electrical systems Germany

... as custom special solutions. 1. Product Portfolio • Cable support systems • Wire mesh trays • Cable troughs • Cable guides • Cable channels 2. Wire Types • Bare wire • Pre-galvanized wire • Galvanically galvanized wire • Galfan wire • Stainless steel wire 3. Wire Diameter • e.g., standard sizes from 3.0-5.0 mm 4. Wire Mesh Dimensions • e.g., external dimensions from 500x100 mm...

...A qualified Electrical Engineering Specialist has a profound education as well as specialized knowledge and qualifications in the field of electrical engineering. He ensures that electrical systems and equipment are properly installed, maintained, and operated. He is also the point of contact for all safety-relevant standards and regulations in electrotechnical matters. ErTeMes will be happy to...

...DC Filter for Rail, Industry, Battery Storage, and Photovoltaic Applications The compact DC EMC filters 2F1000-xxx.260 from Fuss-EMV ensure compliance with the mandatory EMC standard EN 61000 in Europe regarding the disturbances radiated from the DC side. The inverters for feeding in regeneratively generated electrical energy have a high disturbance potential. The increasingly efficient energy conversion through the fast switching of modern power semiconductors is introducing high-frequency energy into the systems to a growing extent.

... Connection external thread: R 1 1/2" Dimensions (L x Ø in mm): 928 x 100 Flange distance: 710 mm Weight: 8.0 kg Lamp service life: 10,000 h Dose: 400 J/m² Max operating pressure: 10 bar Enclosure protection class: IP 65 electrical connection: 110-240 V 50/60 Hz Power: 90 W Fuse: 10 A...

...Heavy industrial contactors are essential components in industrial systems that enable reliable switching and control of electrical loads. At AIS Hensch Automation-Industry-Solution we offer a wide range of high quality heavy industrial contactors designed for demanding applications in various industries. Robust construction for use in demanding environments: Our heavy industrial contactors are...

... requirements and stresses, the power supply systems and drag chains can be delivered in various designs with different pole numbers. Compact drag chain DCL-Pro: High rigidity of the profile rails with low weight, Up to 200 A in continuous operation Single conductor DEL: Lightweight, compact design, Space-saving power supply, High electrical safety...

...Electrical pocess heaters from 0,5 kW up to 1000 kW including pressure vessel, according ASME, PED or TR-CU. Gas heaters for natural gas, seal gas, fuel gas, industrial gas applications, process gas. Liquid heaters for oil, water and any process liquids. ATEX, IECEx, TR-CU certificates. Operating temperature up to 1000°C Operating pressure up to 500 bar...

...Our expanded product range also includes the following systems and system components: - Activated carbon filter systems - Centrifugal separators as cyclones or multi-cyclones - Quenching or conditioning coolers - Dust discharge systems with silos, chain conveyors, screw conveyors, etc. - Extraction systems - Stacking containers - Lime and dust silos - Support baskets and filter hoses - Spare parts for fabric and electrofilters of all brands...

...Various solutions are available for evaluating the UV signal; from simple, relatively display-oriented systems to complex devices with absolute measurement, menu navigation, and additional functions. The UV monitor DUV11.8 offers a cost-effective way to measure UV irradiance. The circuit board assembly is designed for installation behind a front panel cutout.

...Whether in industry, construction, or research: different companies and institutions have very different requirements for steel construction. As specialists, we develop, manufacture, and assemble exactly the steel structure you need. Our range includes everything from complex steel construction platforms as substructures for your machines and systems, to crane runway systems, and even pipe bridges. In addition to the development and construction of new facilities, our areas of responsibility also include expansions of existing facilities, renovations, and maintenance of steel structures.

... mechanical and electrical insulating properties in a single component. This enables more efficient systems that comply with industry-specific safety standards. Our high-performance plastics, classified as V-0 according to the fire protection standard UL94, offer you tailored solutions that are aligned with your specific needs. Our particularly robust plastic profiles contain neither red phosphorus nor halogens and feature excellent surface quality.

...Type USI Category Transformers Design Safety transformer (single-phase) Application For supplying electrical circuits or devices that are to be operated with protective low voltage (SELV, max. 50 V) (e.g., devices for materials testing technology, film welding machines, certain systems in the chemical industry and mining, etc.). Execution open design (IP 00, installation max. up to IP 23) with...

...The PPM Nitrogen Charger (PPM NCU/HA/35/400) is designed for filling large storage systems (bladder, membrane, and piston accumulators). It consists of a hydraulic drive unit, a compressor, an electrical control system, and the necessary hoses. The components are integrated into a compact, portable housing. The device operates automatically until the preset pre-fill pressure is reached. The PPM...

...We are also here to assist you with troubleshooting machines. Features: • On-site services / troubleshooting of electrical systems • Control cabinet construction • Creation and programming of small controllers...

...Compact filter valve controls, with and without built-in differential pressure regulators, for the electrical control of solenoid valves in industrial dust extraction technology. Suitable for both new systems and for increasing the efficiency of existing fabric filter systems.

...Condition Monitoring is the term for the condition monitoring of systems.

... already implemented in the field of electrical engineering (excerpt): - Instrument assemblies - Stepper and servo motors - Quick-release coupling systems - Gear balance shafts - (Testing run-out accuracy and tooth flank play) Assembly systems: - Plug connectors (vehicle electronics) - Industrial sockets and switches - Sockets / light switches - Electric heating control valves - Electric shavers - Electric toothbrushes Test and inspection lines for: - High-performance electrical switching components (up to 6 kV) - Electric door locking systems (vehicle)...

