installation water Germany

... installation, we recommend using the DUAL 2 mounting kit. Advantages: - no chemical entry into the water to be disinfected - no odor or taste impairments - low maintenance operation - low operating costs Please contact us for comprehensive and targeted advice: email: uv-technology@purion.de Tel.: +49 3682 479087 Throughput: 10,000 l/h UVC Transmission: 90% T1 cm Water temperature: 2°C - 40°C...

...Application Areas at the Customer Installation in osmosis systems, cooling towers, ultrapure water treatment, irrigation systems, greenhouses, wastewater treatment Features of Our Valves High flow capacity Suitable for contaminated media Low closing stroke Free of non-ferrous metals...

...The mechanical robustness of the flush ceramic diaphragm facilitates an easy disassembly and cleaning of the probe in case of service. The outside-diameter is only 22 mm for easy installation and back fitting in 1″ tubes or in cramped fitting conditions Features — Nominal pressure from 0 ... 1 mH2O up to 0 ... 100 mH2O — accuracy: 0.35% (opt. 0.35 %) FSO — output signal: RS485 with Modbus RTU...

... — fully equipped with fittings upon request • Wastewater shafts — with channels and/or coatings or linings/tiles • Slab shafts — for complex installation situations • Diving walls • Monastic structures • Sand traps • Sinking boxes • Fall structures • Water meter shafts...

... as continuous or batch neutralization units. Durable and corrosion-resistant materials are used. Throughput capacity ranges from 20 l/h to 50 m³/h. All necessary installation and commissioning services, as well as subsequent maintenance work, are carried out nationwide by our own service technicians.

... regulations of DIN 4747-1, the requirements of AGFW, and the technical connection conditions (TAB) of the respective utility company. Hot water preparation in flow, storage, or storage charging principle with district heating controller Circulation module (optional) with thermal insulation (optional) Selectable connection variants Expandable to 5 heating circuits Low installation depth Floor clearance up to DN 32 / up to 100 kW up to PN 25 / 130 °C Integration into control technology (optional: remote reading, remote maintenance)...

...In many water laboratories our Universal Method Unit facilitates the complex process of analysing the basic parameters nitrate, nitrite, ammonia and ortho-phosphate. Installation of the Universal Method Unit on our FIAcomact device allows you to successively analyse all above mentioned parameters without a system modification. Method change is fast and easy requiring only switching the valves on...

...Easy installation, complete solution with minimal water consumption for reliable operation of double mechanical seals. Designed to maintain the water barrier pressure and water level without maintenance. The WSS comes with all necessary components and can be easily installed and connected.

...Energy and control cables in power plants, industrial and switchgear installations, as well as in local networks. For fixed installation indoors, in cable ducts, outdoors, and in water.

... assembly, manufacturing and service tasks. We rectify malfunctions and procure any required spare parts. We support you in the planning, delivery and installation of new components in your systems, modification, inspection and maintenance of existing components provided by us or third parties, and we also offer troubleshooting within the framework of a 24-hour standby service. Our services comprise: - Pressure vessels: Field service and repairs - Engineering - Boiler service - Piping - Workshop facilities for new production and overhaul of vessels...

...robust stainless steel design • Ambient temperature up to 85 °C without cooling • Optional water/air-cooled protective housing for ambient temperatures up to 175 °C • Optional ThermoJacket cooling housing for ambient temperatures up to 300 °C • Optional protective windows and air purge attachments • Laser targeting device (except LT-07, LT-15, P3) • Real-time background temperature compensation...

... washing, robot-guided high-pressure washing and deburring with a maximum of 450 bar. Bath Maintenance: Coarse dirt basket filter, full-flow filtration, gravity oil separator Heating: Electric or technical heat Installation Area: L x W x H = 3,000 x 2,000 x 3,000 mm...

... optics and fast response times, the Modline 7 provides the versatility to solve your most demanding applications. An intuitive sensor design, with integral water cooling in a stainless steel enclosure or high temperature waterjacket, reduces installation and setup time. Standardized installation accessories and common ModView™ Pro software platform minimize multiple product configurations at your factory. ModView™ Pro Software Modline 7 series features a suite of software programs and utilities to interface with the sensors, including ModView Pro software. With built-in user interface...

...Space is precious: Cooling water modules in container construction are considered an adequate solution. The required cooling unit is placed on the container roof. IKS thus offers a pre-assembled, function-tested complete system for external installation. Your benefit: a transportable unit that can be relocated later as needed.

... optimal use of your valuable floor space. The integrated frequency converter of the AQ VSD series adjusts the speed of the drive motor according to the compressed air demand. This significantly reduces energy consumption, allowing for a quick return on the additional investment. Proven reliability Consistent performance throughout the entire lifespan Simple and cost-effective installation User and maintenance friendly Low maintenance No issues with condensate disposal Soundproofed unit...

