galvanized sheet metal France

...Gear Training System ideal for industry and craftsmanship, for the production of ventilation duct joints and the assembly of boxes for insulation high-quality LOCKFORMER machine max capacity galvanized steel: 0.5 / 1.2 mm working speed: 6 m/min motor power: 400 V / 50 Hz / 2.2 kW dimensions: 1,300 x 800 x 1,100 mm machine weight: 456 kg...

...Material storage can be achieved via a collection bin or a silo designed for this purpose. The material can be discharged without pressure through a rotary valve compliant with ATEX standards. This solution can be offered as a complementary option to a filtering unit (pneumatic conveyor to relocate the storage area) or as a substitute (more economical than using a filtering unit). Technical specifications: - Flow rate ranging from 500 to 40,000 m³/h. - Normal or offset inlet (better efficiency) - Made of galvanized sheet metal of 15 and 20/10th - Painting option available Brand: Aspirelec...

... various jolts, they are arranged with one composite folding plate for every three plates. Their arrangement should be staggered in relation to the other plates. Option: We can add plates with flat belts. Description Electro-galvanized sheet metal 12/10 Reinforced rubber band Counter-band in galvanized steel Flexible flanges in electro-galvanized sheet metal + spring Bolt fixation 6×16 Hexagonal head...

... (gable) 8.00 m x 5.00 m Depth (long side) Height of the bottom plate (usable height): 3.00 m Ridge height: 4.02 m Area: 40 m2 Cladding: Sandwich cladding panels 40 mm Door: 2 sliding leaves of 2 m sandwich panel Roof: Slope 21 % Covering: Galvanized and lacquered sheet metal green RAL 60 11, thickness 50/100 mm IMPORTANT: Provide 2 people to unload the truck...

...Meets hygiene and safety standards Wire floor with no dropped edges, adaptable to various types of light or heavy racks, used for light picking with cartons or plastic bins. Uniformly Distributed Load between beams (UDL). Features of metal floors WITH or WITHOUT dropped edges Mesh: 150 x 50 mm Surface treatment: electro-galvanized CR3 Reinforcements: made of profiled sheet (U) and embedded...

...Galvanized steel is a type of steel that resists corrosion by the addition of another metal, which is zinc. Indeed, a layer of zinc is placed over the steel to prevent it from being affected by rust. The use of this type of steel is resistant to moisture and abrasion. Galvanized steel can be used for any type of project: for sheds, gutters, roofing, gates... This sheet is quite suitable for...

...Contemporary city planter model Bordeaux in metal (available in many RAL colors, see here), with uprights made of steel tube measuring 50 x 30 mm, and a crossbar made of steel tube with a diameter of 42.4 mm. The trough is made of galvanized steel sheet with lifting rings for easy transport, and an integrated water reservoir. Contemporary design with grooved steel cladding. This metal urban planter is treated against corrosion through hot galvanization. Delivered as a kit to assemble.

...Canister and fixed arm vacuum cleaner - Thermomagnetic protection - The equipment is designed for the emission of purified air - Electric cleaning system - CE standards OPTIONS - 5.5 HP motor (suction capacity 6000/9000 m3/h) - Other electrical panels - Connection diameter 400 mm - Galvanized sheet metal pipes diameter 400 mm - Reduction cone for suction hood diameter 250 mm...

... on the surface of the AK does not fall under the NF certification) Kit of 3 light-emitting diode lamps Diameter: 100 mm High-performance lens LEDs L2H Nominal power: 3.2 W per lamp 1000 Cd on axis 150 Cd on the sides +/- 7.5% vertical and horizontal Housing operating with 2 non-provided 6-volt R25 batteries Connection via spiral cord Connection with Jack plug Material: Panel made of galvanized sheet metal Thickness: 1 mm Feet made of solid galvanized wire Diameter: 12 mm Handle made of unbreakable polyamide Optical lamps in orange polycarbonate Size: 1000 mm Marking...