... is applied, the DMD 331 measures the difference in pressure between the positive and negative sides and converts this into a proportional electrical signal. Features: — Differential pressure 0 ... 20 mbar to 0 ... 16 bar — Accuracy: 0.5 % FSO — 2 piezoresistive pressure sensors — Media separation through stainless steel membrane made of 1.4435 — Differential pressure wet/wet — Permissible static pressure - unilaterally - up to 30 times the differential pressure range — Compact design — Mechanically robust and reliable under dynamic pressure loads as well as shock and vibration exposure...

...Spiral and flat springs are used, for example, in the aerospace industry, the sanitary industry (including toilet flush systems, washing machines, tumble dryers, etc.), the sports equipment industry, the conveyor technology industry, as well as the electrical and fire protection industries. These springs are made from cold-rolled spring band steel, which is typically wound into a coil. When the spring is subjected to tension through stretching, it counteracts the applied force.

... of plastic technology and wherever silicone is not suitable. Properties: Can be painted over and sanded after curing, Odourless curing, Resistant to weathering and UV, Excellent aging resistance, Resistant to fresh water and saltwater, Stable, pasty and Silicone-free. A better adhesion is achieved by using suitable WEICON adhesion agents. With suitable paint coating systems (except alkyd resin paints). Available in white, grey and black. Temperature resistance::-40 °C - +90 °C, short. (max. 2 hours.) up to +120 °C...

...The term asbestos stands for a group of very resistant and non-flammable minerals with a fibrous structure. Until the beginning of the 1990s they were mainly used for thermal insulation or fire protection. Asbestos is found in brake pads and clutches, in electrical appliances, in machines and technical equipment, in heating systems and, above all, as a building material in a great many buildings...

... plug 16 A, 5-pole Parallel operation of both pumps to cope with increased sewage volume (e.g. during heavy rain) LCD plain text display Thermal and electrical monitoring of the motors Manual – 0 – Automatic functions Pump switch-off through switch-off point with run-on time Acknowledgement button Electronic monitoring of the motor current Forced switch-on, switchover and alternation of pumps Variable graduated start-up (switch-on delay) Internal acoustic alarm Collective fault message potential-free and potential-bound Backwater alarm potential-free Housing:Polycarbonate...

.../hour Pallet Dimensions: max. 1,000 x 1,200 mm Max. Wrapping Height: 2,500 mm Min. Wrapping Height: 500 mm Electrical Connection: 400 V, 50 Hz, 3 kW (3PH+N+G; IP54) Compressed Air: 6 bar (100 Nl/min) Machine Weight: approx. 650 kg Film Type: Machine stretch films Roll Diameter: max. 250 mm Roll Height: 500 mm Roll Weight: ~ 20 kg...

... charging state. We offer you: Stationary charging systems designed in accordance with conventional and cutting-edge technology for the safe supply of energy to the batteries Maintenance case Safety equipment And much more...

... unauthorized access We offer the right product for every application: - Temperature resistance from -40 to 550 °C - Customized flow properties: liquid to pasty - Final hardness: soft to hard-elastic - Transparent or colored - For manual and machine casting, processing time: extremely short (10 sec.) to 3 hrs. (depending on the product) - Processing form: warm or cold curing - 1- or 2-component systems available - 1 kg to 30 t per delivery...

...Cable trench construction is a core competency of BFL. This primarily involves: • seamless cable ducts - in airport construction, at industrial sites, among other infrastructure measures, in areas with high groundwater levels, and under heavy loads • junction boxes and installation shafts according to the standards of TELEKOM AG or DB AG • standard cable ducts and slab shafts - for complex installation situations or existing cable systems • cable channels in various designs • cable covers • cable markers...

...Two accumulation places für high speed Low maintenance Low wear Very quiet operation Also without accumulation areas possible Upstream and downstream interlocks Settings by intuitive operating terminal In conveying direction left or either right Machine movable Power cable, length 3m OPTIONAL: One pop-out roller on entry side PLC control Table height steplessly adjustable Many specific options available, easily configurable Fully electrical system, no pneumatic connection required...

... Tracking and recording of staff productivity Weekly scheduling function Emergency assessment applications Safety applications in extreme situations Maintenance and fault warning systems Step-by-step process applications Clear visual graphics Applications that enable control of mobile devices. Password control function Easy assembly of electrical components for simple maintenance and troubleshooting Multilingual function...

...Motor starter systems for motor-close and decentralized use in harsh industrial environments Supply voltage at AC 50 Hz: 400 V Rated operating current of the motor: 4.0 A Rated power of the motor (min. - max.): 0.09 - 1.5 kW Number of inputs/motor outputs: 3/1 Switching frequency (max.): Application-dependent Protection class: IP65 Mounting direction: Horizontal and vertical Ambient temperature: -20 to +40° C AS-Interface specification: V3.0 Motor protection through thermal motor model: Yes Approvals: CE Feature: Start-up time podis®/gesis® MSS: 0.1 - 10 s...

...We analyze, advise, and design compact electrical, electronic, and pneumatic control solutions for you. These include control cabinet construction and the implementation of your individual ideas. Whether it's press control, controls for handling wafers in clean rooms, special controls for gas shielded welding, axis control, or process control. A modern touchscreen interface is also possible. As a member of the Mitsubishi Electric Automation Network, you receive the latest technology from us, along with a product that is fully designed, assembled, tested, and documented.