filter media Germany

...The activated carbon filter FT-K is used for measuring critical pressure media or relative pressure media (overpressure or underpressure) with our devices when chemical compounds in the medium, such as SOx, HF, hexane C6H14, or others, need to be considered. The activated carbon filter FT-K is only suitable for filtering chemical compounds of low concentration in measurement lines without flow.

... measuring receivers in the range of about 100 kHz to several MHz. The lower measurement threshold is rarely below 50 pC (pico Coulomb), even in shielded measuring locations due to disturbances. With the help of the TE filter, a partial discharge level of ≤ 10 pC can be achieved with the correct setup of the test field. This is necessary, for example, to operate test fields for transformers. The permissible partial discharge level depends on the power class of the transformer.

...The ceramic tubular membranes for crossflow micro-, ultra-, and nanofiltration of liquid media, with non-circular channel geometries, provide maximum filter surface area per membrane.

...We design ETM fabric filters in both vertical and horizontal bag filter configurations, as well as cartridge filters. Our dust extraction systems are used in a wide range of industries. - Compressed air cleaned ETM fabric filters - known as pulse-jet filters with differential pressure-controlled cleaning in online or offline cleaning. - Bag filters as dust extraction systems in pressure-shock-resistant designs for explosive dust and gas media with certification. - ETM fabric filters as air stream adsorbers in flue gas cleaning systems. - Hot gas filters for special applications.

... - Fast change of media - Effective use of reagents - Cost and time saving Applications - Instrumental analytics - Micro-reaction technology - Biotechnology - Diagnostic - Analyses in the Life Science sector - Laboratory Automation Typical... - Flow rate: pump-specific 0.015 - 72 *ml/min - Smallest dosage volume: 0.25 µl - Differential pressure range: pump- and valve-specific 0 – 5 bar * - Maximum...

... washing, robot-guided high-pressure washing and deburring with a maximum of 450 bar. Bath Maintenance: Coarse dirt basket filter, full-flow filtration, gravity oil separator Heating: Electric or technical heat Installation Area: L x W x H = 3,000 x 2,000 x 3,000 mm...

...GUTSCHE High Performance Filter media are available as rolls or cut-to-length material, as well as ready-made filter bags. The common design variations from all major equipment manufacturers and filter types are constantly available from stock. Upon request, we can also quickly implement custom designs and specially tailored solutions for specific requirements. In this process, GUTSCHE customers benefit from our extensive experience with a wide range of applications.

...T-Filter (T-shaped strainers, T-type strainer) Type TF offer a cost-effective method for industrial filtration of liquid, gaseous, or viscous media. They protect pipelines, pumps, containers, and fittings from contamination. The T-Filters are made from a welded construction in accordance with the Pressure Equipment Directive 2014/68/EU based on the AD 2000 regulations, using steel or stainless...

...Filter Classes: E11, H13, H14 Application in temperature range between max. 65°C - max. 250°C optional frame systems in galvanized steel, stainless steel, MDF fiberboard closed-cell continuous seal, flat seal, seal seat test groove seal, silicone, Viton ... burst protection flange single or double-sided synthetic filter media electrical grounding increased filter area for filter inserts handles, loops, guide rails...

... techniques Minimal contamination–Porous material structure prevents cross talk between adjacent well walls. Proprietary surface modification – Materials allow multiple functionalities or sorbent addition, including CPG, carbon C18 or C8, and media is suitable for vacuum filtration, centrifugation or other positive pressure techniques. Tested by independent laboratories - Certified pure materials ensure performance, accuracy and reproducibility. Features Certified Pure Porex™ Materials Filter Media Purity – no material additives or contaminants No Heavy Metal Interference No other...

...The magnetic filter is used for fully automatic, continuous cleaning of liquid media from ferromagnetic substances. The magnetic filter consists of a stainless steel housing with an electrically driven magnetic roller, which is encased in a thin-walled stainless steel sleeve. It can optionally be equipped with neodymium high-performance magnets and can be individually adapted to specific spatial conditions due to its modular design.

...Revision of Systems and Equipment In addition to general maintenance tasks such as changing filter elements, servicing pressure accumulators, leak repairs, replenishing pressure fluids, cleaning and draining operating media, filling with fresh oil, tank cleaning, or complete oil changes, we also specifically conduct the periodic inspection according to the Pressure Equipment Directive or transfer already operational pressure accumulators into the Occupational Safety and Health Regulation (BetrSichV). Of course, our service personnel are trained as "competent persons."...