... of galvanized sheet metal. High and low ventilation openings on both side panels, allowing static ventilation of the interior designed for heavy and light vapors. Protective stop for rear cladding. Feet for forklift passage. The cabinet is delivered in a kit with an assembly manual (simple assembly, approximately 2 hours for 2 people for 1 unit) or pre-assembled from the factory.

...Single-phase AC Motor (2TRE / 2GRE / 4TRE / 4GRE / 2GRF) • Maximum flow rate of 200 to 750 m³/h, maximum pressure of 160 to 900 Pa, • Turbine diameter from 108 to 200 mm, • Single-phase external rotor AC motor with capacitor 230V 50/60Hz and 120V 50/60Hz, • Centrifugal turbine made of galvanized sheet metal or plastic, • Plastic or black painted sheet metal volute, • CE, UL, CCC marking, • Options: special voltage, three-phase.

... extraction of clean air. FLUID TEMPERATURE: Up to 130°C. CONSTRUCTION: The casings are made of cold-galvanized steel sheet Z275 SENDZMIR 20 microns as standard supply, as well as all sheet metal components. The bearings are sealed and lifetime lubricated. OPTIONS: Suction hood, support feet, counter flanges, diffuser, flexible sleeve, protective grille, anti-vibration pads, grease fittings on the outside of the casing.

... bending techniques: TIG/MIG and MAG welding, as well as spot welding. Around their core business, industrial sheet metal work, we are your single point of contact for all your projects in stainless steel, steel, aluminum, galvanized steel, brass... Our teams are committed to providing you with a quality service that meets your expectations.

Ogier is an industrial sheet metal company specializing in sheet metal rolling. We have been serving professionals for three generations. Our technicians create prototype parts or large series in stainless steel, steel, aluminum, galvanized steel, and brass. We also produce laser-cut parts with various finishes such as galvanized steel, machining, sandblasting, and painting. We can also meet your needs for bending, MIG and TIG welding. We carry out all work based on plans, from prototypes to large series in various materials such as stainless steel, aluminum, steel, or galvanized steel.

...collectors, heat exchangers, and heating networks. Insulating materials: We use glass wool, rock wool, shells, mats, and panels. Armaflex sleeves, Polystyrene (shells and panels). Styrofoam (shells and panels). Polyurethane (shells, panels). Foamglass (shells, panels, staves). COATINGS: We use: Sheet metal: aluminum, galvanized, stainless steel, Lacquered sheet metal in various colors, PVC style Vipack, etc. Thicknesses: 6/10, 8/10, 10/10 mm - For thicker options, please consult us at: TEL/ 0695934950 MAIL/ isomer69@gmail.com.

Sheet metal for construction and industry. - Galvanized, pre-painted steel, lacquered aluminum, stainless steel in lengths of 4 meters. - Cassette, cladding, membrane, edge, curved cap (stapling). - Finishing piece for aluminum joinery. - Complex bending, precision cropping on thin sheet metal.

...steel sheet, galvanized steel sheet, stainless steel sheet, and aluminum sheet, with thicknesses ranging from 0.6 mm to 6 mm, in maximum sheet sizes of 1500 mm x 3000 mm, as well as standard commercial profiles. For air treatment and transport, ASP Technologies produces airtight ducting made of carbon steel S235JR according to EN10025-2, stainless steel 304L or 316L according to EN10088-1, and aluminum AW1050A or AW5754 intended for site equipment such as nuclear installations (CEA, EDF, AREVA), clean rooms in pharmaceuticals or microelectronics, and the food industry...

... manufacturing of tunnels, production of agricultural tarps, and custom fabrication of metal parts in tubes and galvanized sheet steel. Among our products: livestock tunnels, storage tunnels, horse shelters, pool shelters, garden greenhouses, car shelters, motorhome shelters, photovoltaic greenhouses, clips for securing tarps, professional feeding troughs...