fluid Germany

...In order to prove the quality of the fluid-carrying parts, all hoses, pipes, pressure vessels and other components are put under pressure until they burst. The process is precisely measured and documented in order to optimally design the components for specific applications.

...diamond marking fluid red | 500 ml bottle Red marking color used as a contrast agent in metalworking to make fine drilling points and marking lines visible. The liquid forms an elastic and evenly covering film on the metal surface to be marked, which does not splinter when scribing. Ready-to-use liquid that leaves a non-glossy elastic film on the surface to be processed within seconds after...

...The Gronemeyer head space moistener permits moisting of the cap with the fluid in the container. Machine dimensions depend on the conveyor performance and the desired moisting time. Moisting occurs during continuous material flow. The machine is a space-saving solution due to the vertical moisting track. The design permits products to run through the machine without turning process, if necessary...

... container. First, individual parts are produced using injection molding, and then they are welded using mirror welding, friction welding, or hot gas methods. Since these are almost always safety components, each container is subsequently tested for tightness. Of course, we also supply, depending on customer requirements, the necessary fittings and complete warning devices that continuously monitor the fluid level, as a complete assembly, including any necessary REED cartridges. The labeling of the containers is usually done using lasers.

...germanBond® CLR CFC-free Applications: germanBond CLR cleaning fluid removes dust, oil and grease from metal and rubber surfaces. It is the diluent for the adhesive germanBond 4kR. Specifications: Density: 0.85 g/cm³ Shelf life: minimum of 24 months Storage requirements: dry, cool, in tightly closed buckets Packing units: 1.5 L - 27.0 L Downloads: Safety Data Sheet germanBond® CLR - English [PDF] Application Instructions germanBond® CLR - English [PDF]...

INOX stands by you as a reliable partner with high innovative strength and chemical expertise, focusing on Made in Germany. Since the registration of our company, we have grown into a leading B2B manufacturer in the areas of Private-Label for additives, lubricants, coolant antifreeze, and specialty chemicals for cleaning processes in the automotive industry as well as in industrial applications.

...Chemical shut-off valves must meet high safety and reliability standards due to the critical media involved. The valves are used for opening, closing, and regulating in pipelines, as well as for the inlet, outlet, or flow of fluid media or gases. Our products meet the highest requirements and operate with low maintenance and safety. made of steel 1.0619 / stainless steel 1.4408 / 1.4539 / 1.4479 /...

...Brilliant printing results with up to 12 colors. Flexographic printing is a very fast printing process, as the ink used is very fluid and dries quickly. The color transfer occurs through the so-called impression cylinder. Due to the versatility of flexographic printing, it is possible to achieve printing results on a wide variety of materials that are not feasible or only limited with other...

...for flushing preservative fluid into the engine...

...protects containers/components against the deflagration of flammable liquid/gas - Installation in pipelines (e.g., in thermal post-combustion systems) as protection against deflagrations in fluid and flammable gas lines. Usable for all substances from explosibility groups IIA1 to IIA with a Maximum Experimental Safety Gap (MESG) > 0.9 mm.

...The shell and tube heat exchangers from N-thalpie GmbH are a commonly used type of heat exchanger employed in various industrial processes to transfer heat between two fluids. They consist of a bundle of tubes arranged within a shell. The operation of a shell and tube heat exchanger is based on the principle of direct heat exchange between the two fluids flowing through the tubes and the shell. One fluid flows through the tubes while the other fluid circulates around the shell.

...Ideal for the chemical and pharmaceutical industry, refineries, and process engineering plants where aggressive media need to be cooled or heated. Construction Features - Separation of media through double tube bundles, mixing of media not possible - Special barrier fluid for very quick leak detection - Leakage system operates independently of installation position - Leakage detection through...

...Recycling System for Drilling Fluid / Bentonite Fluid The recycling system for drilling fluid and bentonite fluid is designed and built according to customer specifications. Various performance classes are available. The recycler consists of a shaker and a centrifuge. It can be set up in a container, on a trailer, or in a skip. A variant in combination with a bentonite mixing system is possible.

...Rolling Bearing Steel Hardened balls made from rolling bearing steel are commonly used in ball bearings, guides, circulating drives, or in valves, making them frequently applicable in the fields of drive technology and fluid technology. Hardened balls have a longer service life and are characterized by their precision. Product Features: Materials: 1.3505 (AISI: 52100), 1.3520 / 1.3536 / 1.3539 Ball diameter from 1 mm to 320 mm Quality classes from G28 to G600 Hardened Special ball designs available  Request order quantity now...

