building insulation Germany

...MAGE® Roof & Building Components GmbH offers a variety of certified products in systems that provide the right solution for different requirements. Moisture can occur in construction in liquid (rain) or gaseous (water vapor) form. Additionally, residual moisture may be present in building materials (e.g., in wood). Therefore, it is essential to protect the structure and insulation from various...

...From the very beginning, it is essential to choose the right sealing to protect the building from penetrating and rising moisture. For new constructions, an external sealing in the basement area with bitumen thick coating according to DIN 18195 is recommended. For existing buildings, a subsequent internal sealing with accompanying measures also brings the desired success. Facade surfaces can be...

...Due to its lightweight, durability, and stylish appearance, aluminum is often the material of choice for exterior elements of office buildings and other large construction projects. Our aluminum facade solutions for external wall insulation are a particularly important element for advancements in smart building. They help enhance the thermal insulation performance of this popular material. In...

... codes: DZ, DAD-dk, DI, WH, WTR","Technical Data":["Dimensions (net): 1,200mm x depending on thickness","Thermal conductivity: 0.035 W/m.","Building material class A1","available thicknesses from 40mm to 280mm"]}...

... 24 - 10 with combo base plate up to 250VA, these can be snap-mounted on mounting rails (EN 50022) or permanently installed soon available optionally with fail-safe protection up to 250VA, these are protected against overload and short circuit without additional fusing elements High-quality, tropical-grade vacuum impregnation in polyester resin Ambient temperature 45°C and insulation class 130°C(B...

...Raw felt board: Made from 100% recycled materials (used textiles and waste paper), no addition of chemical additives, 100% recyclable, very good impact sound insulation, protection of components Weight: 333 g/m²; 400 g/m²; 500 g/m²; 600 g/m² Delivery forms: - as sheet goods Standard sizes: 750x1000mm; 500x750mm; 297x420mm; 210x297mm Packaging units: loose on pallet (100kg; 250kg; 500kg), in...

...Building protection and roofing membranes made of EPDM and Butyl Armaflex and Tubolit isoPLAN Fiberglass and stone wool Styrofoam Foam qualities...

...Mixed-cell polyurethane panels ISOLMER® are used for vibration and shock insulation in the support and separation of buildings near railways, building sections, and machine foundations such as...

...Our SOLED LIFT facades offer mobile photovoltaic modules that can be used multifunctionally and align themselves independently with the sun. In addition to generating electricity, they also serve other functions within the building, such as shading or sound insulation.

... – voltage-resistant, thick-walled Application For insulating live plastic-insulated low-voltage cable ends 1 kV repair sleeves, tear-resistant Application For repairing cables Wall penetrations, heat-shrinkable Application Water- and gas-tight building entry for cables and pipes...

...The term asbestos stands for a group of very resistant and non-flammable minerals with a fibrous structure. Until the beginning of the 1990s they were mainly used for thermal insulation or fire protection. Asbestos is found in brake pads and clutches, in electrical appliances, in machines and technical equipment, in heating systems and, above all, as a building material in a great many buildings...

...) Building Materials Trade Our product range includes, for example: Bricks and slabs in various formats and qualities e.g. Fireclay bricks Lightweight and insulating bricks Calcium Silicate Insulation Boards...

... building materials through the application of synthetic resins clearly demonstrates the diverse areas of application. IPROSEAL®_PET is also available as a completely biodegradable product, for example, made from PLA or other compostable materials.

... - lacquered, veneered, or HPL coated - ◾ Solid chipboard and frame doors with a passage height of up to 3.00m for T-30 and up to 3.25m for RS doors ◾ Continuous hinges up to a height of 4.50m ◾ Frame wood widths starting from 80mm ◾ Leaf widths up to a dimension of 1.50m ◾ T-30 sliding doors with bypass function ◾ T-30 sliding doors with telescopic function For more information on the products mentioned above, as well as on sound insulation, radiation protection, bullet resistance, and climate classes, we would be happy to provide you with personal assistance upon request.

... Bau Munich (No. 1211). Advantages in application: - Cold protection in winter - Heat protection in summer - Noise protection - Vapor permeable - Energy saving & increase in building value - Renewable raw materials without harmful additives Examples of applications: - Ceiling construction - Interior wall construction - Exterior wall construction - Impact sound insulation - Solutions for packaging problems...

