output Germany

... sealed design that ensures reliable operation without the need for subsequent adjustments of the internal optics. Due to the sealed housing, the lasers require very little maintenance and are particularly suitable for industrial 24/7 operation. The central wavelength is in the range of 266.02 nm and 266.07 nm (in air). The output power can be adjusted from 2 mW to 12 mW in 0.1 mW increments. The...

... the second palletizing system for output. Defective parts are automatically ejected by the robots. Leak Testing: ATEQ Cameras: 3 units Pallet Storage: 2 units of 20 pallets each Robots: Kuka KR5 Rotary Table: TC 2205 by Weiss...

...The TEC 55 was developed to meet the demand for high throughput rates. Flexibility, easy maintenance, simple settings, synchronisation with the infeed systems, flexibility and quiet operation were the priorities in the development of this machine. The machine achieves an output of up to 80 bags / minute. The most common options and accessories: - Hanger hole - Precutter for easy opening...

... output with signal generator (DC, 0-100kHz sine, sweep) •,Up to 100kHz bandwidth synchronously sampled across all channels •,16/24 bit resolution with 110+dB signal-to-noise ratio •,Compact dimensions (40 x 90 x 170 mm) •,Freely scalable! From one device with 4 analog channels to multiple devices with any number of channels •,1x Ethernet interfaces, connection for external 12V power supply, LVDS port for synchronization of multiple devices, USB port, IRIG input...

... done via a conveyor belt from a turntable. After filling, the sealing discs are placed from a stack magazine (optionally) and welded to the jar in the next station. The screwing of the closures can also be aligned and is performed with our GSM500 station with precise torque. Various output options are available.

... as other areas of bulk material processing with lump sizes of up to 280 mm. With its adjustable crushing gap, individually controllable rollers, and the use of various spike roller profiles, the final particle sizes can be tailored to specific products. The smallest achievable output particle size ranges from 0.5 to 20 mm, depending on the roller profile and gap width. The rollers can be operated in both synchronous and friction modes. Scrapers prevent the material from sticking to the crushing rollers.

...Directly available for order, custom sinus filters for speeds up to 100,000 RPM, for three-phase networks, rated currents from 2.5 to 500 A. Sinus filters modify the PWM output voltage of frequency converters and produce a nearly sinusoidal voltage. The sinus filter variants with housing - "IG variants" - additionally feature a common mode choke to dampen high frequencies and common mode disturbances. The type series 3AFS400 is designed for use in 400 V networks.

...) Temperature range: 50 to 3200 °C (depending on model) Optical resolution: 300:1 max Operating ambient temperature: Max. 65 °C; 315 °C with cooling jacket Protection rating: IP65 (NEMA4) Spectral response: 1.0 μm, 1.6 μm, 2.4 μm Accuracy: ±0.3 % / ±2 °C Resolution: 0.1 °C Response time: 2 ms, 20 ms (95 %) Power supply: 20 to 48 Vdc, 500 mA, or via Ethernet cable (PoE) Digital outputs: Ethernet, Profinet Serial output: RS485 Analog outputs: 0/4 to 20 mA Alarm output: Relay 48 V/300 mA...

... the upper layers of the atmosphere. The DK-ALD2 captures the barometric air pressure using specialized piezoresistive sensor elements. The signal processing electronics convert the current air pressure into analog standard output signals (e.g., 0...5V, 0...10V, 4...20mA with 24VDC supply; others available upon request).

...Assembly systems for motorcycle transmissions have a tradition at MP GmbH. The first assembly system was delivered in 1997. In the latest systems, housings and wheel sets are measured and then assembled to specifications. After assembly, tests are conducted on shifting, output speed, and backlash. All process data is archived in the MP assembly control computer. Traceability of the transmissions is ensured.

... display. Optional versions like e.g. an intrinsically safe version, max. 4 contacts and an analogue output complete the profile. Features: — nominal pressure: 0 ... 400 mbar up to 0 ... 600 bar — accuracy: 0.5 % FSO — indication of measured values on a 4-digit LED display — rotatable and configurable display module — 1, 2 or 4 independent PNP contacts, freely configurable Optional Features: — IS-version Ex ia = intrinsically safe for gases — pressure port PVDF — customer specific versions...

... impacts. The measurement output is digital via an I²C interface, with the address being customer-specific. Thanks to the bus capability of the interface, combining multiple sensors within a system is easily achievable. Measurement range:: 0...80% rH, 80 - 100% rH (short-term); -40..+100°C Accuracy:: +/- 1.8% rH in the range of 10..80% rH; +/- 0.2% rH in the range of 0..10% rH; +/- 0.2° C in the range of 0..60°C Operating pressure:: max. 150 bar...

...The W 15 is a particularly high-speed fine wire winding machine with a compact design. It features a quick-release tension at the tailstock. It is suitable for both single and multiple winding of relay coils, small layer coils, small transformers, transistor output transformers, etc., with a high number of turns. Due to its achievable high speed, ease of operation, and automatic winding process...