... pool. Wet paint particles in trace amounts that are not captured by the water curtain are collected by the separators at the suction channels behind the water curtain, and the exhaust is supplied with fresh air. The backwashing system is applied in the separator section to support the process of retaining the wet paint particles in the separators. The filtration efficiency, whose contact area is increased by spraying wash water through the nozzles, is maximized.

... alarm or service is required, an alarm is issued via potential-free contacts. The installation is very simple and does not require any parameterization. No indicators are required as an ion-selective sensor which is used for the measurement. This electrode is also the regular spare part, which can be easily changed without tools. Further maintenance work is generally not required. Process...

... of the systems so that you only invest in areas where there is a fire risk. Pragmatic solutions that offer the highest level of protection are exactly what you can expect from us. - Water supply - Pump system - Foam mixer - Water monitor - Spiral sprinkler - Piping - Installation and commissioning - Maintenance, service, support...

...Our GRP drinking water tanks have a cylindrical design available in horizontal or vertical configurations and are designed for installation (up to 1.00 m of earth cover).

... dehumidifies the surrounding air; a clean side effect in damp basements and rooms. Our heating water heat pumps are delivered ready to plug in and filled. This eliminates the need for a complicated installation. Their simple operation makes them a plug & play device. Control the TE-AWP in conjunction with your PV system and the V-Box or SMA Homemanager to optimize your self-consumption. Your advantages at a glance: ▪ retrofittable at any time for standardized flange ▪ the heat extracted from the air is transferred directly to the heating water via a finned tube heat exchanger...

...Solar thermal system for domestic hot water heating and heating support for installation on the facade or flat roof.

...{"Protection Class":"IP65","Installation Location":"in the pipe or air duct","Description":"With the flow sensors SWF62, SWF62L, and the evaluation device ASW454, the flow in liquids can be reliably monitored. The sensitivity can be adjusted using a coarse and fine potentiometer. The switching state is indicated by an LED. The sensor tip must be completely surrounded by the medium.\nFor...

...of pipelines for technical gases, laboratory gases, air flow, vacuum, water, as well as exhaust and flue gas systems.

...In natural watercourses, wastewater from municipal and industrial sources is often discharged. While there are clear legal regulations and official requirements for direct dischargers, the risk of a larger influx of light liquids in the event of an accident cannot be completely ruled out, especially with industrial wastewater. To prevent widespread pollution of the water body and the costly and labor-intensive cleaning that follows, the installation of an oil barrier with automatic adjustment to varying water levels is recommended.

...Waste Container DEVON Mounting Type: For embedding in concrete Made of steel sheet, material thickness 2 to 3 mm. Container base with water drainage holes. Unlocking / Emptying: Waste container can be unlocked and removed for emptying using a triangular lock, delivery includes 1 triangular key. Recommended installation depth 300 mm. Contents of waste container: 60 liters Mounting Type: For embedding in concrete Total Height: 1056 mm Total Width: 456 mm Total Depth: 266 mm Weight: 14 kg Surface: Hot-dip galvanized Body Material: Steel Body Surface: Galvanized Closure: with...

...Haase spherical tanks are used for the safe underground storage of wastewater, chemicals, and other water-polluting liquids. - They can be stored underground or installed above ground. - The tank has a three-wall construction: both the outer and inner walls are completely sealed and are continuously monitored with a leak detection device. - The middle wall made of special polymer concrete ensures stability: therefore, installation in traffic areas is also possible (depending on the manhole cover). References can be found at https://www.haasetank.de/referenzen.html...

... blocks (Isokorb) • formation of continuous water lips • installation of additional fastening and installation components • concrete quality C20/25 and C45/55 General: • Surface Quality: one side always formwork-smooth – the other side optionally hand-troweled, surface-troweled, wing-troweled, sandblasted or textured • beveled edges...

...New air-water heat pump with refrigerant R290 propane, featuring continuously adjustable heating capacity for outdoor installation.

...Meiko dishwashers: undercounter, glass, hood, transport dishwashers including installation, connection, and customer service. Delivery of the required cleaning chemicals from Etol. Germany: Offenburg Basket size 500 x 500: 230 V / 400 V Option: Water treatment...

...We manufacture and deliver thermoplastic plastic containers in round or square designs made from PP, PE, PVDF, and PVC. These are used in the areas of deionized water, ultrapure water, treatment, supply, and storage of chemicals and wastewater. The required sizing of the containers is carried out taking into account customer specifications, such as: medium, temperature, application location. In cases of limited installation space or restricted access openings, we also construct on-site containers.