materials testing Germany

...Customized solutions are one of TIRA's core competencies. TIRA's material testing machines can be designed and constructed according to individual customer requirements.

...The testing machines of the FWP Series are the all-rounders of our product range. With two-column load frames, they are particularly robust and applicable in the medium force segment for most materials. These testing machines are available as table machines and as floor-standing machines. Powerful and flexible, they can be used for tensile, compression, and bending tests in materials research, as...

... methods safely and quickly: • Bureau Veritas Material Testing GmbH • PLR Prüftechnik Linke & Rühe GmbH By arrangement, it is always possible for customer-owned or commissioned testers to carry out material testing in our facility. This is regularly practiced for ultrasonic testing, dye penetrant testing, and magnetic particle crack testing.

...An unparalleled precise method for detecting fine surface cracks in ferromagnetic materials. Cracks as small as 1µ in width can be made visible. Only material defects that are no deeper than 2–3 mm below the surface are detected. Areas of application include: all magnetizable workpieces...

...The InWin gammaprotect fixed glazing with protection against ionizing radiation With the compact InWin gammaprotect fixed glazing, visually appealing glazing that meets high building physics requirements as well as special requirements for spaces such as X-ray rooms, operating theaters, dental practices, and laboratories for research or material testing can be produced in no time. The InWin...

The Society for Materials Testing analyzes components made from all materials in Leipzig. We conduct: Environmental simulation with salt spray testing, climate testing, and thermal shock testing Photogrammetry with deformation analysis, coefficient of linear expansion, and distance measurement Xenon testing Stone impact testing Color measurement and gloss measurement Fire testing according to FMVS...

... resistance, color fastness testing, rub resistance, micro-scratch resistance, pencil hardness testing, and much more are used to monitor and verify quality under stress or in new condition. Additional competencies include material testing, tensile testing, bending testing, and photogrammetry. Burning rate according to FMVSS 302 / DIN 75200 and fire testing according to UL94 are conducted on various materials and classified according to standards.

...Cube molds for material testing in various designs for the production of concrete test cubes according to DIN EN 12390-2.

The PMZ Kassel was established in 2006 as a spin-off from the University of Kassel and as a management buy-in from the ThyssenKrupp Transrapid Testing & Measurement Technology Center. Modern insights brought in by young engineers from the University of Kassel enable us, in conjunction with ThyssenKrupp's know-how and equipment, to digitally implement and apply scientific damage models for determin...

...Impulse pressure tests determine the long-term strength of materials and components under realistic conditions.

...Moisture content, loss on ignition – Particle size distribution – open porosity – Water absorption – Bulk density / Grain volume weight – Bulk density DIN 51081:2002-12 - Testing of oxidic raw materials and materials - Determination of mass change during annealing. DIN EN ISO 26845:2008-06 - Chemical analysis of refractory products - General requirements for wet chemical analysis, atomic...

...Shielding panels against X-rays protect people and sensitive components, which is particularly important in medicine or non-destructive material testing. Until now, cost-effective lead has been the material of choice. However, due to its toxicity, it has become obsolete as a modern radiation protection solution. The current RoHS directive calls for a drastic reduction of lead in electrical...

... in transparent materials such as gemstones ideal as backlighting in combination with telecentric lenses low divergence, high light output Illumination parameters adjustable with vicolux® smart light illumination controller Connection: M8 connector on the housing various mounting options and extensive accessories Order number: 1-33-238...

...These LYPHAN test papers are delivered without a color scale. They are intended for general testing of acidic and alkaline (basic) reactions. A numerically accurate pH value cannot be determined with them. Notebooks with 100 strips are available as standard products.

...nature, black, coming soon: blue and red The goal of surface finishing and coating at Buchert + Feil is to implement the optimal functional and design solution for every surface in outstanding quality. Washing systems according to the latest industrial standards, as well as extensive acceptance, testing, and quality assurance procedures, complete the portfolio. Solid craftsmanship combined with consistent digitalization enables efficient, high-quality production with short, reliable delivery times.

...Competence: Investigation of auxiliary materials in the silicon processing industry (SiC, SiC slurries, Si)...

...Compliance with the standard IEC EN 60811-2-1 (Thermal Expansion and Tensile Testing): ▪ Compact, electric device for laboratories ▪ Designed to cut sample thicknesses between 0.8 mm and 2.0 mm according to standard specifications ▪ Specifically suitable for hard materials Width x Depth x Height::760 x 500 x 500 mm Weight::61.5 kg Material::Aluminum, Stainless Steel Blade::Stainless Steel Blade...

