bar installations France

... compatible internationally. More information on our website: www.prevost.fr Or on our YouTube channel: https://www.youtube.com/channel/UCRFAuStAuAHP8F6U8lZM9SQ Technology: Safety Flow rate at 6 bar: 3530 l/min (ΔP = 0.6 bar) Temperature: -15°C to +70°C Operating pressure: 0 to 16 bar Passage diameter: 10.4 mm Material: Stainless Steel...

...The Ecoflow utilizes the COANDA effect to generate large laminar flows at high speeds with a very low volume of compressed air. The amplification ratios are 25:1, which results in a 40% reduction in compressed air consumption and a 10 dB decrease in noise levels compared to traditional blowing methods (perforated hose, nozzle, etc.). On this profile, an antistatic bar is installed, releasing...

...The P130J low flow pressure regulator model, with direct action and spring diaphragm, is designed for use with clean air, nitrogen, carbon dioxide, oxygen, argon, and other gases or liquids compatible with the construction materials and design of the regulator. This regulator is specifically designed for high-purity gas systems found in pharmaceutical, cosmetic, fine chemical, and food and beverage processes. Sizes: 1/2" to 1" - DN8 to DN25 Maximum operating pressure: 16 bar Maximum operating temperature: 150°C Nominal pressure: 0.2 to 8 bar...

... position. Spindle extends via hydraulics and is set up by spring. Form B, set up by spring: Clamping spindle extended to initial position. Set up by spring. It is important to respect the permissible load forces. Follow safety instructions. Advantages: - Integrated metal scraper. - Always set up by spring. - Low profile. - Possibility of horizontal/vertical mounting. - Clamping separate or associated with the clamping process. Max. operating pressure: 500 bar. Permissible load at 500 bar: 9 kN. Min. oil pressure: 100 bar. Max. tightening torque: 60 Nm.

...This option allows the control wheel to be oriented 90° relative to the table axis for easier access if it is restricted. Different possibilities are offered to meet various installations: – Orientation towards the front face, the rear face, or the side face (right or left) – With removable or non-removable wheel (or knurled button) – With (or without) position indicator, adjustable to 0°, 90°, or 180° and 2 viewing directions It is also possible to use the return alone (without a control element) to connect 2 tables with a hexagonal bar.

...EQUIP STEP is an ideal bar screen for the entrance of wastewater treatment plants and water intake structures. The equipment consists of a stainless steel frame with a filtration area made up of fixed and movable bars. The distance between the bars represents the filtration gap. The frame is installed in a channel with an inclination angle typically of 55°. Wastewater passes through the filtration area (bars), and the screenings are captured and lifted step by step on the stairs. The waste is then ejected at the top of the equipment.

... for auxiliaries) 2 independent hydraulic motors of construction quality (2 internal bearings) Available engines: HONDA: Fuels: Unleaded 95 or 98 or E10 or clean gasoline “ASPERN” or YANMAR: Diesel HONDA GX390 (T1): 4-stroke / OHV / 13 HP / Type: QH-B1 – GCAET Electric start = starter + starter motor and battery with 10 Amp alternator for powering a halogen work light Tank = 6.1 L / Average consumption 1.5 to 2 L/H. Hydraulic flow rate: 18 L/min at 180 bar SKU:1254922 Ground contact of the tracks: 100 cm...

... hardness - 91. Compliant with UL 94V2 bis Vo (Underwriters Laboratories Inc.) Packaging: 50m Bend radius: 12 mm Temperature range: up to 80°C Max operating pressure at 20°C: -0.95 to 18 bar Fluid: Compressed air, Neutral gas, Vacuum Material: Polyurethane Outer diameter: 6 mm Inner diameter: 3.9 mm...

... chain with 27 carbide alloy knives is bolted to the robust excavation chain and can be replaced individually. The long cutting bar allows for a maximum milling depth of 60 cm. The excavated materials are transported to the side by a screw conveyor. An excavation speed of up to 60 m per hour is possible. The range of applications extends from the installation of underground cables, for example...

...Simple and reliable level probe for raw water and drinking water applications The Waterpilot FMX11 transmitter is commonly used in environmental applications for hydrostatic level measurement. It is approved for drinking water applications and can be used in wells, storage tanks, water towers, dams, monitoring stations, lakes, and rivers. Process pressure abs./Max overpressure limit: 10 bar (145 psi) Parts in contact with the product: 316L Process membrane material: Metal...