temperature sensors Germany

... increased measurement reliability, as the common measurement point allows for direct comparison of the local display with the electric temperature sensor, and vice versa. • Installation costs for temperature measuring instruments are reduced, as only one measurement point needs to be set up for both electric temperature sensors and local temperature measurement. Design: 90° angled version, angled connector Display range: -30...50 °C, 0...60 °C, 0...100 °C, 0...120 °C, 0...160 °C, 0...200 °C...

... measurements on solids. The special designs offered meet these requirements. They differ in terms of construction type, the material of the protective sheath, and the maximum operating temperature. For measurements in solids, as well as in liquid and gaseous media, resistance thermometers with a number of proven designs are available.

...The PT sensors are available in various versions: PT100, PT500, PT1000. They have small dimensions, higher accuracy, and fast response time.

...The DATAPAQ MultiPaq21 data logger has up to eight channels (Type T or K), allowing you to collect product and environmental temperatures from up to eight locations at once. Using flexible thermocouple cables, the temperature sensors can be positioned precisely within the product, on the surface or in the air. They can record temperatures without the data logger or its mass influencing the...

...Valilog, the data logger system from Valitech, is tailored to meet the requirements for validations and process monitoring under high temperatures and pressures. Our system, consisting of pressure loggers, temperature loggers (with long and short sensors), and dual temperature loggers, along with the corresponding software, is specifically designed for use in the validation of processing...

...The Thermalert TX infrared temperature sensors are available with remote addressability, easily installed in multidrop configurations. TX Series Smart Sensors communicate over a simple loop-powered 2-wire cable using the HART (Highway Addressable Remote Transducer) protocol. This signal combines industry-standard 4-20 mA output with simultaneous digital communications. They include Raytek...

...Calibratable liquid glass thermometers for measuring the current ambient temperature. These thermometers are also used as psychrometer thermometers according to August.

... PC cards or PLCs. The LKM 458 has a typical accuracy of +/- 0.5°C and 3% r.H. The sensor is delivered pre-calibrated. Minor adjustments can be made on-site using two controllers. It is important to ensure the correct positioning of the sensor. The protection rating is IP64. The measurement range is -20...80°C for temperature and 0..100% for relative humidity. The sensor can also be supplied for 0...50°C.

... _______________________________________________________________________________________________________________________________ Details about the Temperature Sensor The temperature sensor is connected to the analog inputs of the GSM alarm detectors or IP sockets (timers with network connection). With the IP socket, the temperature can be displayed in the browser. With the GSM alarm detector, the temperature can be queried via SMS. When a threshold is set, an SMS alert can be initiated. Item number: 700802201 Weight: 6 g Length: 600 mm...

...Additional module "TI8004" for DIN rail • external connection for up to 12 external temperature sensors possible • temperature sensors "TF8000" available individually • supports BR7000-1 and BR7000 • display and management of temperatures in the controller • operating modes: system monitoring, group monitoring, or stage monitoring possible (assignment of sensors to outputs) • ready-to-connect application solution • power supply is provided via the connected controller...

... enable precise measurements and thus provide a reliable basis for the control and optimization of industrial processes. From pressure and temperature sensors to flow meters, we offer a variety of solutions that enable accurate recording of process parameters. Versatility for various applications: Our range of industrial metrology includes a wide range of products suitable for various applications, be it chemical, petrochemical, food, power generation or other industries.

... 85 °C, e.g. for biotechnology or quality assurance. Our sales team will be happy to discuss further scale prices and possible individual customizations with you. Filter 1:H1/SO2 Filter 2:D5/5060 Temperature min. °C:-20 Temperature max. °C:85 Aperture in mm:1,5 Channels:2 Thermistor:Ni1000 Filling gas:Krypton Package:TO39...

...Custom solutions tailored to measurement tasks and environmental conditions, temperature sensors, and evaluation electronics...

...Cell wheel feeders are versatile dosing devices used in various sectors such as plastics, rubber, animal feed, chemicals, food, and for bulk materials of all kinds. We supply the following versions: - Feeders in steel welded construction - Made of standard structural steel - Made of stainless steel - Gas-tight, pressure-resistant up to 6 bar - Temperature-resistant up to 600 °C - Optional with speed monitoring, temperature sensors, internal pressure measurement,...

... impacts. The measurement output is digital via an I²C interface, with the address being customer-specific. Thanks to the bus capability of the interface, combining multiple sensors within a system is easily achievable. Measurement range:: 0...80% rH, 80 - 100% rH (short-term); -40..+100°C Accuracy:: +/- 1.8% rH in the range of 10..80% rH; +/- 0.2% rH in the range of 0..10% rH; +/- 0.2° C in the range of 0..60°C Operating pressure:: max. 150 bar...

...Approval according to MID Directive for metrological traffic, energy measurements in water Optical interface for data reading according to EN 1434 Instantaneous values for energy and volumetric flow Flexible input and output module options Long battery life (up to 16 years) Cooling quantity approval (according to PTB K7.2 standard) Suitable for 2- and 4-wire temperature sensors Delivery with heat/cold approved PT500 sensor pair (including associated immersion sleeves) Optional 2 analog outputs (4 … 20mA, passive)...

