heat treatment of metals France

...Paints and varnishes on wood present an additional challenge for their polymerization. Indeed, unlike metals, glass, or plastics that may have characteristics more or less suitable for thermal treatment, wood has the additional property of being "alive." The substrate and product can interfere irregularly and cause problems during processing. This is why the IR tunnels designed for the wood...

...COLD LASER PERMANENT MARKING Cold laser marking refers to marking and treatment carried out with minimal thermal stress. Laser beam concentration allows direct marking without generating heat into parts, avoiding any burning or deformation. This permanent marking doesn’t alter the material and is an ideal solution for identification marking on soft materials and sensitive components. ULTRA...

...fastening, lighting, dashboard, etc.). The latest technologies in machining and quality control are installed in our workshops. We are capable of providing complete processing services for transport parts in collaboration with all our industrial partners: - Surface treatment operations (zinc plating, nickel plating, painting, alodine, OAC, OAD, etc.) - Heat treatment operations (tempering / annealing / hardening) - Finishing operations: vibratory finishing / sandblasting / deburring / polishing - 100% inspection if needed...

...Sandvik, Schmolz+Bickenbach Eddy Current Testing Eddy current testing is conducted by our material suppliers. Processing Treatments We provide our clients with a comprehensive service that may include heat treatment or surface treatment. Heat Treatment for Stainless Steel: - Hyperquenching - Kolsterizing Surface Treatments for Stainless Steel: - Passivation Heat treatments and surface treatments are carried out through certified subcontractors.

... Starting from hollow blanks, our experienced team carries out tube or profile drawing according to current standards or your specifications. We rigorously select our raw material suppliers to ensure a product of the highest quality. We primarily work with non-ferrous metals such as copper and its alloys (brass and aluminum). We ensure that we always deliver a product that meets your expectations...

LCM has over 50 years of experience in metallurgy and heat treatment. We assist you in choosing new or used installations. Additionally, we can support you in your installation processes and their commissioning. LCM remains at the forefront of technology in heat treatment. Feel free to contact us for more information!

Since 1984, INFRA-THERM, a unit of the THERMI-LYON Group, has been meeting the demands of industries in the Grenoble region (automotive, leisure, electrical appliances, tooling, aerospace, textiles). INFRA-THERM is one of the last companies to master salt bath heat treatment technologies. Quality, reliability, and speed of service are ensured by a competent, available, and motivated technical...

... metals and plastics, including: - Steels: S300Pb / 11SMnPb37, 35MF6Pb / 36SMnPb14, 42CD4 / 42CrMoS4, ETG100... - Austenitic, martensitic, and ferritic stainless steels: from class 3 to class 9, as well as food-grade stainless steels - Aluminum: We machine all types of aluminum, including food-grade aluminum - Copper alloys: brass, copper, and bronze - Titanium - Plastics & nylons: nylons, polyamides, standard engineering thermoplastics, high-performance thermoplastics, transparent thermoplastics.

CARLIER SA is a service company specializing in the sale and processing of non-ferrous alloys, primarily based on: COPPER - NICKEL - TITANIUM - ZIRCONIUM...

THERMI-LOIRE, a unit of the THERMI-LYON Group, meets the demands of industries in the Saint-Étienne region: forges, gear manufacturers, toolmakers, and mechanics. THERMI-LOIRE specializes in the treatment of large parts (vacuum treatment and controlled atmosphere, press hardening, and more recently, a new low-pressure gas carburizing installation has been approved for aerospace applications in...

Precision machining company located in the Arve Valley in Haute-Savoie. Precision machining from Ø 3 mm to Ø 60 mm in small and medium series. Machining is carried out in ferrous and non-ferrous materials such as: Steel, Stainless Steel, Plastic, Nylon, Delrin, Teflon, Glass-filled... The company Sgro-Fedele is also at your disposal to carry out subcontracting operations: Bending, Grinding, Broaching, Polishing, Grinding, Heat treatment and surface treatment, Assembly of sub-assemblies. Application areas: Fastening and assembly parts, Safety parts, Adjustment parts, Inserts for rotary tools.

...The company MOREL THERMAL TREATMENT specializes in the treatment and coating of metals. It has various tools such as vacuum treatment furnaces / Dimensions: 900 x 600 x 450, which allow for: Quenching, Tempering, Annealing / Hyperquenching, Stabilization, Magnetic Annealing, Solution Treatment / Aging. It also has belt furnaces for treatments in atmosphere to perform: Quenching, Hyperquenching, Annealing, Brazing, Special Cycles. MOREL also possesses shaking furnaces for treatments in atmosphere or gas nitriding furnaces / Diameter: 700 x 1000, as well as control and measurement equipment.

The company TRAITEMENT THERMIQUE DE TERRENOIRE specializes in metal treatment: hardening, tempering, and stabilization. Shot blasting and painting of metals, thermal treatment of metals. Its offices are located in the 69 department, specifically in the city of Chassieux. It is the specialist in thermal treatment for medium and large-sized parts. TRAITEMENT THERMIQUE DE TERRENOIRE also brings its know-how and expertise in the field of shot blasting and painting through various techniques that will allow it to meet your needs.

