positioning system Germany

... conveniently and intuitively controlled by radio, which is also very efficient. The safety control system combined with radio control can ensure gentle handling and precise positioning of loads. (Smart) tandem:Safe and reliable handling of heavy and bulky loads, Efficient load handling Turning loads:Loads weighing up to 50 t can be turned, loads can be turned by up to 180° Load-sway reduction:Support...

...Positioning table with stepper motor; microscope stage with very good repeatability, travel range of 154 x 154 mm, versions available for various upright microscopes, OEM version available upon request, Controller V31XYZE recommended. Repeatability: +/- 7 µm Travel range: 154 x 154 mm Equipment with encoders not possible. Repeatability: +/- 7 µm Travel range: 154 x 154 mm...

... optimisation This offer includes: Eckold self-pierce riveting system, manually operated • Portable C-frame, weight optimisation up to max. 70 kN incl. nosepiece, 2-hand safety release, hose set, turn/swivel device • Drive unit HA-226 incl. frame, pump unit, control cabinet with 12“ touch panel • Rivet magazine Tools are not included in the scope of delivery. They must be chosen...

...The CS-480 B.flex is the smallest suspension system from BERNSTEIN. And in fact: The 48 mm round tube for the connection of encapsulated IPCs or control enclosures on machines and automation systems is not large. And yet it ensures individual flexibility: Control enclosures or encapsulated IPCs, which are mounted on ceilings, walls or on the floor are often simpler and more ergonomic positioning...

... from uncontrolled extension or lowering of the lift column, RK Rose+Krieger has developed an internal safety system for the Multilift II safety. This essentially consists of a mechanical end stop equipped with a special plastic damper. This safety feature prevents the uncontrolled sliding out of the inner profile from the outer profile of the lift column in the event of a drive failure. Thanks to the new lift column variant, there is no need for an expensive external construction for fall protection.

... touchscreen","Pneumatic system for film cold cutting","Automatic positioning and automatic film roll cutting","Electronic control of the rotation speed of the rotating unit","With infeed and outfeed roller conveyor (powered)","Up to 200 user-specific programs customizable"],"specifications":{"Opening diameter":"420 mm (optional: 620 mm)","Supply voltage":"230 V / 50 Hz","Infeed / outfeed conveyor...

... screw with additional guide and second pivot bearing on the rear rail (V) Upstream double-guided and particularly strong ball screw drive of the X-axis Minimum distance (l) between tool tip (TCP) and front swivel bearing (A) 1-spindle concept guarantees short, stable tools with excellent accessibility to the workpiece and the machining point Generously sized work spindle to achieve maximum performance parameters Stiff milling spindle with additional, patented support Variable steady rest positioning system to increase drilling accuracy with spacer between spindle and steady rests...

... — Future-proof heat supply and options for CO2-neutral operation — Proven and durable Bosch system from a single source — Fuel: Oil, gas, multi-fuel firing, Biogas, bio-oil, hydrogen, special fuels Output:650 to 25,000 kW Safety pressure:up to 16 bar Max. temperature:up to 110 °C Energy source:Gas, oil, bio gas, bio oil, hydrogen...

...High-Precision Mounting and Cover Profiles The control cabinet is at the heart of every system and can contain many different components, depending on the application. In this context, mounting and cover profiles help ensure functionality and safety. Our custom profiles with copper elements and mounting clips assist in securely and precisely positioning the various components within the control cabinet, thereby guaranteeing uninterrupted operation of the electrical system.

... when filling pallets with different containers. The relatively lightweight valves operate at enormous speed and are easy and quick to clean due to only three components that come into direct contact with the medium. This minimizes changeover times to a minimum. What sounds cumbersome and complicated can easily be accomplished by one person in just three steps: — Positioning the pallet — Documenting the container positions via 'teach in' — Starting the filling process...

... 32). Productive and ergonomic •No dramatic flaring of the stainless steel braid •Reduces or eliminates time-consuming manual preparatory work thereby increasing productivity and lowering costs •Centering hose clamp system •Shortest cut possible from 10 cm •Minimizes personnel costs and preparatory work •No wrapping/unwrapping with adhesive tape required •Clearly laid-out user friendly...

... stand, as the material wipes off automatically after punching. The scraper contains two or more disc spring packages that guarantee perfect scraping even in the border areas. A fixed connection between the tool and the upper part of the press is therefore not required. To determine the exact position, each tool has a positioning pin (two for shaped holes) on the underside, which is precisely aligned with the cutting elements (center of the hole). The above picture shows a complete punching unit without cutting elements and one cutting set (punch and die) each for round hole or shaped hole.

...Due to the modular design, customer specific solutions can be realized in a short time. optical system with telecentric or infinite optical path exchangable objectives or turret (optional motorized) motorized measuring stage with 3-axis-joystick for fast and comfortable positioning flexible tube configuration using our component system solid granite base body, steel cover and chassis, portal...

... in the tip area. An adjustable counter automatically stops the machine after the required wrapping length has been reached. The newly developed magazines feature a closing system that can be opened without additional tools. The handling is very ergonomic, and after a short training period, quick and productive operation of the machine is possible.

... the solar array within all desired spatial directions to simulate solar day cycles for example. Atlas offers both low-cost manual remote controls or full automatic alternatives that are integrated into the Atlas software. Positioning systems are typically customized towards the application and local test facility. Atlas will work with you to define the SolarConstant positioning system that will...

