glass installation Germany

... OVERGLASS types, there are two mounting options to choose from: When mounted under the glass, the entire awning remains dry, clean, and well protected from wind and weather. For the over-glass installation, the ANCONA is equipped with a protective roof cover. We offer the ANCONA awning in widths up to 600 cm. The projection depth of up to 450 cm can be adjusted precisely to the rafter length of the glass roof or conservatory.

...Paneo impresses with its slim sight width of 35 mm. The glass partition Paneo is suitable for stud and masonry walls with glass thicknesses of 8, 10, and 12 mm. Installation should ideally take place after the completion of walls and floors.

... side. Installation Time 10 m2 / man-hour (experienced installation personnel) Components Glass-glass solar modules with SSG bonded backrails and mechanical support Horizontal rail, sliding safety Vertical construction as well as brackets/spacer screws are often provided by the construction site. If necessary, these will be part of the package.

...Material: Thermoplastic PA (Polyamide), glass bead reinforced or PP (Polypropylene), glass fiber reinforced. Execution: Black-gray. Note: The mounting hole is designed so that the handle grips can be attached from the operating side using a cylinder screw or a hex nut. Installation: From the operating side or the back. On request: Other handle colors.

... specifically provided Ex-proof power supply can be used with 2 sensing heads. Measured temperature range:-40 – 1.800°C (dependent on model) Optical resolution:Up to 100:1 Ambient temperatures:-10°C – 180°C (dependent on model) Environmental rating:IP65 Spectral response (Raytek MI3 LTS, LTH, LTF):8 to 14 μm Spectral response (Raytek MI3 G5 – glass):5 μm Spectral response (Raytek MI3 1M, 2M):1 μm, 1.6...

... draining pumps in pump sumps is taken into consideration in the shaft dimensions. One-piece compound structure made of glass fibre reinforced plastic (GRP) from a shaft pipe diameter of 1000 mm to 2900 mm, cover and base plate made of reinforced concrete. Absolute water-tightness provides for excellent suitability for further purposes e.g. as an inspection, cleaning or valve shaft. Meets all the requirements of the ATV “Sewage” regulations, which means the pre-fabricated STRATE AWALIFTSCHACHT complies in production and scope of supply completely Housing:fibreglass plastic (GRP)...

... targets, either by push-button at the rear of the instrument or remotely via an RS232/RS485 PC connection, where adjustments can be seen in real-time through video. Sensors with variable focus option can be configured according to specific application requirements, reducing the installation time and chance for incorrect installation. All sensors feature identical installation hardware and include Raytek DataTemp Multidrop software to enable easy and consistent installation, configuration and data capture across the full breadth of an applications.

...Regardless of the type of media you use (alumina, glass beads, silicon carbide, plastic beads, or organic materials, etc.), blast booths designed for continuous blasting will undoubtedly increase your production and reduce your costs by replacing manual, labor-intensive processes such as grinding, chemical cleaning, acid etching, wire brushing, and deburring. Here at Proton, we offer a wide range...

...3D lettering or letters made from Styrodur and acrylic glass. 3D lettering or individual letters made from Styrodur or Styrofoam with a premium acrylic glass front in any color. Printed acrylic glass is also available. Suitable for both indoor and outdoor use. Easy installation with templates and adhesive. Both can be provided. Max. letter height: 2000 mm Max. letter width: 1200 mm Max. letter depth: 700 mm...

...Elegant design and scratch-resistant surface • Simple and clean wall installation with a drill - reliable and secure fixation for a long time • Can be used on many surfaces: suitable for tiles, metal, natural stone, marble, glass, wood. • A great opportunity to purchase more bathroom accessories from this collection and create perfect furnishing solutions in a single style.

...Spacer discs for installation between standard flanges (intermediate flange) for DIN EN 1092-1 / ANSI B 16.5 made of steel or stainless steel according to DIN 2626 for pressure tests, pressure samples to isolate a media flow from pipelines. Blind disc (full disc) type BS for isolating a media flow from pipelines, containers, or industrial plants during maintenance work. Perforated disc (ring...

...We offer various films for installation in the automotive and construction sectors. There are films for glazing that serve sun protection, safety, and decorative purposes.

...Commercial Meiko hood dishwasher available in various equipment and installation options Germany: Offenburg Corner installation possible: Water treatment Perfect cleaning: Etol cleaning chemicals...

...▪ Highly selective coated aluminum-copper absorber ▪ With patented heat conduction technology WLT ® ▪ Powder-coated aluminum frame, mineral wool insulation, aluminum back panel ▪ Low-iron solar safety clear glass ▪ Collector connection on the side, for compression fitting, metal sealing Application areas: solar drinking water preparation and heating support Installation: FK 253 HA-4A 10 mounted in series and hydraulically flowed through Registration number FK 253 HA-4A: 011-7S2432 F...

...Bus shelter made of aluminum extruded profiles, arched roof, vertical glazing with ESG safety glass, roof covering in polycarbonate or aluminum, drainage integrated and concealed in the roof profile, lighting integrated and concealed in the roof edge profile, standard or LED, benches, waste bins, information or advertising showcases as desired, profile cross-section cloverleaf-shaped, color scheme RAL according to customer specifications, dimensions adjusted to customer requirements at no extra cost, offer includes nationwide delivery and installation.

