load testing Germany

... trapezoidal forms. Mobility requires reliable cooling and heating systems. These help both people and machines – whether electric or combustion engines – adapt to varying environmental conditions on land, water, and in the air. Climate systems and all their components must endure high load cycles over time. Instead of testing durability in real operation, manufacturers can now flexibly and economically...

...CUSTOMIZED TO CUSTOMER REQUIREMENTS Clamping tables and load platforms Customer-specific clamping devices...

...The inspekt solo for test forces up to 2.5 kN is ideally suited for standard-compliant material and component testing in the low-load range. It is an exceptionally lightweight testing machine for determining the material properties of wire, foams, elastomers, plastics, paper, cardboard, textiles, food, and components. Simple standard tests can be conducted as user-friendly as custom tests. The...

...{"Load Capacities":{"Field Loads":"up to 1600 kg","Point Load":"up to 190 kg evenly distributed"},"Designs":{"Height Adjustment":"without screws at intervals of 25 mm.","Defined Ground Resistance":"10^4 to 10^9 on the surface (DIN EN 61340-5-1:2008).","Expandable":"Can be expanded at any time - even retroactively. Quick plug-in assembly.","Single-Sided Use":"Design with diagonal braces.","Testing...

...for DIN-compliant quality testing of door fittings (locking systems) for practical simulation according to DIN EN 1191 Test specimen Locking systems with one main lock and up to four auxiliary locks can be controlled separately Profile dimensions: 22-97 mm Distance cylinder - handle: 85/88/92/94 mm Mechanical data adjustable load on the locking points: < 150 N Drive torque actuator: 40 Nm Measurement values: Actuator torque Dimensions of the test device: 736 x 2644 x 890 mm (W x H x D) Connection media 230 VAC, 0.8 kW Dry compressed air, 5 bar...

...Raw material / packaging incoming inspection, in-process controls, final inspections, long-term stability tests according to GMP guidelines Microbiological laboratory and tests Load tests, preservation settings...

...Series production of our developed plastic etching basket. Material used: gray PP Polystone. Used in the solar industry for component etching with HF (hydrofluoric acid). Load capacity up to 50 kg. Stackable.

...High-precision soil testing devices, dynamic plate load test with the lightweight falling weight device "Made in Germany"...

...The testing machine of the FWP 5 series is suitable for tensile, compressive, and bending tests, as well as for cyclic load and fatigue tests. The testing machines meet the high accuracy requirements for force measurement and length measurement technology according to DIN EN ISO 7500 and DIN EN ISO 9513. The modular design of the testing machines ensures great flexibility in meeting customer...

...Article number: AS_3377 The DESABAG Big Bag 100x100x200cm with inlet/outlet for easy and precise emptying of loose bulk materials SF 5:1 Material: UV-stabilized polypropylene fabric uncoated Mini Big Bag / garden waste bag 200 l volume without print top open, bottom closed 2 hand loops on top and 2 discharge loops on the bottom approx. 10 cm 1 helper loop in the middle, approx. 10 cm Size: 55 x 85 cm SWL: without load testing Fabric thickness 170 g/m² Empty weight: 0.48 kg...

...Special testing facilities allow for load tests on these components during ongoing production operations, which reduce vehicle weight and contribute to fuel savings.

... turned. The ergonomic octagonal shape of the base allows for easy installation using a standard open-end wrench. 100% crack-tested. Complies with the testing principles of BG GS-0A-15-04. Like the TITAN anchor point, the X-TREME anchor point has 100% load capacity in all pulling directions. The X-TREME anchor point is not suitable for continuous rotational movement under load! Item number: TH-F34306 Thread: M10 Vertical load capacity: 0.9 tons Thread length mm: 15...

... moments. The clamping collet principle securely holds the sample in place. It ensures that the clamping force does not loosen due to vibrations, thereby preventing slip. The loaded areas of the samples are not touched by the clamping. Using the intuitively designed touch display, all necessary test settings are made and read. In the menu, limit values for the bending moment and load cycles can be set, among other things. The rotational speed can be continuously adjusted both before the test starts and during the test, and is actively controlled.

...) capacitors distinguish themselves by high AC-voltage load capacity and suitability for high rms and surge currents. Our MKP(D) are available as single and three-phase capacitors and well-suited for all conventional applications in power factor correction. They have a self-healing dielectric and are provided with an irreversible overpressure disconnector (break-action mechanism, " BAM "). Connection is made through convenient standard 6.3mm tab connectors. Technical layout, testing and application accord to IEC60831, UL810 and CSA 22.2.

