water on Germany

...The UV measuring device KUV 2.4 WR is designed for the monitoring of UV sensors in water disinfection systems. It is constructed as a robust handheld device, allowing for on-site verification and adjustment of system sensors. The corresponding comparison sensor is used instead of the system sensor or is inserted into a separate immersion tube. The measuring device recognizes the correct...

... kg no. of lamps:6 max. operating pressure:10 bar electrical connection:PURION controll cabinet Model 1: • 3 ~/N/PE 50 Hz 400/230V • L/N/PE 50 Hz 230V total power:6 x 90 W or 6 x 106 W (depends on configuration) current protection:3 x 6A rack:grooved aluminium...

... holding tank with two separator systems Two centrifugal pumps and motors according to type and operating location required Four pump gate valves Two STRATE non-return valves One Y-pipe DN 150 Tank:S235JR (St37-2) Coating:2 component coating on epoxy resin basis...

...All effect columns include single-color LED lighting and a water drain tap. A 12V membrane pump is integrated into the base. Standard base: brushed stainless steel. Please refer to our catalog for sizes and specifications. Special heights up to 4 meters and other base colors available upon request. Additional charge for LED color change with IR remote control.

...-based heat transfer materials are the perfect solution to these challenges. Their high thermal conductivity and resistance to fouling and corrosion ensure safe plant operation. Furthermore, they are approved for drinking water applications according to the German standard (KTW). Depending on customer requirements, we offer either customized profiles including connection technology for use in existing structures or complete solutions.

... trapezoidal forms. Mobility requires reliable cooling and heating systems. These help both people and machines – whether electric or combustion engines – adapt to varying environmental conditions on land, water, and in the air. Climate systems and all their components must endure high load cycles over time. Instead of testing durability in real operation, manufacturers can now flexibly and economically...

...Gravel Retaining Strip 100 / 50 mm: Material: 1.5 mm Aluminum (AlMg3) or 1 mm Stainless Steel (1.4301) Support Leg: 100 mm / Height 50 mm Lengths: 2000 mm Drainage Holes 6.5 x 30 mm, Spacing 60 mm Cutout in the Support Leg 60x78 mm every 200 mm as an adhesive surface. Gravel retaining strips with drainage holes provide a secure and clean separation between the gutter and the filled substructure on balconies, terraces, or roof terraces. They ensure reliable water drainage. This keeps your green roof where it belongs - on the roof.

...By pressing the pulp, a sieve structure is created (smooth on the front / rough on the back), as the water is pressed out of the plates onto a sieve. After the production process, the plates exhibit a high degree of flexibility and strong bending capability, despite having a pronounced level of strength.

... must always adhere to them based on the Water Resources Act and our licensing requirements. IMH holds the WHG §19 licensing and is inspected by TÜV every two years, after which it is approved for another two years.

...Especially suitable for the promotion of: drinking water, well water, rainwater, light oils, heating oil and diesel fuel, cooling emulsions and dielectrics, light acids and bases. NOT SUITABLE FOR GASOLINE! Set consisting of: Submersible pump COMET_IN (break-resistant, shock-proof design; 4 m cable, coarse filter and fine fiber filter) 4 m PVC fabric hose Transformer rectifier 230 V~ / 12 V= or 24 V= with on/off switch Hose clamp Pack of 5 fine fiber filters CE compliant...

...Our bottle rinsing station comes with two rinsing heads and rinses the bottles with cold water. The bottles are manually placed on the holders, and the rinsing is activated by pressing a button. During the rinsing process, which can be set to last between 1 and 10 seconds, the bottles are illuminated from the inside. Upon request, the rinsing station can also be supplied with four rinsing heads.

...For many years, our workshops have been manufacturing gas coolers in the form of star tube coolers. The star tube coolers are equipped in the cooling water area either with homogeneous internal lead lining or with a corrosion-resistant internal coating. The star tubes needed for production, featuring a star-shaped internal profile, are produced at JL Goslar on the extruder press. The...

...Moisture content, loss on ignition – Particle size distribution – open porosity – Water absorption – Bulk density / Grain volume weight – Bulk density DIN 51081:2002-12 - Testing of oxidic raw materials and materials - Determination of mass change during annealing. DIN EN ISO 26845:2008-06 - Chemical analysis of refractory products - General requirements for wet chemical analysis, atomic...

...Cabin Washing System for Bearing Parts Specification: Cleaning Item: Large Bearing Parts Contamination: Scale, Hard Salt Batch Size: Ø x H = 3300 x 1500 mm max. Batch Weight: 10 tons Throughput: 4 batches/h Loading: with manipulator from the front Cleaning Media: Deionized Water Cleaning Process: Flood Washing, Spray Washing, Spray Rinsing 1, Spray Rinsing 2, Recirculating Drying Bath Maintenance: Screen Filtration Heating: Electric Installation Area: L x W x H = 12000 x 4600 x 6500 mm on two levels...

... mixture occur. // What happens when printing with inferior paint? (1) Paint with a pH value < 8.0 The paint dries too quickly on the plates. The machine must be stopped every 1500-2000 sheets/hour to clean the plates. This takes about 15 minutes. With an optimal paint mixture, 5000-6000 sheets/hour can be produced without stopping due to drying. Consequence: cleaning must only be done once per hour instead of three times. (2) Paint with high viscosity (thicker) A large portion of the amines has been lost in the paint....