... function avoids strap jam EPP 'Exact Product Path' GreenTech energy concept, low power consumption OPTIONAL: Machine movable OPTIONAL:Bundle stop plate for second strap OPTIONAL: Bundle compensator backside OPTIONAL: Narrow products, min. package width 95 mm OPTIONAL: Lateral belts with quick adjustment OPTIONAL: Fully automatic format adjustment, format change in 30 seconds Bundle stop plate with pre-positioning, no contact with bundle when clearing the bundle, with quick adjustment Bundle press, pre-positioning and electric driven Production data analysis via Ethernet/USB SMART TOUCH –...

... ✓ Continuous torque up to 1.1 Nm ✓ Extremely compact design ✓ Torque motor as direct drive ✓ Integrated incremental encoder (optional sine/cosine, absolute) Available as a ready-to-connect complete system including servo amplifier with suitable fieldbus interface Options: Various bearings, holding brake, diverse cable exits and lengths...

... microSTRUCT™ C offers a maximal degree of freedom regarding the positioning of the substrates. Flexible, stable and repeatable machining results Two independent and free configurable working areas with various optical setups Open system concept for the integration of different laser sources High range of software functions (Masterscript) User friendly, flexible, upgradeable system...

...The laser marking and engraving systems of the EasyMark series are among the most compact laser marking systems on the market. Depending on the configuration of the system most metals and nonmetals can be processed. A manual component loading device and cameraassisted positioning are just some of the features of the system. Control is via Coherent's powerful Visual Laser Marker (VLM) marking software, which offers numerous interfaces, support functions, 3D engraving, and more. Weight:87 kg Dimensions:770 x 540 x 750 mm...

... the production of precision components. The modern EtherCAT® control architecture enables easy customized system integration. Additional accessories like an industrial control CNC, a joystick for manual movements, or a granite portal for 3D positioning (see picture above) are available for individual needs. The advantages at a glance: Position resolution: 0.0025 µm Repeatability: 0.2 µm Path accuracy: ±1µm Speed: 500 mm/s...

...Linear guides with permanent magnets are essential for drive technology and automation. The correct arrangement and attachment of the PMs make the linear guide very fast and precise. Magnetic tracks generate a uniform stable magnetic force and are used, for example, in the construction of highly efficient linear motors. With our magnetic tracks, we offer you high positioning accuracy as well as flexible assembly. According to customer specifications, we deliver complete components in the highest quality and precision in the desired shape and size.

...-axis:rpm 5.5 (10) Motor spindle , max. Speed:rpm 8000 Max. power (100% ED):kW/Nm 37/940 Total taper:SK 50 (HSK-A100) Motor spindle 1, max. Speed:rpm 15000 Max. power at 100% duty cycle:kW/Nm 70/230 Total taper:HSK-A100 Motor spindle 2, max. Speed:rpm 24000 Max. power at 100% duty cycle:kW/Nm 70/60 Total taper:HSK-A63 Positioning uncertainty (P):sec 0,005 / 6 Positioning scatter (Ps):sec 0,0028 / 4 Reversal error (U):sec 0,002 / 3 Weight:t 42 Space requirement for basic machine LxWxH:mm 9500x7800x4550...

... accurately placed in the corners of components. What is the advantage of a welding table with a T-slot system? A welding table with a T-slot is the perfect foundation for solving a wide range of clamping tasks using simple means (a T-nut), without the need for splash-sensitive H7 holes to accommodate special clamping elements. The functional area (running surface) of the slot is in an absolutely protected position. Only through the possibility of stepless movement within the welding table slots can one achieve success in housing and...

...Space-saving solution - High cycle times - High positioning accuracy - Gentle handling of products - Efficient product changeover The PP module line for up to 100 picks per minute is modular and flexible in design. It offers a precise, efficient, and economical solution for your products. The cells can be used both as a standalone solution and as a system solution. Products are fed into the...

...Technical data Dimensions (L/W/H) 120/80/155 cm Total weight 102 kg Equipment Mechanically bidirectional resistance system Autostabilization and positioning with saddle and integrated foot plate with positioning guide Easy-click seat height adjustment Options Balance pad 70 x 55 x 3 cm proxotrain software (in connection with Workoutpoint)...

... machine concept. The solid machine base, consisting of a natural hard stone granite portal with a decoupled Y-axis, guarantees high rigidity and long-term stability. The individual granite elements are manufactured with precision according to DIN 876 / Class 00. The groundbreaking linear motor technology and the incremental measurement method ensure the highest positioning accuracies with high dynamic feeds. The fastest control technologies (High-Speed-Cutting) ensure harmonious path movements with the highest precision and easy user guidance.

...Modular magnetic system with combined zero-point clamping function for precise repeat positioning of workpieces. This modular magnetic system with precision grid combines all the advantages of a zero-point clamping system with those of a magnetic clamping plate. It is suitable for the quick and easy precise repeat positioning of pre-processed parts for series production.

...A very stable data logger with an integrated navigation system to monitor critical transport. Shock-Inclination-Temperature-Humidity-Pressure-Nav Positioning-Recording...

...The linear axis is a linear drive and guiding system. In combination with stepper and servo motors, it is used for the precise positioning of mounted elements. The feed is generated by a ball screw drive, and the movement is guided by a special profile rail guide. Various configurations, accuracy classes, and sizes allow for different applications. In addition to ready-made products, we can also manufacture custom axes tailored to customer specifications. Show us your application, and we will find the right solution for you!

...Zinner has a comprehensive range of HSS and carbide boring tools. The extensive spectrum of tools in the Zinner boring system enables you to find the right boring tool for your special job. Features of the modular drill The positioning of the inserts is optimised for a balanced distribution of cutting forces. The generous chip space ensures efficient chip removal. The diameter range is from 16 mm...