... insulation, heat reflection and insulation, anti-radiation, moisture resistance, heat retention, and energy saving in building applications (roof, wall, floor). This product can also be enhanced with a layer of PE fabric based on the original aluminum foil and polyethylene, significantly improving its tensile strength and tear resistance without altering the performance of the original product. The...

... damaged plaster - Salt treatment – solidifying the masonry through encapsulation - Applying renovation plaster for self-regulating moisture control of the masonry (residual moisture can escape, high porosity/water permeability to the outside, good thermal insulation properties)...

...Building renovation and maintenance describes the range of services in which we carry out all work that is directly or indirectly related to the thermal insulation of buildings and building components. Examples include: • Thermal protection in the attic • Suspended ceiling systems • Facade construction (ventilated facades) and • Moisture sealing...

...Small channels and pores evenly distributed in the mat fiber make up to 95% of the total content and provide perfect insulation. Furthermore, such mats are soft and flexible. These characteristics allow for the closest wrapping of a surface, ensuring that no heat loss occurs.

... well as for bonding insulation and drainage boards (expanded polystyrene, Styrodur, foam glass) on bituminous and mineral substrates in ground contact areas. BORNIT®-Fundamentflex 2K adheres well to all dry and mineral substrates, as well as to bituminous substrates of sufficient strength (e.g., old cold and hot coatings or thick coatings).

... penetration is desired or possible – for example, in front of floor slabs, in parapet or edge areas – without interrupting the facade system. With OKALUX HPI, the energy balance of a building envelope can be significantly improved. Additionally, slim constructions reduce construction and assembly costs and simplify building processes. Due to the installation in the cavity of the glass, there are also no maintenance and cleaning costs. OKALUX HPI is available in numerous design variants and can be combined with most product groups from OKALUX.

...Textile hall separation as sound, dirt, and thermal insulation...

... vertically and horizontally due to its end joints. These panels can also be used for basic insulation of existing buildings. Building material classification according to EN 13501-1 A1 or A2 for a non-combustible material B, C, D, E for a combustible material, where B is lowest combustibility. A1 is the highest class and is not combined with any additional class. The other classes are always...

... insulation profiles and glazing of the highest quality, our winter gardens meet the standards of the Energy Saving Ordinance (EnEV). We offer: • Numerous floor plan shapes: from the simple shed roof to the polygonal model in pavilion style • Individuality • Design freedom – including a wide variety of colors • Compatibility with functional elements from the proven Schüco system • A rich selection of accessories: ventilation, sun protection, control modules, etc. • Tested quality and system reliability...

...We offer ready-made sandwich panels that have an insulating material between two steel sheets. With these, you can build much faster without compromising on strength. Sandwich panels are a modern building material that combines roofing or wall cladding with insulation, providing the advantage of durability and insulation in one. Similar to a snack for in-between meals, sandwich panels are...

...The pressure relief flaps have been specially designed for explosion-hazardous areas. They serve to protect people and buildings. In the event of an explosion, the flaps are opened by special industrial magnets. They allow pressure in the building to escape in a controlled manner and then close automatically. The flaps are custom-made, and the release pressure is set at the factory. Standardly made of aluminum and equipped with 40 mm thick insulation, we can also offer the flaps in a thermally separated version made of plastic (down to -40 °C).

...Sandler leverages expertise from diverse processing and manufacturing technologies, as well as experience from various market segments, in the production of new nonwoven solutions. Materials made from pure polyester are also fully recyclable even after long periods of use. Special product variants for insulation in construction carry the necessary building authority approval.

...Prefabricated Balconies - Surface Quality: one side always formwork-smooth – the other side optionally hand-troweled, surface-troweled, wing-troweled, sandblasted, or textured. Prefabricated Balconies • individual, project-specific production • formwork-smooth surface with slope and floor drainage • with and without edge upstands • thermal separation from the building by installing insulation...

... needs, with easy transport options and quick assembly. We also offer customized solutions to meet your specific requirements. We provide a wide range of services, including implementation of your planning, manufacturing, delivery, and assembly. Upon request, we also offer building application planning, execution planning, building applications, engineering services, and verifiable statics. Contact us today for personalized advice and to find your perfect storage solution.

...Expanded Polystyrene EPS — available to order at the Hannover warehouse — block size 200 x 125 x 100 cm — high density (approx. 30kg/m3) — finely structured — cut manually with insulation knife, insulation saw, or utility knife — cut with CNC hot wire cutting machine — advertising technology, sign making, architecture, model building, sculptures, art, gardening, company logos — B1 certified 1 m3: approx. 30 kg...