anti corrosion France

...Rubber suspensions are components that possess, to varying degrees, both elasticity and damping properties. The flat support is an outstanding anti-vibration solution. - Vibration attenuation exceeding 90% at 1500 RPM (25 Hz) - High-performance and uniform range - Stabilized characteristics - Corrosion-resistant - Salt fog resistance (400h) - Aesthetic appeal The double rod support offers...

... stainless steel for environments requiring corrosion resistance. The wipers are made of FDA-approved thermoplastic polyurethane. The polymer bearings are Iglidur J (dry operation). The bronze rings are oil-impregnated (non-food grade). The ball bushings can be with food-grade grease (please consult us). However, these units cannot be used in direct food areas (in contact with or above food) without precautions. Model: 342X to 346X Cylinder Ø: Ø20 to Ø50 Cylinder standard (others possible): ISO 6432 and 15552 Guidance column Ø: Ø12 to Ø25 Stroke: 0 to 400 mm...

...Low load slide, 100% stroke, with disconnection and anti-corrosion finish MATERIAL - Cold-rolled zinc-coated steel rail. - Self-cleaning ball cages made of cold-rolled steel. - Precision balls made of carbon steel. - Ball cages, balls, and rivets made of stainless steel for anti-corrosion finish. USAGE - 100% stroke. - Front disconnection. - Hard stop in closed position. - Drawer height adjustment via eccentric (3.1 mm). - Recommended screw: M4. - Slides are sold in pairs. ON REQUEST - Mounting bracket.

... resist break-ins. Equipped with a steel structure and assembled by mechanical welding, the ticket booths have good corrosion resistance and ensure perfect stability. The ticket booths are created with an initial facing made of sandwich panels. To reinforce the structure and make it resistant to break-ins, the interior structure is strengthened with a protective sheet. Additionally, the lifting rings allow for the handling and quick installation of the ticket booth.

...Aluminum indium and zinc anode gross weight: 1.100 to 1.400 kg anti-corrosion Dimensions: 200x80x35mm fixing center distance 80mm Element corrosion protection...

... then be easily slid into the rails. With anti-fingerprint and anti-corrosion features, the maintenance of the components is simplified, allowing for installation in both kitchens and bathrooms. Contemporary in design, Stripes combines originality with functionality and is available in Silver, Steel Gray, and Olive Brown. Design C+B LEFEBVRE.

...Waterproof particle board covered with flame-retardant HPL laminate F1 with rounded edges RAL 7035 gray color Dismantlable construction with leveling jacks on a metal base Metal parts (hinges, stops, rails) painted for corrosion resistance Lockable closure Doors open at an angle of 110°, allowing shelves to be removed without tilting Door and drawer damping system, Connection collar diameter 125...

Walusa INGENIERIE, an Alsatian company near Mulhouse, has been designing and implementing industrial air treatment systems, surface treatment with "Ecopaint", and energy management through variable flow since 1991. We design and deliver customized, turnkey industrial installations. Ventilation, dust extraction, smoke filtration, solvents, mists, chips, "ATEX" installations... washing booths, powde...

...The composite bearing with PTFE from GGB, designed for filament winding, has been specifically developed for hydroelectric applications. The self-lubricating HPF bearing is a PTFE-loaded tape with a machinable anti-friction surface. With a high load capacity and a low coefficient of friction, the HPF filament winding bearing offers excellent resistance to shocks, angular loads, wear, and corrosion. This environmentally friendly self-lubricating bearing also exhibits good dimensional stability and does not swell upon contact with water. Contact GGB to learn more and get a free quote!

...Plastic tree-shaped pins/clips/staples are a type of rivet in the shape of a tree, ideal for quickly and easily assembling panels of various thicknesses by hand, without tools. 2 Types of products: removable and non-removable. Specifications: Anti-corrosion, rigidity, good shock and heat resistance (from -20°C to +85°C, varying depending on application), Special grades PA66, Custom grades and...

...To showcase all your information, posters, indoors and outdoors - Ideal for outdoor use, waterproof, wind-resistant Double-sided display Cadro-Clic in natural anodized aluminum, thickness 4 cm Unbreakable anti-reflective polycarbonate plexiglass protectors (PET) Base made of ultra-resistant plastic, can be weighted if necessary with water (+ 30 kg max) or fine sand (+ 45 kg max) Feet with 4 flexible springs, treated for corrosion resistance Base equipped with 2 wheels for easy movement by tilting...

...Galvanization involves coating a metal piece with a layer of zinc, which helps protect it against corrosion. This anti-corrosive technique allows you to protect your parts without altering the properties of the steel. We can perform galvanization on most metal parts (small or large, light or heavy, and in various shapes); however, please feel free to contact us so we can assess the feasibility...

...-free Anti-corrosion version available upon request: Coupling, columns, screws: Stainless steel Options: Anti-corrosion version (/AC) - Rod lock Options upon request: Special stroke - Anti-corrosion version Dimensions and load table: See PDF...

...Assembled by automatic underflow welding without rework. Thickness of the shell is 5 mm for Dn 2400 mm // 6 mm for Dn 3000. Domed bottom with a thickness of 6 mm. Color RAL 7045. Sealing is controlled and tested. Verification carried out under pressure with the issuance of a certificate. Anti-corrosion coating on the exterior and interior in two-component epoxy, an inlet connection Dn50...

...Adjustable Height Wooden Floor Wooden floor system mounted on a galvanized steel frame, designed for frequent assembly/disassembly, our floors can serve as ballast for the structure during events. The floor is mounted on a galvanized steel plate with a height adjustment system of 5.5 cm, and the perimeter is made of thermolacquered aluminum or galvanized steel. The floor is available in different materials, including plywood with anti-slip and anti-corrosion finish or pre-assembled ipe lapacho.

