high pressures Germany

...Autofrettage is a method for increasing fatigue strength of components for use at high and pulsating pressures. In short, Autofrettage compresses a container’s inner surface, making better use of the material’s structural properties. The process can reduce fatigue concerns in pulsating applications and lets engineers reduce tubing thickness in high-pressure applications without sacrificing...

... Features: — Nominal pressures: 0 ... 2000 bar to 0 ... 6000 bar — Accuracy: 0.5 % (Optional 0.25 %) FSO — Adjustability of the zero point and span via front-accessible potentiometers — Pressure connection 9/16" UNF — 80 % calibration signal with MIL / Bendix connector Optional features: — Ex version Zone Ex ia = intrinsically safe version — Pressure connections M20x1.5 and M16x1.5 — Accuracy according to IEC 60770: 0.25 % FSO...

... 300 -> 10 bar ~ 100 kN = 10 t DN 1000 -> 1.5 bar ~ 130 kN = 13 t Due to high forces, movements in pipelines of higher nominal size and higher pressure can only be absorbed with braced expansion joints. Applying braced expansion joints pressure stress can be absorbed, while fixed bearings can be dimensioned smaller. In case a 3-hinge-system cannot be applied due to missing space, special-purpose solutions like pressure-balanced expansion joints can be installed. Types of design for lateral expansion joints: ball bearing types with tie rods for all-side movements cross hinged types for...

... high-pressure version for monitoring tasks in compressed air systems is available, capable of operating at pressures up to 150 Bar, featuring a ½" screw thread. For outputting measurement values, both analog and digital interfaces are available, with the possibility of custom adjustments for the measured variable (dew point, relative humidity, ambient temperature) in analog output as a 4-20mA current loop or 0-5V voltage output, as well as a combination of several simultaneously outputted measured variables at the digital interface.

...Today’s demand for increased efficiency and flexibility that comes along with higher temperatures, increased pressures and high cycling requires specific engineered valves. We design and manufacture high quality trunnion mounted ball valves tailored to your specific control processes by using customized control discs. Our control valve product line is engineered to suit very high differential pressure applications giving you an exceptionally high rangeability for your plant operation.

...Application Areas at the Customer Coolant lubrication for drilling, milling, and grinding machines, Complete custom solutions upon customer request Features of Our Valves For high operating pressures For contaminated and aggressive media For high viscosity Compact design...

... withstand temperatures of up to 1200°C (2192°F). Both are designed for use in vacuum and carburizing applications and can operate in pressures up to 20 Bar (290 PSi). Data Logger The Datapaq TP6 is the perfect solution for the most demanding high-temperature profiling applications with a 316-grade machined stainless-steel case and IP67 rating. Once combined with the Datapaq Insight™ or Datapaq Insight...

...Industrial fans for transporting dust-free media, suitable for industrial extraction of combustion air in temperature ranges from -25ºC to +650ºC HIGH-PRESSURE FAN RE 2 Designed for pressures from 1,000 to 25,000 Pa Impeller diameter from 355 to 1,250 mm ------------------------------------------------------------- MEDIUM HIGH-PRESSURE FAN RE 3 Designed for pressures from 500 to 20,000 Pa Impeller diameter from 200 to 2,000 mm...

... % of full scale (CM3: 2 and 3.5 bar) DPI 500, DPI 510, DPI 515, DPI 520 emulation (easy replacement of an old pressure regulator possible*) Ethernet, USB, RS 232, and IEEE 488 interfaces included for external control LabVIEW driver available Optional additional functions: density testing function, test program, and burst test Optional additional outputs: analog output and potential-free contacts Optional barometric reference (for measuring ranges from 1 bar) for measuring and regulating absolute pressures (CM0-B, CM1-B, CM2-B) or for relative pressures (CM3-B).

...Long-term lubrication of machine elements exposed to high pressures, dust, or moisture OKS 671 - High-performance lubricant oil with white solid lubricants - Long-term lubrication of machine elements exposed to high pressures, dust, or moisture - Ideal for chains in dusty environments, e.g., in transport systems, packaging machines, and filling machines - Bicycle chain oil - Good corrosion protection Operating temperature: -30°C to +80°C Color: light Operating temperature: -30°C to +80°C...

... & gas, gaming, transport & infrastructure, and high-security & public space sectors. This industry-specific knowledge, combined with a flexible 'Can Do' attitude and proven technology, is what sets us apart. That’s why clients choose to collaborate with us.