...) • Numerical Aperture o wavelength dependent; for single and multiple claddings • Fiber refractive index profile measurement • Fiber strength tests for fibers with glass diameters from 50 µm up to 1.5 mm o dynamic fatigue: up to 200kpsi proof tension o static fatigue: 2-Point-Bending and tensile method • FTIR spectrometry for fiber and cable coating materials analysis • Evaluation of interference pattern • Characterization of focal ratio degradation (FRD) • Fiber analysis by scanning electron microscope...

...and Fraunhofer Institute Stuttgart according to DIN EN 20140-3. Sound insulation: Multiwal has documented the latest test reports for sound insulation according to DIN EN 10140-2 / 20140-3 laboratory values from international testing institutes.

... industrial branches, including medical engineering, pharmaceuticals, food and cosmetics, the automotive industry and electrical engineering. Feeding systems are an important part of automation technology, as are the isolation and provision of individual components. In addition to simple feeding systems, complex testing, measuring and assembly processes can be added without any problems. Different feeding systems can also be combined thanks to the use of robots and handling systems. In this way, we create a seamless transition from simple part feeding through to compact feeding and testing cells.

... setups, testing, measuring, and production gauges, experimental, assembly, scanning fixtures, and reference gauges. Materials used include aluminum, steel, or lightweight materials. Thus, we cover the entire range of services in the field of fixture and gauge construction. The implementation of customer-specific requirements and their realization with a commitment to quality – that is our goal.

... testing technology, supporting you from the product idea to market launch. To achieve this, we combine our expertise in optics, mechanics, and electronics, offering consulting and tailored solutions for our customers according to product-specific requirements. - Calibration and test equipment management - Precision measurement and sample testing - Materials technology - Device safety - Electromagnetic compatibility (EMC testing) - Environmental simulation: climate, vibration, shock - Chemical auxiliary and operating materials...

... marking Available materials • Ceramics, glass, silicon • Ferrous metals • Non-ferrous metals • Heavy metals PDF link: https://www.lcpgmbh.de/fileadmin/user_upload/Datenblaetter_Designrichtlinien/11_LCP_DB_Auftragsmessen_dt.pdf...

...Bundle Heat Exchanger Construction Features • Removable tube bundle • Materials: Inner tubes: CuNi10Fe Water chamber: Red brass, seawater resistant • Exchange areas from 0.15 m² to 5.79 m² • Inner tube dimensions: 6 x 0.5 mm • Tube side 4-way Conditions • Design pressures: Shell side: 16 bar Tube side: 10 bar • Design temperatures: -10/120°C • Without type testing and without CE marking • Acceptance according to PED 2014/98/EU...

...The company Material Analytics & Consulting Frischkorn e.K. combines academic expertise with industrial implementation power. In addition to our consulting activities as materials scientists for the use of lightweight metals (especially titanium and titanium alloys) and welding technology, we offer extensive equipment for wear and material testing, as well as fatigue testing. As a supplier and...

The company SZM Spannwerkzeuge was founded in 1955 in Zella-Mehlis. Its good reputation has spread increasingly. Today, it is a term synonymous with quality – worldwide. This is primarily based on: - recognition as a supplier of clamping tools with a diverse product range - short delivery times for listed products due to well-managed inventory and logistics - extensive knowledge and experience in ...

... institutions and industrial customers worldwide in the fields of material testing and quality control. The company was founded in 1990 as a spin-off from the former German Construction Academy in Berlin, Institute for Building Materials.

...visualization of magnetic stray fields in material testing and forensics using magneto-optics, and torsion testing on shafts with the torsion tester STT. Furthermore, we are a supplier of magnetic sensor technology: Fluxgate, AMR, GMR, TMR, Hall, and magneto-optical sensors and fluxmeters, as well as high-quality magnetic materials such as permanent magnets (NdFeB, SmCo, Ferrite), YIG (bulk and film), BIG, and laser-optical functional layers on GGG.

Since 1993, we have been providing quality measurement technology for the manufacturing industry and institutes. Our focus areas are moisture and water content determination, weighing technology, and material testing systems.

... at all times. Our tests are supported by collaboration with the materials testing laboratory of the University of Applied Sciences Ostwestfalen-Lippe. Our own OS design department, along with programmed CNC tool manufacturing, guarantees precise and very rapid processing of our customers' requirements for special clamps and prototype construction. Modern manufacturing methods and processes thus...