France, Mulhouse
92km
... electrostatic charges on materials such as paper, plastic, glass, fabric, wood, cardboard, etc. The ECA 88 B bars are particularly suitable when they can be installed close to the area to be treated. MAXIMUM WORKING DISTANCE: 120 mm OUTPUT TYPES: Standard: axial output Bent outputs USAGE LIMIT: 115V-60Hz: 4 meters 230V-50Hz: 8 meters DIMENSIONS: Custom-made from 50 to 6000 mm MATERIALS: Anodized aluminum body, stainless steel tips, polycarbonate insulation HIGH VOLTAGE GENERATOR: SC 04 B CONNECTIONS TO THE GENERATOR: Via shielded cable OPTIONS: Stainless steel profile Bent outputs Custom cable length...
France, Dombasle Sur Meurthe
79km
...Possible dimensions and capacities: Washed drums of 60, 120, and 220 liters approved (Non-approved drums for food contact) • With bungs (partial opening) • With full opening Characteristics: Renovation cycle: • Receipt of the packaging, weighing, then suction of residual bottoms • High-pressure external washing (200 bars at 60°C) • High-pressure internal washing + washing additive • Rinsing with rainwater and tap water • Drying • Leak test by air vacuum...
France, Patornay
151km
...The translucent disposable microwave container without a lid from PRATIPACK is primarily used by caterers, street vendors, snack bars, or even for personal use. The semi-rigid containers are ideal for holding your hot or cold dishes. The catering container has several advantages: It allows for safe transport thanks to its closure with a rim and perfect sealing, as well as easy opening due to its...
France, Kedange-Sur-Canner
155km
...Galvanized steel sheet DC 01 Am 1.5 mm • Drilling template: Galvanized steel sheet DX51D/Z275 1.00 mm • Plasterboard: GKBI board for wet rooms • Closure: Steel/plastic • Seal: EPDM lip seal • Quick-fix screws: Steel DOCUMENTS TO CONSULT Air permeability tested according to standards EN 1026: 2000-09 and EN 12207: 1999-11; test report no. 104 31394/2. PREPARATION OF SUPPORTS To be mounted on the wall and ceiling (do not walk on it). INSTALLATION ADVICE To be mounted on the wall and ceiling. Suitable for use in rooms...
France, Marnaz
208km
... Brass, copper, machining steels, stainless steel, aluminum, plastic. Cam-operated lathes, multi-spindle lathes, CNC lathes. Surface treatment, anodizing, grinding, polishing, assembly of subassemblies. From small to very large series. In bars from Ø 2 to Ø 65 mm and in billets up to Ø 150 mm on CNC lathes.
France, Fontaines Les Gres
172km
...Included washers. Metric thread EN 60423. Protection rating IP 66, IP 68 up to 15 bars, IP 69K. Tensile discharge according to EU standard 62444. EHEDG certification. Sealing gasket without animal-derived ingredients. Reference: 84100-13 Cable gland: Stainless steel 1.4404 or PVDF Hose: plastic Stainless steel cable gland: -40 °C to +85 °C Plastic cable gland: -20 °C to +85 °C Hose: -20 °C to +95 °C...
France, Brazey En Plaine
110km
...The ECOAK pallet box is reusable and recyclable. It ensures maximum hygiene thanks to its smooth walls. Its structure is reinforced by 2 metal bars located in waterproof sleeves integrated into the bottom of the pallet box and by 1 rigid plastic tube in each corner pillar. Its maximum load is 600kg and 4500kg when stacked. It can be produced in versions with feet, 2 runners, or 3 runners. Options...
France, Montréal-La-Cluse
... a tube of plastic material known as a "parison." This tube will be pinched, pre-inflated, and then blown using a blowing rod or needle. One of the advantages of our technology is the ability to optimize material distribution. MTS can distribute up to 500 different thicknesses over 1 meter of parison. ■ Phase 3: The mold closes around the parison, and the blowing process begins. The temperature of...
France, Vougy
208km
... and is also specialized in turning plastic materials. The types of materials machined include: - Steel: High carbon steel, low carbon steel, Silicon Iron, Refractory steel - Stainless steel: Ferritic, Austenitic, Martensitic - Plastics: PEEK, PTFE, PVDF, POM (Pom C and Pom H), Ertalon (PA) - Aluminum: 2011, ALECO 62Sn, 6064, 7075, ... - Copper alloys: Brass, Lead-free Brass, Bronze Certifications: -> ISO/TS 16949 since 2006 -> ISO 14001 since 2015 -> ISO 9001 V2000...
France, Simandre
166km
Poitoux is a company specialized in the design and manufacturing of furniture for professionals. We work with direct clients as well as architects and decorators in sectors such as hospitality, catering, retail, and senior residences. We create custom layouts using a variety of materials including wood, glass, metal, plastic, and leather. Our design office offers technical solutions tailored to...
France, Saint-pierre-en-faucigny
206km
Turning and machining in small and medium series. Capacity from 3 to 70 mm in bars and up to 250 mm in billets. Materials processed: steel, stainless steel, aluminum, copper, brass, plastic. Assembly and fitting of mechanical assemblies. Specific production means: 30 production machines: traditional, machining centers, CNC lathes.
France, Izernore
193km
Since 1937, Apnyl has been offering its expertise in machining bars from diameter 6 to diameter 60 on single-spindle or multi-spindle automatic lathes, and more specifically in machining bearing steels such as 100C6 or 440C in small or medium series. The machined materials include: Bar turning steels (S300-S300 Pb), Stainless steels, Brass, Aluminum, Polyamide, Polyacetal. Production of prototype...
France, Strasbourg
143km
...organizations, and administrations. We equip workshops, warehouses, factories, construction sites, offices, shops, bars and restaurants, hotels, and airports. The administrations, reception areas, and high-traffic locations, ERP as well as docks, parking lots, green spaces, roads, ...
France, Ville La Grand
191km
... aerospace sectors. The materials processed: steel, stainless steel, aluminum, brass, plastic... The dimensions: Diameter 3 to diameter 250. The quantities: from 50 pieces to 200,000 pieces per month. Our strong point: responsiveness to customer requests, pricing, and deadlines. Types of production: Adapter; Shaft; Caps; Ring; Terminal; Buttons; Stop; Spacer; Nut; Flange; Roller; Studs; Pin; Insert; Core; Piston; Plate; Block; Extender; Fittings; Screws.
France, Chevy-Sur-Marne
234km
... solutions are the foundation of our relationships with both our clients and suppliers. Our machining is performed on ferrous and non-ferrous materials such as: Steel, Stainless Steel, Brass, Titanium, Copper, Bronze, Aluminum, and Plastic.
Popular countries for this search term

The europages app is here!

Use our improved supplier search or create inquiries on the go with the new europages app.

Download in the App Store

App StoreGoogle Play