...AHN offers a wide range of high-quality pipette tips that are suitable for various laboratory applications. The options include filter and non-filter, sterile and non-sterile, with low retention properties and an ultimate finish, preventing liquid retention by dispensing. These tips are made of 100% virgin polypropylene in a state-of-the-art production facility located in Central Germany. The...

...Range from 350 mbar to 70 bar Overall accuracy up to ± 0.1 % FS Construction from stainless steel or titanium Wide temperature range from -40 °C to +80 °C Low power consumption Filter setting definable by the customer Excellent long-term stability Compatible with liquid pressure media that are compatible with stainless steel 316L, Hastelloy C276, or titanium...

...Filters protect against pathogens and exhaust gases, trap dirt, and absorb odors. Synthetic filter media offer a textile alternative for filters in heating, ventilation, and air conditioning, air and fuel filtration in automobiles, synthetic vacuum cleaner bags, and device filtration, with high separation efficiency and long service life. Made from the finest fibers, these nonwovens have a high...

...Pump with drive sliders made from various materials and a rotor. The blades can be made from high-quality plastics, iron, or bronze. The pump is made of steel or stainless steel. Blade cell pumps or rotary vane pumps are very robust and durable pumps for liquid transport. Particles or pieces are not a problem. Media ranging from low to high viscosity can be pumped. Steel or stainless steel version: robust and durable.

... service sector and consistently achieves good results. The company impresses with reliability, transparency, and a consistently good price-performance ratio. In the field of industrial cleaning, IROsoft - Cleantech relies on innovative and eco-friendly cleaning methods. To achieve effective and gentle cleaning results, we can utilize various blasting methods using a wide range of media, such as dry...

...The BWF Group is a medium-sized, owner-managed company group in its fourth and fifth generation, headquartered in Offingen/Bavaria. We are a leading manufacturer of textile filter media for industrial dust extraction, plastic profiles, technical felt materials, and wool felts. With twelve production sites worldwide and around 1,400 employees, we ensure market proximity, high flexibility, and the...

... distributes air purification devices for households, medical practices, and various other industries. The resource-efficient handling of materials, both in plasma technology (as no filter media is required due to the physical/chemical reaction in the plasma) and in the use of sustainably produced wood as building material, is a key feature of our guiding principles. Not only humans benefit from...

...We are a young company, founded by experts in indoor air purification. Our Vision@Mission is "sustainable, economically healthy air". This is what we stand for with the most modern and proven filter technology packed in a unique modular design. 75 years of filtration experience have gone into our filter media. Our products are German engineering, patented and manufactured in Europe. We are happy to receive customer requests and inquiries in our central sales office near Munich.

... the following services: test runs of each pump before delivery, in-house research in fluid physics, comprehensive product documentation, detailed application consulting, high availability of spare parts, product training and workshops, and 24/7 lifetime service. The product portfolio includes the following products: - Diaphragm pumps - Piston diaphragm pumps - Solid pumps, thick matter pumps - High-pressure pumps, plunger pumps - Triplex pumps - Triplex plunger pumps - Filter cloth cleaning pumps - Filter press feeding pumps - Spray tower feeding pumps - Powder pumps...

... devices are designed with consideration of the filtration components such as: • Media to be separated • Raw gas load • Fan performance • Filter area load • Filter material adapted to your application and specific requirements. We take care of the installation of our filtration systems as well as the necessary piping, including the installation of collection devices, and carry out a professional commissioning. Maintenance work on filtration systems is part of our services.

For many decades, helsa® Functional Coating has been creating functionally relevant product solutions for a wide range of applications as a specialist in elastomer and activated carbon technology. Whether it’s pollutant-adsorbing filter media or gas meter membranes manufactured to a hundredth of a millimeter, whether it’s odor-eliminating stoma filters or protective bellows materials, whether...

With the idea of independently and autonomously cutting the filter media of dGTecs GmbH, the foundation for the Laser unit has been laid. The expansion of our machinery now allows us to combine individual processes such as printing and cutting into a complete product. This results in complex components, eliminating the need for intermediate manufacturing transport. Our customers from industrial...

...Filters with a stable and durable construction can have a metal, plastic, or cardboard housing of any filtration class. We also offer a wide selection of filter media, available in rolls or cut formats. The strength of filters lies in the right material that retains airborne contaminants. They not only positively impact comfort but, above all, the health of people in ventilated spaces. Due to increasing public awareness, these products are gaining popularity.

...Air conditioning systems, ventilation and exhaust systems, process air systems, pallet cooling systems/cooling tunnels, energy optimization, media supply, industry-specific cleanroom technology, extraction systems, heat recovery systems, filter systems, UVC disinfection, climate technology, refrigeration technology, process air technology, automation, planning, delivery, installation, commissioning, service...