...The containment tray allows for ideal storage of Deuto-Clear® Sulfo in the 1,000-liter IBC. Features • Material: PE - Absolute corrosion protection • High resistance: maximum load 2 tons • Guaranteed leak testing - no connections • Integrated fork pockets for safe transport • 5-year warranty • Manufactured according to ISO 9001: 2000 FM 57348 standard • DIBt approval: Z-40.22-472...

...Your temperature testing chamber for load and aging tests Temperature testing chambers - from tabletop models starting at 25 liters to floor-standing units up to 3500 liters or even walk-in? Temperature range: -40°C to +180°C // -70°C to +180°C Temperature change rate: Cooling: 2 to 6 K/min Heating: 2 to 6 K/min Higher values desired? See stress screening temperature chambers Didn’t find your requirement? We would be happy to advise you personally and equip your temperature testing chamber according to your specifications.

... suitable for passive isolation of measuring and testing machines, individual building components, up to entire buildings (earthquake protection). Specifications Load capacity FCd per spring package: 0.07 kN to 20.11 kN Natural frequency ne vertical: 2.6 Hz to 4.2 Hz Isolation efficiency up to 90% Amplitude damping made of plastic or viscous mass Optional height leveling With and without preloading Additional Features The ISOFED steel compression spring program is characterized by its versatile modular system.

... optical signals - ideal operating mode for efficient and error-free testing of series parts * Internal data storage for up to 999 values * Continuous analog output: Linear voltage signal depending on the load (0 - 2 V) * Delivered in a robust carrying case * Selectable units: N, kN, kgf, ozf, lbf...

... structural stability! Determining the total service life is particularly interesting when the wind farm configuration changes, thereby affecting the load on the existing facility. We will inform you to what extent the service life of a facility is reduced due to additional turbulence from pre-existing installations. Furthermore, determining the total service life also plays a significant role when the revenue or repayment phase needs to be extended due to individual circumstances.

... just 15 minutes - Only a low viral load is necessary for detection - Infected individuals can be identified even before they develop symptoms Complements the Influenza A/B and SARS-CoV-2 antibody tests excellently PPN international 111687914190 PZN national 16879141...

...Your task ... our solution - Load and failure testing with measurement data logging - Defined energy input in test specimens - Subjective and stochastic durability tests - Lifetime testing - Real-time quality monitoring systems - Computer-based evaluation systems for quality control...

... Additionally, we also offer various services, such as a repair and testing service, rental of equipment, an assembly service, various training sessions or seminars. In our 4 production halls, which are characterized by high technical and innovative standards, we manufacture our high-quality products. To guarantee our customers quick processing and delivery times, we store our products in 3 warehouses...

... professional experience in the development of electron beam technologies by Mr. Götz Sobisch on one hand, and the manufacturing of load-bearing components by Mr. Joachim Schenke on the other. This led to the idea of investing in suitable electron beam systems and technologies that are flexible enough to cater to single, small, and medium series. Since its inception, the medium-sized company has...

... of defective bearing seats on shafts and in bearing shields - Balancing of squirrel cage rotors, wound armatures, pumps, and fan wheels - Drying of windings, reimpregnation Load testing of motors We are also happy to assist you with new drives. Whether from our stock or in the express case of a comprehensive selection of various brands. Our partners Learn more about our extensive and high-quality range of services: - Repair of electric motors - Spare parts - Power tools - Power electronics - Winding technology - Control engineering...

...EN60034 and IEC60034, VDE, DIN, and ISO. MENZEL also operates a state-of-the-art load testing field at the Berlin site with 2300 kVA. The equipment includes, among others, a 6 kV inverter, rotating converters for voltages from 3 to 13.8 kV, and load resistors for testing generators.

... requirements. Services for testing and maintenance of mechanically, electrically, and hydraulically operated hoists from leading manufacturers. - Authorized specialist company for testing and maintenance of mechanically, electrically, and hydraulically operated hoists from leading manufacturers (ABUS, Balkancar, DEMAG, Enerpac, Greifzug, HADEF, KITO, Kone, Liftket, Pfaff, R.Stahl, SWF, Yale...

... applications - Custom Software Development - Full software development lifecycle - Dedicated project team - QA Services - Performance evaluation, unit & load testing. Compliance with international standards - Technical Support - User & support documentation. Post-release training & support - Legal Advice We continually review our development strategies and our choice of development tools in order to build in reliability and avoid obsolescence.

WINtec process is, among other things, a manufacturer of mobile and stationary wheel load scales and wheel force measuring devices, corner load scales and corner force measuring devices, as well as load testing stands for bogies.

Development and manufacturing of testing equipment for construction: plate load testers and planographs.