... effective for a maximum operating pressure of 1.2 bar abs. and a maximum operating temperature of 60 °C. Equipped with one or two temperature sensors (PT 100), it also provides protection against a short-term fire from one or both sides. The installation of the detonation tube safety device is permitted in both horizontally and vertically oriented pipelines. When operating with only one temperature sensor, it must be installed on the side of the valve from which a fire is expected.

... prevail in these areas demand the highest levels of operational safety and reliability. This motor is particularly low in noise and is equipped with built-in temperature sensors for monitoring the bearings. An additional terminal box for PT 100, anti-condensation heaters, etc. is also provided Performance range 160 - 800 kW Ex-proof II 2 G Ex de IIC T4...

...For continuous level and temperature measurement of water and wastewater, BD/SENSORS has developed the LMK 307T. The advantage: Simultaneous measurement of level and temperature with separate, independent signal amplification. Maintenance and wiring efforts are significantly reduced. In addition to the classic signal processing of the level, there is an additional signal circuit independent of...

...Level Plus level transmitters leverage the inherent advantages of magnetostrictive technology to measure the level, interface height, and temperature of a tank from a single process opening. Level Plus level transmitters utilize the inherent benefits of magnetostrictive technology to measure the level, interface height, and temperature of a tank from one process opening. The precise measurement of multiple process variables from a single opening reduces the installed costs for adding feedback to a storage or process vessel.

... SD cards with up to 128GB storage capacity (over 19h data recording) •,Compact dimensions (130x75x30mm) and light weight (300g) •,Integrated 4.3" touchscreen for easy configuration and display of measurement results •,USB port •,Integrated sensors (3-axis vibration transducer, 3-axis gyroscope, temperature sensor) •,Integrated Conditioning for IEPE Sensors (available from 2024)...

... Motor: BLDC motor with integrated motion controller, 24 V DC, 2 A, 53 W, analog hall sensors (3000 pulses / Velocity range: 1 - 4,000 rpm Cable length: 10m Weight: approx. 3,200 g Remarks: * with optional fluidic seal module, double shell heating module heat insulation module; Customized...

... JEVAmet® VCU-BM VACOM – MVC-3 (variants B0 and BM) Measurement accuracy: ± 10% of the displayed value in the pressure range of 1E-2 mbar to 1E-8 mbar Reproducibility: ± 5% of the displayed value gas type dependent 2 interchangeable yttrium oxide-coated iridium filaments Outgassing temperature: max. 250°C Sensor in stainless steel tube 1.4301...

... options · RoHS compliant User-specific designs · Discs made of stainless steel · Cylindrical measuring bodies with metal membrane · Pressure sensors are supplied according to user specifications, in accordance with the measuring body requirements.

... times. Product: Organic Sencha Green Tea in compostable capsules for Nespresso®*-system Quality: Premium Quality – for Daily UsePurpose:Suitable for Nespresso®*-compatible machines Sensors: Yellowish green color, typical green tea taste Art.No.: A12-10057 – 10x Capsules Box MatchaMagic Label-MOQ: 20 Boxes Private- & White-Label MOQ: 10.000 Boxes Certificates: JAS-Organic, EG-ÖKO Analyses: Pesticide, Radioactivity, Heavy Metals and Microbiology...

... Eliminate hot and dark spots–POREX® Virtek™ PTFE reflects light in all directions, causing the light to be spread evenly across a surface and eliminate hot spots. Increase efficiency – With more than 97% average reflectance over the entire light spectrum, our reflective materials capture wasted light and deliver directly to the lighting task. High temperature tolerance of up to 260°C...

... production. The microVEGA™ xMR uses on-the-fly spot and variable laser energy to provide selective heating of the pinning layer in each sensor in order to “imprint” the intended magnetic orientation. Magnetic field strength and orientation is adjustable by recipe, while high temperature gradients ensure low thermal impact. This allows sensors to be processed directly next to readout electronics as well as closer together, and enables the production of smaller sensors—freeing up space for processing more devices per wafer. ...

... vibrations or harsh environmental conditions. Optoelectronic encoders feature code discs whose tracks are digitally scanned. They are high-resolution, low-temperature coefficient, and available in single or multiturn versions with analog or digital signal output. Magnetic angle sensors are extremely robust, completely hermetically sealed measurement systems in a two-chamber design with protection class IP 68. For example, in the version without shaft passage, they capture the angular position of a permanent magnet attached to the measurement object.

...Explosion-Proof Motors - Explosion-Proof Lights - Explosion-Proof Sensors (Ignition Protection Type i, intrinsically safe) - Explosion-Proof Junction Boxes (Ignition Protection Type e, increased safety) TECHNOLOGY: - To maintain a maximum permissible temperature, the soundproof cabin is ventilated with air. This is achieved through forced ventilation with redundant fans. - Flow and...

... Freely programmable test sequence to set the operating point at which the test specimens are to be tested Central oil circuit connects 1-5 test chambers Changeover devices for different types of oil pumps Optional: Drive system for pumps without their own motor Calibration equipment for all built-in sensors Made in: Germany...