...Recessed Lights 4-Piece Set MARS complete with 21 Watt Transformer and a 10 Meter Cable 4 recessed lights ready for operation; can be expanded with individual Mars lights Dimensions of the lights each: Ø 42 mm Installation depth each: 46 mm Protection class: IP44 Drilling: 30 mm Cable: 1 m plug and 1 m coupling in series Material: Stainless steel, glass, plastic LED unit warm white 12 Volt 0.5 Watt durable light sources easy installation low heat generation Transformer 21 Watt Connection cable 10 meters...

... light source inside the recipient Low power consumption Supply voltage 12 – 15 VAC or +12 – +24 VDC With 5 m supply cable with molded, angled plug Short description: LED recipient lighting on stainless steel flange DN25KF, installation depth (xxx) 50, 75, 100 or 125 mm from sealing surface flange, connection cable 5 m with angled plug at the flange...

..._EGR has high insulation properties in the area of exhaust gas recirculation. Additionally, the protective sleeve exhibits high resistance to acids and alkalis. The tubular shape and extremely high expansion allow for easy and cost-effective installation.

... increased measurement reliability, as the common measurement point allows for direct comparison of the local display with the electric temperature sensor, and vice versa. • Installation costs for temperature measuring instruments are reduced, as only one measurement point needs to be set up for both electric temperature sensors and local temperature measurement. Design: 90° angled version, angled connector Display range: -30...50 °C, 0...60 °C, 0...100 °C, 0...120 °C, 0...160 °C, 0...200 °C...

...DIN 7081 made of SUPRAX borosilicate glass For installation in internationally standard level indicators, Auer Lighting offers a comprehensive range of reflective and transparent rods. This also includes high-pressure transparent viewing rods for use in specialized high-pressure fittings.

...Recessed Light Outdoor, MR16/PAR16, fixed, heavy solid construction with 12V socket for G4-GY6.35 base, max 50W, matte protective glass cover, Ø 82mm x 55mm installation depth, hole size Ø 72mm Recessed Light Outdoor, MR16/PAR16, fixed, brushed matte chrome, heavy solid construction with 12V socket for G4-GY6.35 base, max 50W, matte protective glass cover, Ø 82mm x 55mm installation depth, hole size Ø 72mm Item number: LEDE-BLGU53 EAN: 4260373594407...

... with, for example, mobile lifting devices and mobile overhead cranes. The vacuum suction cups can handle goods and packaging of various materials and porosities: wood, glass, stone, metal, cardboard, paper, and plastic. Load capacity: 250 kg...

...Foldable Signs 1000x700mm (other sizes available upon request) Our foldable signs can be mounted on all smooth surfaces such as glass panes, window frames, etc. They protrude from the wall in a triangular shape, making them optimally visible to viewers from various angles. Foldable signs are lightweight. They are made of 4 mm polypropylene hollow chamber panels, making them particularly sturdy. They come pre-folded and are equipped with double-sided tape for easy installation: simply clean the surface thoroughly, peel off the adhesive strip, stick it on, and you're done!

...Cr-V steel shaft with ¼" hexagon socket for screwdrivers, tempered, soldered carbide plate with roof cutting edge, sharp-edged and special ground surface: sandblasted Application Area Concrete, clinker, masonry, tiles, lightweight materials, light metals, plastic, glass. These drills can be used for dowelless fastening techniques using hardened special screws directly in concrete. Choose the core diameter according to the specifications of the screw manufacturer. Ideal for window and door installation, as the drill can directly penetrate wood, plastics, and light metals into the concrete.

...Open roller blinds with/without support profile - cassette roller blinds - blackout roller blinds Installation options • in the glass rebate • wall and ceiling mounting • skylights Operating options with • chain drive • center pull with spring shaft • slowmatic • motor Open roller systems with manual operation - with 32 mm, 36 mm, or 49 mm roller tube with 230 Volt electric drive - with 40 mm...

...Installation of PV systems with premium glass/glass modules from Jolywood in full black, including insured product warranty for up to 30 years by Munich Re.

... recirculation system equipped with European pumps and valves for a better performance Sight glass Viewing ports Double jacket Compact design Homogenizer with pump functionality. Blades designed to mix and knead. CIP system Steam system Vacuum pump Agitator with high tech anchor design Automatic open and closing system HMI and PLC with SCADA system Available certification up on your request: UL, CE, cGMP, FDA, ASME. Available documents up on your request: I.Q (Installation qualification), O.Q Operational qualification), P.Q Performance qualification.

...Consultation, installation, and removal of windows as well as extras (such as integrated ventilation systems, additional burglary protection) from a single source. Of course, you can also get your windows with safety, thermal insulation, sun protection, or soundproof glass.

...Weather protection grilles made of aluminum slats that snap into plastic slat holders using the patented twist-click system. There are 3 types of frames available - wall-mounted for flush installation, wall-insert frames for installation in wall openings, and window grille frames for installation in existing window sashes using glass retaining strips. We offer a wide range of slats.

... optionally be illuminated with BL1311 and has the dimensions: outer size 65 x 22mm, installation size 60.5 x 18mm, and label area 53.5 x 12mm. The nameplate button is used with RENZ, Max Knobloch, DAD, and until around 2010 JU.