... for installation. The door leaf Made of solid high-density polyethylene (PE HD500), colored throughout, 15 mm thick, Reinforced with a stainless steel U-channel on the back, Soft anti-pinch finger seal with rounded edges, PMMA porthole, 15 mm thick, flush-mounted for perfect hygiene (standard round diameter 350 mm, other sizes available as options). Colors Ocean Blue Poppy Red Slate Black Pearl Grey Snow White Emerald Green Lemon Green Mimosa Yellow Types of hinges Swing hinges in Delrin with...

...Packaging unit 5 meters with an odd number of links. Termination with an inner link on both sides. Connecting links can be ordered separately. European type roller chains according to DIN ISO 606 with rounded plates (ISO No. 06 with straight plates). All chains are pre-stretched. First lubrication with anti-corrosion oil based on mineral oils. B7 = maximum value for closing links. Division = PxB1 Reference: 22200 Material: Steel Finish: pre-stretched Temperature range: -20 °C to +120 °C...

The company SDO Electro carries out all your work in: - electrostatic painting on-site at your facilities (large dimensions possible: construction machinery, trucks, tanks, all types of agricultural machinery, chassis...), - painting in our large-capacity spray booth in Chablis in the Yonne region (2 hours from Paris). - anti-corrosion painting. Our painters are ACQPA certified and can work on...

... anti-corrosion protection, and ensuring good lubrication for parts. ITEC is the exclusive representative in France for CORTEC, the global leader in anti-corrosion solutions, for FERRYL, a specialist in anti-corrosion products and maintenance solutions dedicated to the maritime sector for over 60 years, and for the specific anti-corrosion range ENVELOP PROTECTIVE COVERS, developed by SHIELD TECHNOLOGIES CORPORATION. Our teams are also present in Morocco, Algeria, and Tunisia.

...> Anti-corrosion coatings (painting or metallization) > Heat treatment > Cryogenic cleaning > Industrial resins for maintenance and structural repairs These are the skills we have mastered perfectly. On-site or in our workshop, our goal is to offer our clients quality services and adhere to timelines in any environment. Thanks to our large-scale facilities: > 42 tons of lifting...

C2M TECHNOLOGY develops its business around the laboratory and environmental sectors: It is dedicated to the marketing of all types of equipment. Based in Lorraine, a region located in the heart of Europe, C2M TECHNOLOGY can deliver worldwide and offers for all its products: Availability regardless of location, fast and impeccable order processing, all at competitive prices. Specialty: Laboratory...

... machining difficult metals). Some LUBSOL products are approved for use in the aerospace industry. 2. anti-corrosion products (complete range for all metal alloys). From temporary protection for interoperability to long-lasting protection under severe conditions. 3. lubricants intended for metal deformation (sheet metal work, pre-lubrication, bar work, wire...). These products are intended, for example, for stamping, cutting, forming, bending, stretching, and rolling operations.

LEGENI specializes in the protection of turned, machined, or cut parts. Our expertise lies in depositing metals through electrolytic or chemical means for various applications.

... GALVANOPLAST Group implements the most advanced technologies to protect metal parts against corrosion. The GALVANOPLAST Group combines innovation, quality listening, and service, and develops security solutions across 3 production sites. Due to its production capabilities, the GALVANOPLAST Group, a French leader in anti-corrosion, aims to continue positioning itself as a reference in the sector and remain a key partner for clients, equipment manufacturers, and subcontractors.

... resin floor coatings are engineered to be corrosion-resistant, explosion-proof, slip-resistant, anti-static, resistant to thermal shocks, dust-proof, waterproof, ergonomic, and decorative. As a manufacturer and installer, we offer a unique warranty on both the product and installation. We strive to respond quickly to your needs through our local service. STONHARD boasts a global presence and...

CATIDOM is a specialist in surface treatment for all aluminum alloys intended for the automotive, cosmetics, sports and leisure, and mechanical industries... Since 1974, CATIDOM has been offering technical coatings aimed at anti-corrosion, wear resistance, and aesthetics such as: decorative anodizing and hard anodizing.

...Our company is committed to solving your technical problems while optimizing economic aspects, application methods, and preserving the environment as much as possible. We can summarize our specialty and expertise in four main themes: - Anti-abrasion / anti-clogging - Anti-corrosion - Chemical attacks - Thermal insulation In addition, we offer a complete range of high-performance standard products for repair and maintenance (wear, leaks, cavitation, etc.).

... time: Ceramic tiles, Acid-resistant tiles, Slip-resistant and anti-skid tiles, Glazed tiles, Cements and mortars, Ceramic paving slabs, Corrosion-resistant ceramic pavings for the chemical and food industries and for breweries, Slip-resistant resin floor coatings, and Plastic coverings and products for construction. HÖGANÄS CERAMICS France is a subsidiary of the Swedish company HÖGANÄS, founded 130 years ago, which is an international manufacturer and distributor of industrial stoneware coatings: acid-resistant and slip-resistant tiles, acid-resistant joints, special mortars, and resins.

REVALTEC was founded in 1992 by Pascal Gille and Pierre-Luc Beul. Drawing on their many years of experience, the two co-founders developed exclusive surface treatment processes for metals. The Revasil process (nickel + silicon carbide) is applied in the refurbishment of high-performance engines, providing better wear and friction resistance. The Revalloy (chemical nickel), on the other hand, is a process that offers excellent corrosion resistance and very good wear performance (an alternative to hard chrome).

BODYCOTE is a company specialized in the heat treatment of metals. We make metal stronger, more durable, and more resistant to corrosion. We work for the automotive and industrial sectors as well as aerospace and space on a global scale.