boiler Germany

...BORSIG supplies synthesis gas boilers for gas pressures up to 350 bar (35,000 kPa) and steam pressures up to 160 bar (16,000 kPa). They are used in the synthesis gas loop of ammonia plants. The boilers are equipped with U-tubes and can be mounted both in the vertical as well as in the horizontal positions. With both designs, the steam drum can be integrated into the boiler if requested by the customer. At the same time, a feed water pre-heater can be installed in the boiler when required.

We offer a continuous container stock with generous options and guarantee fast delivery times and favorable conditions.

Manufacturing of steel and metal seals, as well as the distribution of metal seals...

Triptiser Edelstahl GmbH has been operating as an independent company within the Chroszielewski group since 1993, with its headquarters in Triptis. We are a medium-sized enterprise with various representations throughout Germany. Our goal is to find complex, feasible solutions for our customers according to their technically specific requirements and to implement these with quality execution. Due...

...Control and Dosage of Feed Water and Steam Boiler FWSControl FWSControl provides comprehensive control and monitoring of key parameters for the entire feed water and steam boiler system. The user-friendly operation leads to increased efficiency, safer operation of the plant, and savings in energy and costs. At a Glance - Measurement of pH value, conductivity, and residual oxygen content...

We are prosatech.de We are a young, customer-oriented company from Germany that specializes in the planning and distribution of air conditioning systems, VRF systems, and air purifiers.

...With over 100 years of experience in boiler engineering and plant construction, BORSIG Service GmbH is a competent partner for all boiler operators.

... high-quality integrated electric heating cartridge that can heat the water in the boiler to approximately 75°C. The heating cartridge automatically switches off once a temperature of 75°C is reached and also automatically switches back on if the temperature falls to around 70°C.

...A state-of-the-art air-water all-in-one drinking water heat pump, requiring minimal space and with a volume of 60 to 100L. Drinking water heat pump with a boiler and an attached mini heat pump unit for hot water supply in a household of 2-3 people with a shower. Alternatively for reheating pre-warmed drinking water to >60°C, to prevent legionella. Height from 100 to 130cm, diameter 47cm, hot water volume 60 to 100 liters, Mounting: Vertical or horizontal wall mounting possible.

...Oxygen Binding Agent for Steam Boiler Systems in the Food Industry The activated sodium sulfite contained in FINEAMIN 416 reacts very quickly with oxygen due to the additional catalysts. This significantly improves corrosion protection. FINEAMIN 416 contains no steam-volatile components and is approved for use in the food industry. Weight: 35 or 220 kg...

... industrial design Square or round for process air technology in industrial ventilation systems, custom-made for the user. Materials: Steel, stainless steel, or aluminum, sheet steel, boiler plate, stainless steel 1.4301, 1.4571, coated upon request.

... steel flue for fire safety and a special heating boiler for increased demands. The integrated dual-fuel burner is capable of burning both oil and gas. With the installed tank heater, the internal safety oil tank system is maintained at temperature. This ensures reliable operation with heating oil under all temperature conditions and guarantees a smooth process. If the existing tank volume is insufficient, external oil tank systems can be connected.

... / Engineering Tubes DIN EN 10220/10216-1/10297-1 and DIN EN 10210-1 also available in fixed lengths Seamless Boiler Tubes DIN EN 10220/10216-2 Welded Steel Tubes DIN EN 10220/10217-1 Railing, Threaded, and Construction Tubes Further grades and dimensions available upon request...

...Heating Center as the Perfect Layered Storage The newly developed and visually appealing system solution of the Thermen-Compact Storage TCS is a buffer storage with an individually integrable gas condensing boiler, which can be perfectly coordinated. The compact design allows for quick and easy installation. The gas condensing boiler, which can be integrated behind a high-quality door, enables a...

...Liquid sanitary cleaner for all acid-resistant surfaces WC-Fresh actively cleans all acid-resistant surfaces with pure citric acid. It is particularly well-suited for cleaning tubs, sinks, tiles, fixtures, and stainless steel, effectively removing not only limescale but also rust and grease stains, as well as boiler scale and cement haze. WC-Fresh is safe for chrome.

...in the chemical and refinery industries Reforming plants Boiler systems and exhaust systems Semiconductor production The following gases can be detected: CO (carbon monoxide), silane, methyl cyanide, acetyl cyanide, arsine, bromoisocyanate, butyl isocyanate, butyl isocyanide, chlorisocyanate, chlorodimethylsilane, bromocyan, dichloromethylsilane, ethenone, ethyl thiocyanate, germane, hexyl isocyanide, ketene, methyl isocyanate, dinitrous oxide, ...