...-5 volt output. The CM's onboard electronics are protected by a rugged IP 65 (NEMA-4) stainless steel housing, allowing the sensor to function in ambient temperatures to 70°C (160°F) without cooling. Although small in size, the CM is loaded with advanced features. An RS232 digital interface allows the user to configure all programmable sensor variables with the powerful DataTemp® Multidrop software...

...• Rogowski coil with amplifier unit • Use with matched current sensor (Rogowski coil L-B22-175) for • universal measurement of alternating currents • standardized output signal 0 ... 1A • measurement ranges 250 ... 4000 A • power supply: 24VDC • compact design in plastic housing • mounting on DIN rail...

...MFZ SERIES – FIT 2 PART – YOUR TASK DEFINES OUR MACHINE. Highest performance and output per square meter, at the same time lower costs and higher productivity – that was the task for our engineers and developers at SAMAG MachineTools. The result: the MFZ series with FIT 2 PART. The conception of the new series leaves nothing to be desired. Technological know-how - for the highest precision...

...100% natural, premium briquettes from sustainable British sources. High-energy, sustainable wood fuel for all wood stoves and fire pits. NOW AVAILABLE! Six long-burning premium briquettes for all open fires, multi-purpose stoves, wood, and fireplace stoves. Each briquette: 295mm x 70mm x 70mm. Easy to use and store. Can be split by hand for smaller stoves. Heat output: 4.8kWh/kg. Moisture content below 10%. Exceeds the new Clean Air Quality Standards.

...High-quality low-cost sensor for OEM applications Precise germanium optics Thermocouple output type K Robust, insensitive sensor housing made of stainless steel Compact due to integrated electronics in the sensor housing Low power supply: 6 – 24 VDC and 25 mA...

...assimilation/output-bag for gas sampling system...

... easily integrated into an existing line. Operation: After the jars/cans are fed in, the infusion quantity is filled at all four dosing points with level regulation. Once the dosing quantity is reached, the jars/cans exit the machine while being simultaneously fed. The machine adapts to the respective line performance. Benefits: - Nominal output: Up to 3,600 jars/h - Drip-free and pressure-free dosing - Compact footprint - Adjustable dosing quantity...

...The right heavyweight on the battle ring of parking heaters. The Autoterm Air 9D is the latest and most powerful parking heater in the Air model range. It has recently replaced the 8D parking heater and is ideal for heating spaces such as workshops, small halls, or large boats. It is also perfectly suited for land and water vehicles like trucks, large vans, and boats. The heating output is adjustable from approximately 3.2 to 8 kW.

... optical signals - ideal operating mode for efficient and error-free testing of series parts * Internal data storage for up to 999 values * Continuous analog output: Linear voltage signal depending on the load (0 - 2 V) * Delivered in a robust carrying case * Selectable units: N, kN, kgf, ozf, lbf...

...These fully automated systems neutralize chemically contaminated wastewater by adding acids and/or alkalis. The neutralization system ensures that the pH value can be discharged into the sewage system in accordance with local discharge conditions. Taking into account the volume flows, the output parameters to be regulated, and the existing structural conditions, these systems are manufactured...

...Contact Assembly Line for Multi-Pole Connectors Technologies Used 3 Assembly Modules, Input & Output Cell and 8 Material Feed Stations Feeding of components via spiral and linear conveyors Separation (punching or cutting of the pins) Assembly & testing of contacts in the insulating body Positioning and bending/clamping of the pins in the housing Sorting of good/bad parts using optical masks and functional high-voltage testing Fully automated packaging by SCARA robots into trays...

...Conventional cooling ceilings reach their performance limits, especially in high rooms or in spaces with high heat output. This is due to the fact that the cooling or heating capacities generated there cannot be dissipated. With our high-performance cooling ceiling CapLS, it has now been possible for the first time to increase the heat and cold transport of the systems by 20%.

...The triangular base shape of this light fixture has a historical origin and is often used in listed buildings. The downward-facing light output allows for optimal illumination of the respective entrance area. TECHNICAL DATA Dimensions: 220 x 190 x 205 (H/W/D) Weight: 2.5 kg Purpose: House number light Writable glass size: 140x140 mm Interface: Wall mounting Material: V2A Surface: Brushed, RAL...

...We develop and manufacture transformers in low-frequency technology for you, which can be used for everything from voice transmission to high-end quality transmission. Transformers with low levels can also be magnetically and capacitively shielded. Our area of expertise includes the following transformer variants: - Input transformers - Output transformers - Intermediate transformers - Matching transformers - 100 V transformers...

... Headphone. Rear Interfaces: 1 x Audio Input, 1 x Audio Output, 6 x USB 2.0, 1 x VGA, 2 x Display Port, 2 x Mouse/Keyboard (PS/2), 1 x Ethernet (RJ-45), 1 x Serial (RS-232). Dimensions (WxHxD): approx. 360 x 175 x 435 mm.

... multi-core measuring cable is used, which is wound either single or multi-layer onto a cable drum equipped with a retractable spring. For large measurement lengths, a spindle-roller guide ensures that multiple layers of cable are wound precisely on top of each other. The number of drum rotations proportional to the length is measured optionally with a voltage or current output. In a similar design...