...The ZRVL series with oil circulation lubrication is available in single-stage and two-stage versions. The series comes in sizes ranging from 4 m³/h to 1600 m³/h and is also available in ATEX. The ZRVL-D series consists of two-stage oil-lubricated rotary vane vacuum pumps. Due to their technical design, they achieve low final pressures and high flow rates. Thus, two-stage oil-lubricated rotary...

... controlled. We rise to this challenge! Our control ball valves are always tailored to the respective system parameters. By applying special control profiles and the ability to achieve high differential pressures, our valve solutions cover a wide range of load cases and operating modalities while maintaining the lowest possible torque and breakaway moments.

...Type Series PSP8-St and PSP10-St Features · Usable up to 125 °C · Static and dynamic pressures measurable · Thin-film application on stainless steel membranes · Measurement principle: change in bridge voltage · Elementary sensor without external active circuitry · Wheatstone bridge with low temperature coefficient and high accuracy · Minimal climate sensitivity · Various electrical connection...

...In the field of processing PPS, such as RYTON, we are among the leaders in the German plastics processing industry. Tolerances in the hundredth of a millimeter range are achieved by us. Such components are required, among other things, for the brake and engine industries. You will find our products in many car brake systems. They must be able to withstand pressures of over 400 bar. And that for the lifetime of a car.

...MAXIMATOR compressor stations for nitrogen or other gases are complete, ready-to-connect compressor stations designed to generate operating pressures of up to 2,400 bar. The equipment can be used for all types of testing, filling, or other tasks where high pressures are required. For all applications, MAXIMATOR offers a wide range of accessories. This includes pressure switches and pneumatically...

... - optimized for 1ml/min flowrate when using 8mm ID-columns - high pressure stability of 150-50bar, depending on porosity - high capacity from AppliChrom 8mm ID GPC columns (5% more capacity than 7,8mm columns, 14% more capacity than 7,5mm ID columns) - plus extra high pore volume from AppliChrom GPC synthesis technology for an extra increasing of peak capacity and resolution - proprietary AppliChrom GPC column packing procedure for accurate peak performance, low back pressures and an extension of column livetime...

... never be open at the same time, allows for very good sealing of differential pressures. electric drive: four standard sizes: 250, 315, 400, 500 mm and up to 0.4 bar differential pressure pneumatic drive: 250, 315, 400, 500 mm and up to 0.5 bar...

...Valilog, the data logger system from Valitech, is tailored to meet the requirements for validations and process monitoring under high temperatures and pressures. Our system, consisting of pressure loggers, temperature loggers (with long and short sensors), and dual temperature loggers, along with the corresponding software, is specifically designed for use in the validation of processing...

...Zenner high-pressure blowers in single or multi-stage designs are suitable for all applications that require higher pressures than the basic program. The high-pressure fans are used to generate high negative pressures, achieving the highest speeds with small sizes. Minimal clearance dimensions ensure low losses, and specialized impeller geometries provide high impeller strength and the realization of maximum efficiency. In the field of high-pressure fans, it is possible to manufacture a compact special design. Made in: Germany...

...able to offer different adapters through our own manufacturing depth. Quick and secure options In our connections, we replace conventional complex cutting ring solutions with quickly mountable adapters. By using O-ring designs, such as for DKOL and DKOS connections, safety, especially at high pressures, is our top priority. Adapters ■ for screw-in solutions ■ for angled solutions ■ for connection solutions...

... pressure fluid for industrial and mobile hydraulic systems of various designs. Very well suited for systems operating at high pressures. Excellent when specific wear protection requirements are placed on the oil. Can be used for the lubrication of bearings and gears according to manufacturer specifications. Advantageous in all applications where hydraulic oils according to DIN 51524-2 with demulsifying properties are required. Item number: HLP 10-20 l...

...especially containers and apparatuses for high pressures and temperatures in accordance with EU pressure equipment directives. New at Vau-Thermotech: High vacuum brazing, contract brazing, stainless steel brazing with a piece weight of up to 3,000 kg and dimensions of 1,200 x 1,200 x 2,000 mm possible. As well as non-European pressure vessel regulations; consulting, sales, trading, service, assembly...

... regarded for our sampling systems in the large chemical and petrochemical industries in China. NOVA closed vent samplers allow you to safely take samples of toxic, dangerous, and volatile substances, without any risk to your operators or the environment. NOVA also focuses on R&D, manufacturing, sales, and service of valves that withstand high temperatures, high pressures, low leakage, low flow...