... outskirts of Rome. The cyclones are used for the pre-separation of fly ash coming from the boiler. Due to the abrasive properties of this dust, special attention must be paid to the design of the separators as well as the selection of materials. An extremely wear-resistant material is used in conjunction with additional wear protection measures in particularly vulnerable areas of the separator. In this way, extremely long service lives can be achieved. Each of the individual cyclone separators has a diameter of 3 m and a total height of more than 15...

...Clean and economical, better for the environment and your wallet; environmentally friendly; less maintenance; longer boiler lifespan; low odor We supply low-sulfur heating oil (DIN 51603-1) that is ultra-light liquid, originally developed specifically for oil condensing technology, but the benefits apply to all types of oil heating systems. • environmentally friendly • lower heating costs • up...

...2 x plastic glass baskets Rinse water requirement per wash cycle: 2.75 liters Program duration: 2 minutes Total connection value | Voltage: 2.58 kW | 230 V | 1Ph Tank temperature: 55 °C Boiler temperature: 65 °C Tank volume: 5.75 liters...

... • Particle filter • Pressure relief valve • PREE BREE SYSTEM (patented coffee pre-brewing process) • Microprocessor in the control panel manages coffee dosing • Automatic boiler filling • Automatic cleaning of a brewing group • 4 different programs for dosing per group • Control light for boiler Technical Data: • 1 brewing group • 1 steam tap • 1 tea water tap Boiler capacity: 6 liters Connection value: 2.85 KW / 230 V 50 Hz Dimensions (W x D x H): 475 x 580 x 523 mm Weight: 35.4 kg...

...JAT 4130 KG is a phosphate-free product from the boiler water treatment series. It stabilizes hardness, disperses iron, and serves to condition boiler sludge. The hardness slip from softening plants leads to deposit formation in the boiler system, which hinders heat transfer, reduces efficiency, and often necessitates extensive cleaning. Softening plants have a hardness slip that ranges between 0.1 to 0.3 °dH. This slip results in boiler scale, which obstructs heat transfer and can lead to severe damage.

...Only the best for your oil heating! - lower boiler deposits - better combustion - less soot - fewer emissions - savings of up to 7% possible - pleasant scent - higher storage stability - clean tanks and pipes We can deliver any desired quantity on the day of the order!

... in process cooling. Our heat pumps are distinguished by their compact, energy-efficient design and the option to install them wall-mounted (similar to a gas boiler). In the regulation of our heat pumps, we use components that have proven themselves in the industry, ensuring that spare parts supply is secured in the future. Our range of heat pumps includes water/water heat pumps, brine/water heat pumps, and air/water heat pumps with a power range of 5 to 17 kW.

...and moved here. On a property area of 90,000 square meters, there are no limits to additional manufacturing capacities. Since 2004, we have been producing in Rathenow, thereby continuing the more than hundred-year tradition of boiler and apparatus construction in the city. Series production with repetitive characteristics is the focus of modern sheet metal production with laser, punching, plasma...

Since 1996, we have been producing and assembling pipe spools, pressure vessels, special fittings, and custom components made of steel for industrial needs. After a continuous growth from 7 to 50 employees in just 8 years, we have become a reliable player in our market segment in terms of reliability, punctuality, and quality. With the ISO certificate ISO 2001:2008 and ongoing know-how adaptation...

... water treatment - Cooling water treatment - Chemical and microbiological water analytics - Measuring instruments and devices for water testing - Online analyzer for water hardness - Water disinfection using UV light - Biocides for cooling water - Inhibitors for boiler water - Corrosion protection for drinking water pipes...

We are your competent supplier for bitumen cookers, casting compounds, repair asphalt, as well as gas burners for smoking ovens, boiler systems, breweries, distilling spirits, field kitchens, beekeeping, and industrial burners. Additionally, we specialize in the following areas: - custom gas burners or gas burner solutions from development to production - for industry, craftsmen, as well as...

LTC - Lufttechnik Crimmitschau GmbH is a medium-sized company in the machinery and plant engineering sector. LTC manufactures air technology systems for air purification and climate control for public buildings as well as for industrial buildings. Additionally, LTC produces containers, tanks, and special apparatus for the chemical and pharmaceutical industries, as well as for related sectors in t...

LASER Blechbe- & -verarbeitungs GmbH works with state-of-the-art laser cutting systems as well as bending and folding machines. With our current 23 employees, we are a strong partner in the supply sector for metal, steel, and mechanical engineering in Germany. We collaborate with both traditional machine builders and manufacturers of containers and housings, as well as with the furniture industry,...

We are a powerful medium-sized company in the apparatus, container, and machinery construction sector with approximately 100 employees and trainees. Our headquarters, with about 10,000 m² of production and assembly space, is located in 39418 Staßfurt, about 30 km south of Magdeburg, directly on the A14 motorway, in close proximity to the inland ports of the Elbe in Aken and Schönebeck, as well as ...