shaped parts Germany

...Turning is a core offering of ZERMOTECH GmbH. We utilize both CNC-controlled and conventional lathes. During the turning process, workpieces, known as turned parts, are shaped by the removal of chips. These rotate around their axis while the tool follows the desired contour. Our equipment includes eight CNC lathes of various sizes, which are controlled by numerical programs. Thanks to integrated...

... leather covers, and in dashboards. Our wire frames are shaped using state-of-the-art bending machines. The wire used has a diameter ranging from 4 to 8 mm. The bent semi-finished products are subsequently welded using robotic welding machines.

...Stamped parts are specially shaped sheets that are punched out as ready-to-install raw materials from lead or tin sheets. In addition to classic round or rectangular shapes, more complex geometries are also possible.

...completely eccentric turned component, IProGon® - screw-shaped polygon / polygon shaft with twist | polygon manufacturing through eccentric turning...

... accommodating the rings. In addition to standard rings for shafts and bores, there are now many special designs that feature not only circular ring shapes but also differently shaped ring ends and rings made from profile wires. Often, packaging in cartons does not meet customer requirements, which is why customized magazine forms are also common. We are happy to assist you in designing rings for your applications and provide advice in finding an optimal packaging solution.

...Automatic control of product distribution, Suitable for a wide range of products, Modular design, Operational data collection and storable statistics Our CP series multi-head scales weigh and count piece products – from snacks and confectionery to granules and metal and plastic parts. The following products can be packaged: Snacks & Crackers | Stick-shaped products | Cookies | Confectionery...

...Our stamped and deep-drawn parts are primarily processed further into assemblies. An example of a pure stamped or deep-drawn part is our drive wheel, which is installed on the camshaft in the engine. This is first stamped and drawn on an eccentric press. In the second step, the outer contour is shaped on a hydraulic press. This second process step is fully automated by robots, which take the semi-finished product from the feeder, align it, and insert it into the press. The finished part is then automatically removed and placed into packaging.

...Manufacturing of tubular heating elements in diameters of 6.5 and 8.5 mm. Stretched or shaped according to customer specifications.

...Construction features such as V-shaped design and lightweight materials to reduce vibrations and ensure optimal heat dissipation for a long operational lifespan.

... color reproduction was to be as neutral as possible. The result was a 3-part laminated safety glass (VSG), consisting of - a thermally shaped Antiqua outer pane as single-pane safety glass (ESG) with a sun protection layer, - a middle ESG with a thermal insulation layer, and - an inner laminated safety glass with UV protection. So far, Sollingglas has produced 950 such panes for the Semper Opera.

...Laser cutting and processing of pipes and special profiles, as well as flat, angle, and U-profiles with a covering circle diameter of 12 to 254 mm and a maximum raw part length of 6500 mm. We process for you: Profiles: round, rectangular, square, L-shaped, U-shaped, angles, flat, as well as many other geometries. Maximum wall thickness: Aluminum 6 mm; Stainless steel 8 mm; Steel 10 mm; Material: Structural steel, stainless steel, aluminum. Maximum diameter: Pipes with a diameter of up to 254 mm (covering circle).

...Filter classes: G3, G4, M5 Cut to any size Roll goods Shaped parts Temperature resistance up to approx. 130 °C...

... min-1 Angular displacement D-shaped surface A:° 180 Dividing device B:° 360 Drum for angular positioning C:° s210: 225 / s220: 180 Linear displacement X:mm s210: 25 / s220: 41 Linear displacement Y:mm s210: 80 / s220: 41 Vertical displacement milling head Z:mm s210: 150 / s220: 133 Manual Q axis:mm s210: 45 / s220: 33 Manual RB axis:mm s210: 20 / s220: 20 SP axis:° s210: 360 / s220: SP1/SP2 360 Tool...

...Pacifier Chain Accessories & Baby Articles Only the best quality for your child! We stock a large assortment of standard items such as as clips, round and shaped beads, milling and turning parts, rings, half rings, letter cubes and much more. Just ask for our price list. Even custom-made parts (including individual printing or individual embossing / laser engraving) according to your wishes and specifications are possible at any time! ...

...Belt width: 500-1400 mm Recommended speed: max. 3.0 m/s Quick and simple exchange of wear parts Blade material: polyurethane (optional + aluminum oxide granulate)...

...Covering hoods/shrink hoods provide protection against moisture, dust, damage, and ensure stability. When products or pallets are placed outdoors, you can protect them from wind and weather with pallet covers. Depending on your needs, you can shrink the hood size to fit the appropriate packaging size using a welding machine. Covering hoods offer a solution for pallets or large products, for irregularly shaped parts, or machines.