... mechanic industry. Universal-use-wipe for labs. As degreasing wipe in automotive and paintshop area. In aircraft manufacturing. In workshops, production plants, engineering and transmission manufacturing. In printing industry for cleaning of press cylinders. Abrasion-proof, Absorptive, Capable of oil absorption, Low-linting, Resistant to solvents, Tear-resistant, Water absorption capacity Material:Cellulose with textile character Color:turquoise Plies:1-ply Perforation:Perforated Branch:Trade and industry Dimensions:38 × 30 cm (B × H) Sell Unit:500 sheets VE/PAL:66 Roll(s)/pallet...

...The measuring device Softcontrol Smart for monitoring the water hardness is small, compact and particularly simple for more security of your processes and without constant maintenance of the monitoring device. This compact solution can be installed on any water softener regardless of type and size. The hardness limit is continuously and reliably checked. If the limit value is exceeded, a brine...

...% highly resistant synthetic polyester yarn fabric, manufactured on a special circular loom for extreme tensile stress — fully integrated high-quality thermoplastic polyurethane (TPU is suitable for drinking water), extruded through the fabric (standard color: blue), optimal protection of the pressure support — exterior: very smooth with an extruded applied fastening tape with loops Certifications: — KTW recommendation for category A — DVGW W270 — BS6920-1:2000 (WRAS)...

...We use air-cooled chillers with performance levels ranging from 2.5 to 900 kW/unit. We offer chillers for rent and purchase in various performance sizes. With our integrated pumps in most machines, you save the hassle of an additional power connection for external pumps. What are the advantages for you when using a rental chiller? - no investment costs - quick deliveries based on demand...

...oddesse-propeller pumps are used for irrigation and drainage of agricultural areas, water-level regulation, oxygen enrichment of breeding water at fisheries, trimming of ships, ferries and tankers and so on. EXECUTIONS - Single-stage centrifugal pumps with open semi-axial impeller - Submersible, rewindable and water-filled motors with protection level IP 68 - Motor cooling through...

...Rescue inflatable boats and life jackets are a must for operations on and around water. Not only at sea, but also on inland waters and during flood operations, our life jackets and rescue inflatable boats are indispensable. Whether for the fire department or water rescue services, they ensure the necessary safety for those being rescued and for the rescue personnel.

...Produces deionized water from tap water DEWAPURE is our space- and cost-saving deionized water generator: ALWAYS READY! With a single fill (depending on the size of the unit), up to 5,400 liters of deionized water can be produced at medium water hardness, exactly when it is needed. Moreover, DEWAPURE takes up no more space than a gas cylinder!

...Crepe paper: is a crumpled paper, produced depending on the application from wood pulp, cellulose, or recycled paper; the crumpling increases the surface area of the paper per m² and enhances its stretchability, tear resistance, and liquid absorption capacity; by adding various substances, the paper can become temporarily or permanently water-resistant; crepe paper is very easy to work with...

...EXCOR PERIGOL DW is a corrosion protection oil that contains solvents and is primarily used for the anticorrosive protection of ferrous metals, bare or partially galvanized steel, cast iron, and other types of metal. It has excellent "dewatering" properties (water displacing). On metal parts that have undergone previous machining processes with cutting fluids, EXCOR PERIGOL DW displaces moisture...

...max. 10 bar Temperature: max. 95 °C Equipment: 1 smooth tube heat exchanger, magnesium anode, inspection opening depending on model version with flange or 1 1/2 inch female thread, suitable for electric heating at the bottom (from TWS 150), height-adjustable support feet, analog thermometer...

... trucks or concrete pumps Low noise - low maintenance - low vibrations For cleaning machines at the construction Suction lift max. 5 meters Water connection: 3/8“ Max. water temperature: 50°C optional for chemicals and pesticides Water-Bypass-system Optioanal: Elektric ON/OFF true integrated 12 Volt solenoid valve. This version has an Oil-Bypass. Type Water Output Spin Power Oil Input Weight WHY-1520 15 L/min. @ 210 bar 1750 rpm 5,5 kW 15-40 L/min. @ 210 bar 8-9 kg THY-2715 27 L/min. @ 150 bar 1750 rpm 5,5 kW 15-40 L/min. @ 210 bar 10-11 kg The METROPOLIS unit is a professional...

...recyclable, and available in five colors (white, blue, green, red, yellow). Additionally, the Maxxline Plastic Cryobox Racks offer one of the best in class cryogenic vial storage on the market. They are manufactured from a unique blend of high-quality polypropylene for optimal thermostability and can withstand storage temperatures as low as -150°C and autoclaving at +121°C. All Maxxline plastic...

...Sulfonyl acid Molecular Formula: H2NSO2OH MW: 97.09 CAS No.: 5329-14-6 HS CODE: 28111990 Purity: 99.5%min, 98%min, 95%min; Appearance: Colorless orthorhombic crystal or white crystal Odorless, non-volatile, non-hygroscopic, flammable, low toxicity. Relative density 2.216 (20 / 4 degree) Melting point 205 degree Started to decompose at 209 degree when, at 260 degreethis product will decompose into sulfur dioxide, sulfur trioxide, nitrogen and water. Refractive index of α -1.553, β -type 1.563, γ -type 1.568. ...

... Do not apply below +10°C processing temperature Do not apply on oily residues (on freshly pressure-treated wood) Application: Do not apply in rain or impending rain Shake well before use Apply undiluted with a brush 2-3 coats are recommended Subsequent coats after a minimum drying time of 60 minutes Drying time: 12 hours Clean tools immediately with water...

...followed by disposal. Thus, water cleaning is achieved in no time. For smaller quantities, we recommend cuts in sizes A4 and A3. For regular applications, such as in auto repair shops during oil changes, the absorber can be offered on a roll with perforation for easy tearing off. For applications in the event of spills from, for example, oil tankers, we are happy to provide a customized solution. Please feel free to contact us for more information.