...We are a certified Parker dealer and offer you the complete range of Parker products: Parker Fluid Connectors – Ermeto, among others. Parker Hydraulics - Olaer, among others. Parker Pneumatics – Origa, Legris, Rectus, among others. Parker Filtration - Parfit, among others. Parker Store – Fittings, hose on-site service, among others. Parker Tracking System...

...A light moisture fluid with vitamin c, hyaluronic acid and aloe vera for the care of normal and moisture lacking skin.

... Plunger speed: 1.2 sec. - 20 min./full stroke (speed ranges vary depending on syringe size and tubing) Syringes: Type: XP: 50µl, 100µl, 250µl, 500µl, 1.0ml, 2.5ml, 5.0ml Imprecision: 0.05% CV within run at full stroke (for 1000µl syringe and above) Inaccuracy: <1.0% at full stroke Fluid contact: Glass, PCTFE and Teflon Valve/valve drive: Valve options: 120° 3-port distribution Turn time: 250ms...

...injection fluid for crack filling and waterproofing...

... of the body's own cartilage components, proteoglycans and glycosaminoglycans. Thus, glucosamines assist in the formation and nourishment of cartilage, joint capsules, tendons, and other connective tissues. They also contribute to the maintenance of joint fluid, thereby supporting joint lubrication. Horses Feeding recommendation: 30 ml per animal per day Dogs Feeding recommendation: 2 ml per 10 kg body weight Cats Feeding recommendation: 1 ml per animal per day...

OFS Online Fluid Sensoric GmbH is a medium-sized company with decades of expertise in industrial water treatment. Our goal is to handle the resource of water in an environmentally conscious manner. Our products include analysis, monitoring, and control systems for process water, specifically for water softeners, reverse osmosis systems, as well as steam boilers and hot water systems. Our requirem...

... suitable for your application are characterized by excellent viscosity-temperature behavior, as well as emulsifying and air separation properties. Designation: Shell Tellus S2 VX DIN: HVLP DIN 51524-2 & Bosch Rexroth Fluid Rating List RDE 90245 Container sizes: 20 liters / 209 liters / 1,000 liters & bulk ISO VG: 15...

... workshop hall designed according to the latest standards provided us with the best conditions for complex and demanding repairs of all kinds. Since 2012, FSE Fluid Systems Erfurt GmbH has been certified according to ISO 9001 and the Water Resources Act. Creating a cost estimate after a professional error analysis is a matter of course for us. With our trained and experienced staff, we have the...

CONEXA has been manufacturing hydraulic components in-house for nearly 25 years. The production at all CONEXA facilities meets the high quality standards of our customers and the renowned certification bodies. CONEXA offers a comprehensive range of connecting elements for many industrial applications in fluid technology. CONEXA products ensure lasting operational reliability through precision...

In addition to classic hydraulic services, the company offers comprehensive fluid engineering for its hydraulic and lubrication systems. This includes inspection, maintenance, optimization, system expansion or new construction, and documentation. The trading sector encompasses all components of modern hydraulics, from piping to fittings, filters, accumulators, pumps, valves, etc., up to the finished system.

... length of 3 m and a flow velocity of 30 m/s to hypersonic wind tunnels with a length of 50 m and speeds of 4 to 11 times the speed of sound. HST also offers volumetric flow meters for precise determination of flow rates of various gases, as well as consulting services in all areas of fluid dynamics. The main areas of our work are: • Development and construction of wind tunnels • Industrial consulting in the field of fluid dynamics • Development and small-scale production of flow meters for gases • Development and construction of instruments and sensors for re-entry bodies...

... project: - Interim management within the project - Development of project and organizational structure - Coordination of involved service providers 2) Technical Services / Execution of complete design and development orders - Calculations, design, technical services, and calculation services* * Fluid dynamics calculations * Strength calculations for machine elements...

... been individually created and adjusted for your eye socket. Kryolith glass has been used as the material. This high-quality specialty glass, known in Germany since around 1870 in glass production, is manufactured in the Lauscha color glassworks. Kryolith glass continues to prove extremely advantageous in the field of ocular prosthetics, as it is free from any lead content. This property ensures optimal mucosal compatibility due to the highly resistant surface of the artificial eye against the strongly corrosive tear fluid. Artificial eyes made of glass ...

...WORLD OF MEDICINE offers the complete MIC® device technology from a single source: - Flow & Fluid: Insufflators, Pump Systems, Hose Systems - Vision & Images: Cameras, Cold Light Sources, Documentation Systems, Lasers, U100plus, Gamma Finder® Unique combination of expertise in insufflation and pump technology, camera technology, and laser technology; over 50 patents; high-quality infrastructure in Ludwigsstadt, international standards ISO, EN, GMP, UL.