...Through our partner companies, we provide cold- and hot-formed screws, custom-shaped parts according to drawings, and nuts up to M72 made from high-quality materials. International certifications, especially for highly stressed connection components, are a matter of course for our partner companies.

... good sliding properties. The coating can also be applied to complexly shaped parts - with uniform layer thickness and layer properties throughout. The Ematal layer is thermally insulating and, with a breakdown voltage of 35 to 50 V/µm, is also an electrical insulator. Processes: - Ematalizing - Hard Ematalizing - Hard Anodizing...

...KEM 2-200 Edge Deburring Machine in heavy-duty design with a large support table equipped with rollers on all sides, two brush units, and a pressure bar for holding the workpieces. This machine is also available in a smaller, customized size to meet your needs. The machine is suitable for flat sheets as well as for edge processing of shaped parts, e.g., deep-drawn workpieces.

...The metallurgical industry uses EXCOR ABRIGO crepe paper, particularly for packaging irregularly shaped parts. Thanks to its stretchability, the crepe paper conforms to the shape of the parts without tearing. Its crinkled structure also provides cushioning properties. VCI crepe paper can be coated on one side with polyethylene to provide waterproofing. The creping of the paper increases its...

...ETHOS Bench with Backrest. With side panels made of flat steel. The seat and backrest are ergonomically shaped and consist of a mesh made of 8 mm round steel. All steel parts are hot-dip galvanized and powder-coated. For bolting down, fastening materials are included in the delivery. Delivery: Disassembled on a pallet. (Drill holes for retrofitting armrests are always standard). Bench shape...

...A manually operated round bending machine suitable for rounding or conical rounding of sheets for the production of tubes, gutters, half-shells, and other various shaped parts.

... feeding of different types of rivets ▪ Variety of different workpiece types ▪ Optimally shaped workpiece carriers (manual or automatic changeover) ▪ Short cycle time through robot handling even with extremely different rivet positions ▪ Process reliability during riveting through force path measurement system Made in: Germany...

... constantly in light motion. The shell encourages frequent changes in seating position and promotes upright and active sitting. - stackable (maximum 5 chairs) - C-shaped frame, open at the front and springy, made of welded and specially tempered round and oval steel tubing - metal parts powder-coated according to RAL palette - plastic floor protectors with integrated tread protection and colored size identification - aesthetically pleasing, ergonomic PP plastic molded seat shell with concealed seat shell attachment - various shell colors Body height - seat height - suitable...

...Grinding discs, specially designed for the finishing and fine machining of metal parts of various types and geometries. The wide working surface allows for large-area operations. Disc-shaped milling tool, specifically suitable for the finishing and fine machining of metal parts of various types and geometries. Machining of all types of steels as well as non-ferrous metals is possible. The wide...

...Channel components and shaped parts with rectangular cross-section Sheet metal channels and shaped parts with rectangular cross-section Materials: Galvanized steel, stainless steel, aluminum Sheet thicknesses: 0.6 mm to 1.15 mm for pressure ranges -500 Pa to +1000 Pa and -750 Pa to +2000 Pa Execution: Tightness classes A, B, or C according to DIN EN 1507. Longitudinal seams folded, cross connections with snap-on or profiled frames. Guide plates according to DIN EN 1505. Walls reinforced with trapezoidal ribs, as well as, if necessary, with internal stiffening pipes.

...Armrests and covers made of, for example, solid beech wood, shaped and also with insert nuts, coated with flame-retardant clear lacquer. If you have any questions, please contact us.

...ABM Greiffenberger hoist drives lift loads from 3.2 tons to 40 tons (4:1 safety factor, FEM 2m) with absolute safety and reliability. The aluminum housings ensure low weight and high corrosion resistance. U-shaped mountable rope drums allow for easy and space-saving installation. With 40 years of experience and over a million lifting technology drives: this is the solid foundation for ABM...

...We offer you sheet metal processing of construction steel, stainless steel, and aluminum in cooperation with one of our professional partners. From prototypes to large series, sheet metal parts are cut and shaped quickly, cleanly, and flexibly. Areas of application: Vehicle components Plant components Architectural components Electronic enclosures Machine housings Device housings...

...Thread grinding machine GAS for external threads and similar profiles: Typical components include ball outer threads for vehicle steering systems, as well as gearbox screws and smaller pump and meter spindles. Designed for shaft-shaped component geometry, these machines are equipped with a horizontal workpiece axis. The processing of the parts is carried out exclusively using the discontinuous...