metal alloys Germany

...Gold-reduced precious metal alloy based on gold, intended for metal-ceramic dental prosthetics or as a dental casting alloy, type extra hard, according to DIN EN ISO 22674 Color: yellow For more information on composition, technical details, or processing, please refer to the instructions for use in the lower section. Item number: 00611...

... specially alloyed steel. We produce complex forms and assembly parts with a strip thickness of 0.15 to 3.00 mm and with a strip width of up to 120 mm; the strip thickness will be dependent on the material. Strip materials: Carbon steels, Stainless steels, Cold-rolled strips, Slit strips. Non-ferrous strips: Brass, Copper,Bronze,Special alloys such as K55 or K75. Strip coatings: Tin-plated, Galvanised, Silver-plated, Gold-plated, Painted, Partial coatings, Special coatings on request.

... anti-friction systems, directly rubber- or plastic-coated metal strips. Since 1989 we have been the first company in the world to offer our customers the opportunity to have their goods delivered "endlessly" wound with more than 200,000 metres in a single strip on metal or plastic spools. Depending on our customers' requirements, we can process all wrought aluminium alloys, stainless steels, steel grades and non-ferrous metals available on the market in various degrees of hardness.

Our offering in the dental field includes consumables, dental alloys, as well as medical instruments and technical equipment. Additionally, we buy and sell precious metals.

...Possible manufacturing weight up to ~100 kg. This depends on the base material and, of course, its density. Forged in a die, heat-treated, and machined, followed by surface treatment. The manufacturing is carried out based on lightweight construction principles using aluminum or magnesium alloys.

...We trade in non-ferrous metals Trade in non-ferrous metals Our strengths... • over 100 years of tradition • competent, trained professionals • large metal warehouse • own fleet • modern equipment • successful quality management system • certification as a waste disposal specialist In our own smelting plant, copper, lead, and zinc alloys were also produced until 1980. Our goal is to ensure a reliable supply for our customers, who further process non-ferrous metals into high-quality products.

...Manufacturing Areas Materials: Steel, stainless steel of various alloys, spring steel, aluminum, other materials upon request Enclosure Construction Special Machine Construction Plant and Equipment Construction Machine Covers Fixture Construction Automotive Product Optimization Quality Inspection Logistics Services ...

... iron, heat-treated, and stainless steels. These molds are created by dipping in ceramic slurry layer by layer, followed by sand application. The shells must be dried between each layer. This process, which typically takes several days, is shortened to just a few hours through the use of a drying tunnel. Subsequently, the models are melted out and the ceramic is fired. After pouring metal into the molds, the ceramic is mechanically removed. The parts are then separated and finished.

...Recycling and trading of non-ferrous metals - like tin, indium, lead, silver, bismuth, antimony, and their alloys. We want the old As Germany's most versatile tin and lead smelter, reliable and fast service is crucial for us. The purchase of metals and scrap is of significant importance – as well as their professional processing. With state-of-the-art pyro- and hydrometallurgical facilities, we process your materials efficiently and in an environmentally friendly manner.

... • Special alloys upon customer request Delivery lengths: • Up to 4,000 mm • Fixed lengths according to customer specifications Flat bars: • Finished size: 22 x 12 mm to 330 x 28 mm • Delivery size: 24 x 14 mm to 332 x 30 mm Tolerances: Outer diameter (OD): • + 0.6 mm, - 0.0 mm Inner diameter: a) - 1.0 mm, + 0.0 mm up to 100 mm OD b) - 1.5 mm, + 0.0 mm over 100 mm OD Finished size: 22 x 12 mm to 330 x 28 mm Delivery size: 24 x 14 mm to 332 x 30 mm...

...Pickling is chemical etching of metal surfaces using an aggressive, alkaline solution to remove applied metal layers or to get an oxide-free surface (activation of the base metal for further coating). Maximum measurements 4000 x 1000 x 500 mm Material:aluminium, aluminium alloys...

... sphericity, narrow particle size distribution, low oxygen content, and good flowability. Currently, metal powder materials for 3D printing mainly focus on iron, titanium, cobalt, copper, nickel, and other metals and their alloys.

R.B GMBH is a registered company in Germany with its headquarters in Berlin, founded in 2004, and also has branches and partners across Europe. Our main activities focus on the import/export of wood. We serve all industries that require premium quality hardwood, softwood, sawn timber, construction timber, and roundwood, maintaining our competitive advantage by managing the entire supply chain fr...

... Features Optical recognition and origin definition of blanks Diamond with the revolver toolholder Machining of LuniNova pockets and micromilling Simple programming interface on Windows A variety of automation systems are available to ensure a high level of autonomy in production Materials:gold, platinum, silver brass and other non-ferrous alloys Camera VGA Sony XCD-V60 (640x480 pixel):Sell size...

... that offers improved resistance to chemical influences when used with melting preparations. Application Area Syncarb UL & ISO SiC R provides superior performance for aggressive and erosive conditions with high flux usage in both copper alloys and precious metal recovery. Syncarb UL & ISO SiC R is designed for use in gas, oil, and induction furnaces with low to medium frequency.

... edges, are self-locking, and therefore do not require screw locking. The flank angle for this thread type is 60°. They are primarily used as fastening threads for fastening screws in force-locking connections, such as: - External threads for barrel fittings - For closure screws and grease nipples - For screw-in ends on pin screws - For a tight fit in aluminum casting alloys (standard and fine threads) - For screw connections with a stretch shaft - In aerospace Single-part spindle length: 7500mm Multi-part spindle length over: 7500mm...

