metal coatings Germany

...In the field of plastics we offer metal strips with PVC plastisol and/or organosol coatings, as well as polyamide plastics. PP (polypropylene), PE (polyethylene), PC (polycarbonate), PET (polyethylene terephthalate) and PLA (polyactide), TPE (thermoplastic elastomer), TPU (thermoplastic polyurethane) and others. These can be produced with a layer thickness of 5-200 μm Depending on the plastic...

...We offer liquid and powder coatings for metal and aluminum constructions. We provide a comprehensive range of liquid and powder coatings for the steel construction sector, as well as for coatings of aluminum profiles and facade cladding. While our products are equipped with industry-leading features such as corrosion and UV protection, and can withstand even the harshest weather conditions, they are also VOC-compliant and environmentally friendly.

... specially alloyed steel. We produce complex forms and assembly parts with a strip thickness of 0.15 to 3.00 mm and with a strip width of up to 120 mm; the strip thickness will be dependent on the material. Strip materials: Carbon steels, Stainless steels, Cold-rolled strips, Slit strips. Non-ferrous strips: Brass, Copper,Bronze,Special alloys such as K55 or K75. Strip coatings: Tin-plated, Galvanised, Silver-plated, Gold-plated, Painted, Partial coatings, Special coatings on request.

R.E. Müller GmbH was founded in 1977 as a company specializing in contract galvanizing. In 1989, the operation was first transformed for powder coating and has since developed into a specialist for powder coatings over the years. In 2000, R.E. Müller GmbH was taken over by Uwe and Manfred Sarnoch. At the end of 2021, Marco Kluttig took over the management. We love color and have been a powerful an...

Moving more for our customers – that is the vision of Buchert + Feil. Therefore, we incorporate our knowledge and experience into each of our manufacturing areas. Comprehensive and individual support before, during, and after project completion, combined with a time- and cost-oriented project management, creates transparency and planning security. Deeply connected to the region and committed to ...

...ASTROPLAST - Metal - Top rings are made from various materials such as aluminum, sheet steel, stainless steel, or copper. The single or double-walled rings are generally hermetically welded on the outside. They are insulated with non-combustible mineral wool. Profiled flanges, tailored to all roof shapes, pose no problem for us due to our many years of experience. Color coatings are possible both inside and outside in any RAL color shade. Of course, execution drawings are created before production for mutual coordination.

...In powder coating, powder paint is applied to an electrically conductive metal surface. Powder coatings cover a very wide color spectrum and are available in various gloss levels and surface effects. The selection of the coating system can be optimally tailored to the requirements in the application area of the components. Powder coatings are often used where technical functionality and decorative effects are important. Areas of application: Mechanical engineering, automotive, furniture manufacturing, art and utility items.

...Surface finishing powder coating, over 100 colors to choose from We offer you the opportunity to customize your products in your preferred colors. For our sheet metal processing, only the best surface technology is good enough. Our modern powder coating facility and 2 water wall spray booths for wet paint in airless application ensure vibrant colors on your products. Possible dimensions of the bodies Wet coating: 2500 x 2000 x 2000 mm Powder coating: 3000 x 600 x 1500 mm Wet coating: 2500 x 2000 x 2000 mm Powder coating: 3000 x 600 x 1500 mm Location: Germany...

... components. The recovered precious metals are then available to you as raw materials for new semi-finished products or as marketable materials. For more information on the use of recycled materials, please refer to the Precious Metal Service section.

... Material Defects SELECTED APPLICATIONS Metal: Hot Rolling and Continuous Casting; Painting and Coating Plastic: Film Extrusion and Extrusion Coatings; Laminating and Molding Glass: Monitoring Flat Glass Production; Production of Glass Wool Paper: Coating and Laminating; Drying of Corrugated Board FEATURES Ethernet TCP/IP Interface Directly on the Device Analog Outputs 3 x 4 – 20mA PC-Independent...

...Application Areas at the Customer Used in galvanic processes, coating systems, precious metal coatings, wire coating systems, dosing stations with filtration systems and water systems Features of Our Valves Acid and base resistant Compact design High flow capacity Easily replaceable magnet...

...+5° to +40° C. Application: Bonding of panels, wooden strips, window sills, building materials, metal connections, shipbuilding, etc. Temperature resistance: -40° to +90° C Processing temperature: +5° to +40° C...