...> Anti-corrosion coatings (painting or metallization) > Heat treatment > Cryogenic cleaning > Industrial resins for maintenance and structural repairs These are the skills we have mastered perfectly. On-site or in our workshop, our goal is to offer our clients quality services and adhere to timelines in any environment. Thanks to our large-scale facilities: > 42 tons of lifting...

CATIDOM is a specialist in surface treatment for all aluminum alloys intended for the automotive, cosmetics, sports and leisure, and mechanical industries... Since 1974, CATIDOM has been offering technical coatings aimed at anti-corrosion, wear resistance, and aesthetics such as: decorative anodizing and hard anodizing.

... dedicated to new technologies for the production of vacuum treatments and nitrocarburizing. By addressing the new requirements for cleanliness and geometric tolerance, these innovative industrial solutions have enabled numerous clients to gain a technological edge in their domestic and export markets. All equipment is connected by a supervision network that allows for continuous data acquisition as well as remote querying capabilities.

... on walls and floors - Thermal and acoustic insulation using fibrastyrène insulating panels and rock wool on walls and under high floors - Fire doors, fireproof ceilings, fireproof walls, fireproof insulators - Thermal insulation - Insulation by blowing rock wool - Insulation by fireproof spraying (fibrous and paste) - Insulation by projection - Anti-condensation treatment - Acoustic correction - Blowing rock wool in attics. Painting, tiling, floor and wall coverings, parquet, false ceilings, plumbing, electricity, waterproofing, facade renovation, roofing, renovation.

... pneumatic transport, storage silos for powdered products, and address frost and ice problems in frozen product storage. Primarily present in the sectors of food processing, pharmaceuticals, chemicals, energy, and the treatment and distribution of drinking water, our processes rely on technologies such as rotary desiccant dryers with silica gel, heat exchangers, and liquid bactericidal absorbent systems.

Located in Thiers, in the center of France, FISCHER and BARGOIN have been specializing in the manufacture of professional cutlery and sharpening steels since 1859, thus becoming one of the leaders in the field of equipment for the food industry.

...Since 1948, Fonderie ROCHE has been supporting you in the production of aluminum parts through gravity die casting. We handle your projects from A to Z: from CAD design assistance to the delivery of machined, assembled, and/or painted parts.

...machining, diamond turning, engraving, meticulous finishing, and assembly. Multi-technologies: screw machining, diamond turning, machining, finishing (tribofinishing, polishing, lacquering, engraving, grinding, heat treatment, surface treatment, assembly) Reference markets: Fluidics, Medical, Connectivity, Aeronautics, Robotics, Luxury. Materials: non-ferrous metals (brass, bronze, nickel silver…), steels (mild steels, stainless steel), aluminum, plastics (PMMA, Delrin, Teflon), and precious metals (silver).

Anoxyd specializes in surface treatment of aluminum, anodizing, tribofinishing, and deburring. Our facility is equipped with centrifuges and linear vibrators with capacities ranging from 1 liter to 1,000 liters, allowing us to meet significant and urgent demands across all target sectors.

The company SPIRAL, located in Thise near Besançon, is ISO 9001 certified and offers finishing services for parts: Heat treatment, Tribofinishing, barrel polishing, washing and degreasing, blackening and browning for the following sectors: automotive, medical, aerospace, defense, electrical equipment, watchmaking, telecommunications, and logistics.

MAILLEZ-FONDERIE specializes in the design and production of cast aluminum alloy parts in metal shell molds using gravity.

... of high-value technical parts, - Series production of 5 to 500 pieces, - Assembly of components; MACHINING OF ALL MATERIALS: - Steel, stainless steel, cast iron, aluminum, brass, bronze, copper, silver, PEEK, epoxy, POM, PVC, molybdenum, PTFE, Inconel, tantalum, Nitronic, Monel. COMPREHENSIVE SERVICES: - Heat treatment, - Surface treatment, - Grinding, - Electro-erosion, - Drilling.

The company DAMA specializes in precision turning. We also handle surface treatment, heat treatment, grinding, honing, deburring, and assembly of sub-assemblies.

... types: from the smallest with a diameter of 5 mm to the longest with a length of 3 meters. SOGRAYDIS also carries out assembly of sub-assemblies and offers complete solutions including treated parts (heat treatment or surface treatment) or painted. We handle the procurement of raw materials, their machining and painting, as well as the supply of secondary components (bearings, bolts, grease).

For over a century, SFF has been developing and producing cold forging technical parts. As a Tier 1 supplier to the automotive industry, several prestigious clients have already trusted us to assist them in this sector, which is known for being one of the most demanding in terms of cost, quality, and deadlines.

... and medium series. Monnot SA provides a comprehensive solution with its network of specialist partners: rolling, surface treatment, heat treatment, gear cutting, electro-erosion, painting, special inspections, metallurgy, from single parts to small and medium series, foundry, from single parts to small and medium series, stamping...

The THERMO-CLEAN Group cleans a wide variety of parts, from 45-ton heat exchangers to production tools used in paint shops, automotive manufacturers, and their subcontractors, soiled by paint and grease, as well as extruder parts and dirty filters from the chemical and petrochemical industries. Industrial stripping is performed using large-scale pyrolysis ovens with controlled oxygen levels...