...2219 - Titanium T40, T60, TA6V - Inconel NC15FE, NC22DND (Inconel 625), NC19FENB (Inconel 718) - Hastelloy X - Special alloys, XC18S, 15CDV6, KCN22W - Stainless steels Z10CNT1811, Z10CNT1810, Z2CN1810, Z6CNT1810 Heat Treatment Processes - For all processed materials...

...Additional benefits of the Heracast iQ Plug-and-Play Short casting times of three to five minutes Powerful high-frequency generator No metal loss during casting No inclusions of graphite or ceramic parts Suitable for all precious metal and non-precious metal alloys Compact design Scope of delivery 10m compressed air hose (Ø 13mm), including 2 hose clamps and a 13mm nozzle Crucible holder key Cooling water filling container with hose and coupling 2 × door – warning signs "Caution! High Frequency. Prohibited for persons with pacemakers" Item No.: 6600 4331...

...Smooth and high-gloss metal surfaces up to Ra 0.02 µm – reliable and reproducible. In addition to stainless steel, aluminum, titanium, tool steel, and copper, almost all alloys are possible.

... specially developed for the protection of metallic voids. Covering the bottom of a box is sufficient to protect the internal walls against corrosion with VCI. PERIGOL VCI 230 is compatible with many engine and transmission oils, so generally, removal is not necessary. Upon direct contact with the metal surface, PERIGOL VCI 230 forms an oily and adhesive film, which can be removed with alkaline aqueous cleaning products.

...Our name says it all: We open a gateway to Asia, providing you with entirely new opportunities for sourcing your precision metal and plastic parts. Machined parts are produced in all easily and difficultly machinable metal alloys and plastics. Our focus areas include: • Aluminum • Plastics (POM, PA, PE, PVC) • Steel + Stainless Steel • Brass + Non-ferrous Metals In the field of milling...

...RAMPA sleeves type ES with wide cutting slot. Facilitates screwing into harder materials such as duroplastics, thermoplastics, lightweight metal alloys, and steel casting applications.

...worm gears and shafts, chain wheels, drive wheels - Bevel gears up to module 6 - Worm shafts up to module 10 - Keyed hub profiles, notch gears - Pinion shafts up to module 10 and 2,500 mm length - Deflection drums - Grooves up to 32 mm width and 250 mm length - Crushing tools for the hard stone and recycling industry - Material usage In addition to classic metal materials, we can also process numerous special materials: - Polyamide, Delrin, laminated press material - Aluminum, bronze, brass - Stainless steel - Cast iron - Special alloys...

... replacing fiber and grinding discs. - The durable heavy Y-woven backing features controlled, even wear, allowing for full utilization in medium to high pressure applications. - Integrated grinding aid reduces grinding temperature on heat-sensitive alloys, thereby extending lifespan.

...Corrosion protection and wear protection for almost all metal alloys: steel, stainless steel, gray cast iron, brass, copper, aluminum. Through chemical nickel plating, contour-accurate layers can be produced on precision parts that protect our customers' components from corrosion and wear. In this process, a nickel-phosphorus layer is deposited in a non-electrolytic manner and uniformly. The...

... throughout the entire country. The switch to lightweight metal alloys in 1972 diversified our product range. For example, we offer punts in various sizes, outboard motor boats, and a wide variety of boats for fishing, agriculture, and forestry.

...Sheet thicknesses: 0.5 to 30 mm (stamped, laser-cut; plasma-cut) Materials unalloyed and alloyed steels; stainless steels; brass, aluminum alloys Execution also processed (drill holes, threads; bent, folded); galvanized; phosphated; with coloring There are 4 facilities available, each with 10 - 26 employees. Welded assemblies up to 1 ton in weight including surface coatings Welding processes: MIG, MAG; Qualification according to DIN 18800 - Part 7, Class D Materials: unalloyed steels; stainless steels There are 4 facilities available, each with 12 to 150 employees.

...Metal Inert Gas Welding (MIG), Metal Active Gas Welding (MAG), Tungsten Inert Gas Welding (TIG), Gas Fusion Welding Welding Our material portfolio: Steel, cast steel, stainless steel, aluminum and aluminum alloys, copper and copper alloys, plastics. Welding: Metal Inert Gas Welding (MIG): according to EN ISO 4063 Process 131 Metal Active Gas Welding (MAG): according to EN ISO 4063 Process 135 Tungsten Inert Gas Welding (TIG): according to EN ISO 4063 Process 141 Gas Fusion Welding: according to ISO 857 – 1 Process 131...

...-approved vacuum recycling plants at its location in Leipzig, with varying sizes of usable space, including the largest vacuum recycling plant in the world with a usable space of 3 cbm. The current treatment capacity is approximately 500-1000 tons per year. Due to its years of experience, GMR Gesellschaft für Metallrecycling mbH is a sought-after partner in this industry. Our products and services: Hearing aid batteries, mercury, recycling of mercury and mercury-containing waste, watch batteries, processing of precious metal catalysts, precious metal dental alloys, recycling of used batteries...

JL Goslar GmbH has been an expert in the processing of lead, tin, and their alloys at the production site in Goslar for over a hundred years. We supply demanding customers from industry and research with pioneering products and personal service from our 3 business areas: radiation protection, apparatus engineering, and anodes - worldwide. Our success story is based on our philosophy, which we...