...Bulk anodes – in the form of balls, pellets, and sticks – originally come from the field of metal refinement or galvanics. Their industrial application range is extremely versatile. They are mostly used as pure metals (Sn99.9 / Sn99.99 or Pb99.94 / Pb99.99). The main advantages of these formats include both excellent dosability and the combination of surface volume ratio and material utilization efficiency. The efficiency of bulk anodes is often higher compared to the also frequently used rod or plate anodes.

...Functional coating with metal, ceramic, and polymer...

...The OXSILAN® process is an environmentally friendly and multi-metal capable pre-treatment technology. In this thin-film technology, layer thicknesses of only about 100nm are applied. The OXSILAN® technology is compatible with all conventional liquid paint and powder coating systems and is suitable for: - replacing zinc and iron phosphating - treatment before painting - as a bare corrosion protection - for passivation...

...Powder coating is a process in which electrostatically charged powder is sprayed onto the components to be coated. After application, the components are placed in an oven where the powder is melted at 250°C and bonds with the base material. The coated steel and metal parts achieve long-lasting protection against corrosion, ensuring durable usability. We achieve a resistance of the components in...

...Powder coating is currently the most sustainable method for finishing metal surfaces. It is fast, environmentally friendly, and the results are extremely weather-resistant. Almost any metal surface can be powder coated. We powder coat steel, stainless steel, aluminum, such as car rims. We can coat according to RAL, NCS, and other special colors are possible. Hand booth for quick color changes...

...From galvanically galvanized zinc die-cast products as frame or drum goods to highly decorative surfaces - we make almost everything possible! The pre-treatment, such as grinding or polishing, is carried out internally by our experienced specialists and our certified quality work. With the help of our competent partners, nothing stands in the way of your wishes and requirements. You can choose between metallic and color coatings, such as wet and powder coatings, depending on your needs for the surface of your product.

... mm in length in cooperation with our partner companies. Spray galvanizing of steel surfaces through metal spraying in the arc melting process. Complete restoration of old wrought iron works such as fences, railings, and balustrades through sandblasting, repair and reproduction of damaged elements, hot-dip galvanizing, and topcoating.

...Metal finishing in just a few seconds – exactly where you need it. The process sets new standards, especially for large or complex components.

...In addition to traditional grinding and polishing work, we also carry out metal cleaning or matting of metal surfaces using a glass bead blasting system. A special highlight is the repair chrome plating of classic cars or the coating of individual parts and small series.

...Because metal is not just metal.

OFB Oberflächenbearbeitung Kimax GmbH is located in Herzberg, in the triangle "Berlin – Dresden – Leipzig". Our many years of experience enable us to work with consistently high quality, allowing us to manufacture high-quality products for our customers from all over Germany, the Netherlands, and Denmark. In this context, we can create perfect surfaces through grinding and polishing with mechanic...

...Coating of steel sheet with phosphating as a pre-treatment Coating of metal / machine doors...

... - Slip Resistance R11 - 5 liters - Coverage: 5 m² - Easy application with a roller or alternatively with a spatula - Drying time (at 20°C) approximately 24 hours under light load and about 48 hours under full load - Resistant to extreme temperature fluctuations - Excellent adhesion on metal, concrete, and wood surfaces - Two-component base Color: gray...

... sealed assemblies. Gold and Aluminum coated fibers are capable of withstanding extreme temperatures and harsh environments. The manufacturing process utilized in the production of these fibers result in low stress corrosion susceptibility, and thus offering improved mechanical protection to the optical fiber when used in the most challenging harsh environments. All metal coated graded index...

...Chromoptic for Plastic Parts. We coat plastic parts with a highly decorative metallic appearance. The method used is a combination of painting and vacuum metal deposition. The appearance is very similar to that of galvanic chrome plating.

...The surfaces still need to be ground and polished. Metallic joint implants must have a high surface quality, as they often interact with polymer components, ceramic components, or metal components. The illustration shows femoral components and tibial components of a knee joint after polishing. The roughness values must be well below Rz < 1µm. After that, coating is applied, e.g., with TiN.

The services of WOBEK-Design GmbH include decorative powder coating, environmentally friendly application of metallic surfaces using the PDV process, as well as airbrush and coatings with other liquid coating materials, thus ensuring optimal surface protection for your materials.

...The coatings can also be heat or chemical resistant and offer decorative solutions. Advantages include personalized customer service, individual consulting, and quick processing. Our offer is primarily valid within a 50 km radius of 92690 Pressath, but customers from further away are also welcome to reach out.