800 mm Cast Parts with Machining Gray Cast Iron Ductile Cast Iron Special Castings Stainless Steel Castings Investment Casting...

...Since 1947, we have been engaged in the processing of various surfaces. We grind, polish, brush, and deburr all types of metal parts such as fittings, construction and furniture hardware, lighting components, cast parts, automotive parts, aerospace parts, components for the medical and food industries, etc., made from steel, stainless steel, brass, aluminum, titanium, die-cast, and other...

...in round and hexagonal design Dimensions Metric ISO trapezoidal thread according to DIN 103 TR 10 x 2 – TR 60 x 9 Materials Automatic steel 11 S Mn 30 + C 11 S Mn Pb 30 + C Stainless steel A1 1.4305, A2 1.4301, A4 1.4401/4, A5 1.4571 Brass Ms 58, red cast iron Rg7 Special materials available upon request...

...High-pressure valves available in the following designs: – with flanges – with welded ends Distributor partner of Persta Housing materials • Cast steel • Stainless steel • Heat-resistant steel • Special materials Internal components • Stainless steel Seat seals • Metallic Nominal diameters • DN 10-500...

...Travel path X/Y/Z 730/730/880mm 2 pallets 500 x 500 mm We process all common types of cast iron and steel, non-ferrous metals, as well as high-strength materials. Our specialization lies in the machining of cast and stainless steel. About this product: With our modern CNC machine park, we solve highly complex machining tasks with the utmost precision.

... Mouthpieces: 10/24 (in working position) Mouthpieces: 10/18, 10/27, 10/32 (on the pliers housing) Weight: 480 g Total length: 275 mm Device stroke: 8 mm Working range up to 5 mm aluminum and 4 mm stainless steel...

... standard Teflon coatings. Our new DURAQUARZ ® coating is perfectly suited for this with its resistance up to 450°C... Easy and quick cleaning: simply wipe with a damp cloth or place in the dishwasher (dishwasher safe). Depth: 95 mm Weight: 1285 g Material: Cast aluminum with complete DURAQUARZ ® non-stick seal and stainless steel handle. Features: Ideal for Asian dishes, quick heating, very good heat distribution, excellent browning.

...Fill-Rite® Hand Crank Pump FR112 for 200 L Drum for Gasoline, Diesel, Alkylate Gasoline, Hydraulic and Engine Oil, approx. 2.4m Anti-Static Hose, Curved Metal Discharge Pipe. Hand Crank Pump by Fill-Rite® Type FR112 For decades, the epitome of reliability and durability. Pump body made of cast iron Integrated stainless steel filter Check valve with anti-siphon feature (lift protection) Flow...

... and temperature, pressure via manometer - Pressure vessel made of specially coated special aluminum - Outer casing made of durable polyurethane - Housing cover made of stainless steel - Maintenance-free technology - Water drainage valve - Suitable for pressure compaction when the heating is turned off Scope of delivery - Compressed air hose - Water drainage hose - Item No.: D3428 (red housing...

... hardened high-alloy steel - Special chains according to drawing Delivery program sprockets: - Sprockets in pre-drilled or finished drilled versions - Sprocket wheels - Taper sprockets - Sprockets made of steel, cast steel, and other materials up to a size of 3,500 mm - Sprockets made of stainless steel - Special sprockets according to drawing (steel, cast steel, stainless steel, and other materials)...

...Honeywell, ...) Technical Data Material: Gray cast iron (GJL-250) Type 305-316; Steel casting (GP240GH+N) Type 350-354; Stainless steel (1.4408) Type 380-385 Nominal diameter: DN15-DN300 Pressure rating: PN10-PN40...

...TIG Welding (Aluminum, Stainless Steel, Steel, Cast Iron) Gas Shielded Welding Stick Electrodes...

...In the field of pipe connection parts, OTTO ROTH covers almost all common dimensions and materials. OUR DELIVERY PROGRAM: • GF cast iron fittings • Steel fittings with threads • Steel fittings for welding • Steel pipe bends – pipe ends • Flanges • Valves • Seals • Pipe clamps • Straub couplings Valves, fittings, pipe bends, and flanges can also be supplied in stainless steel versions, as well as in additional special sizes or special materials. Additionally, we can provide all products with the corresponding certificates upon your request.

...With our modern CNC machine tools, we handle the complex machining of components made from steel, stainless steel, cast iron, non-ferrous metals, and special materials for you.

...We operate on multiple machining centers and manufacture custom solutions from a variety of materials: aluminum, stainless steel, steel, brass, bronze, as well as cast blanks.

... floor plates","Power Transmission:":"hydraulic - chain drive","Construction Site Lighting (performing work in daylight, glare-free)":"","Heating:":"Propane gas pipe burner made of stainless steel","Interchangeable end pieces":"","Remote adjustable gravel spreading device":"","Hydraulic column chassis":"","Drive:":"Hatz diesel engine type 2 L 41 C, soundproofed","Asphalt distributor":"","Generator for construction site lighting":"","Tools for stitch installation":"","Adjustment Height:":"+100 mm to -250 mm","Mounting device":"","Offset Speed:":"up to 12 m/min.","Hatz 4L 41 C instead of 3L 41 C":""}...

... (heattreatment 190°C, 20min) Sealing • Metal/metal • NBR • EPDM (FKM or PTFE on request) Gland 3-piece sealing set: • 1x GFO®-Faser – TWARON® edge reinforced • 1x O-ring (NBR or EPDM or FKM) • 1x synthetic fiber, PTFE-lubricated Knife Stainless steel 1.4301 (304) Stem Stainless steel 1.4305 (304) Function Pneumatic double acting Pressure discharge One-sided Pilot pressure 6bar (lower pressure on...

... a matte-glossy, homogeneous surface. This treatment is suitable, for example, for components/systems used in food production, but also for stainless steel railings, stainless steel control cabinet housings, aluminum rims, aluminum die-cast parts, engine housings, brass, bronze, red brass, and copper. For wooden surfaces, the relief-like structure can be decoratively highlighted.

...Hans Nölke Aluminium and Steel Construction • Arc Welding: Steel, stainless steel, and cast primarily on-site • MAG Welding: Steel, stainless steel, aluminum mainly in the workshop • TIG Welding: Precision welding of stainless steel, aluminum, steel, brass, copper...

...Construction: Stainless steel platform, cast metal housing Features: Removable stainless steel platform, check weighing light with selectable setting and adjustable signal tone volume, integrated underhook weighing hook, front cover against...

... additional measures. When Armaflex Protect is used, the gap around the pipework can be closed with conventional mortar/filler. So there is nothing to stand in the way of a smooth-running building process. Due to its intumescent effect in the event of a fire, the new Armaflex Protect can be used to securely seal off penetrations not only for copper, steel, stainless steel and cast iron pipework but also for combustible supply pipes such as multilayer composite pipes, PE, PE-HD, PP or PVC pipes. Armaflex Protect is a system component working with all Armaflex elastomeric insulation materials...