assembly equipment France

... situations, do everything possible to ensure the success of the event. Quick, precise, and detailed quotes Assembly and disassembly in accordance with the specifications Stable team with continuous training Traveling throughout Europe Available 7 days a week...

...making it easy to adapt the deflectors to your cutter if you change combines in the meantime. Finally, assembly and disassembly are quick and straightforward. Our deflectors are strong and versatile enough to be extended and installed on other combine harvesters. The deflectors are equipped with a rubberized strip at the end of the blades, which helps clean the platforms and the channel between each platform. This design minimizes clogging and seed loss.

...Sealing, safety, cushioning, and fastening Design, prototyping tests, and production of sealing systems Complete belts with joints Doors Front, rear, and peripheral seals Sensitive edges for optical and electrical applications, pressure wave with or without control unit Anti-drag systems Windows Sliding systems Sealing and de-windowing tests Emergency handle Renovation service Re-engineering, reverse engineering, compliance Cost optimization through reduced assembly time Specific packaging...

...Axon' has designed a complete range of low loss microwave coaxial assemblies : Axowave, axolab, axospec. They are mainly used as measurement and equipment assemblies as well as for antennas. Our microwave assemblies can be integrated into hybrid harnesses Microwave coaxial assemblies offered by Axon' are FEP or PU insulated coaxial cables terminated with SMA, N or TNC connectors The main applications are as follows: measurement, base transceiver stations test equipment, antenna systems, dynamic applications such as radar Surveillance or navigation systems...

... polyethylene assembly - ear cups with foam ear pads - electret differential microphone - wideband headphones - switch with continuous or alternative function - weatherproof - male 6.35 mm jack output - high-resistance cable The connectors are variable and can be adapted to the client's requirements (e.g., jack plugs, XLR, etc.). SKU: 215100 Aircraft Departure: Wired Headset...

... assembly were already part of the DNA of the AirWay Mat Elite. Made of aluminum for its structural elements, its access ramps. Product Ref.: AWE2-180SAS3 Weight: 411 kg Interior dimensions 1 compartment: 96.5 x 176.5 x 201.5 cm Exterior dimensions 1 compartment: 102 x 180 x 211 cm Exterior dimensions 3 compartments: 305 x 180 x 211 cm Dimensions of openings: 152 x 186.5 cm...

...ICM designs and manufactures custom assembly and inspection machines, fully automated, semi-automated, or manual workstations. Our machines and systems are developed entirely according to your specifications, focusing on technical and economic optimization. ICM offers high-performance production equipment for the assembly and distribution of complex products in cleanroom conditions. ICM...

...The easily maneuverable transport carts from Sofame adapt effortlessly to various work environments and situations. SV Trolleys: Technical Specifications 2 side walls made of 2 mm thick, curved steel sheet. Frame made of 2 mm thick, curved steel sheet consisting of a lower base and an upper shelf. Surface coating with epoxy powder, cured in an oven at 180°C. Assembly with screws on threaded...

...The COMPACT 4 rapid-mount concrete plants are primarily designed for loading mixer trucks and are characterized by quick assembly and ease of transport, as they consist of a single block on a vehicle. They are equipped with planetary mixers that allow you to achieve production rates of up to 60 m³/h. Also available today is a ground aggregate loading system, which eliminates the need to construct concrete loading ramps.

... as desired - Shelving constructed and tested in accordance with current regulations and standards - Delivered in kit form, easy to assemble with assembly instructions - Basic element, individually expandable with additional components Version: Basic element Shelving version: Unilateral use External width: 1060 mm External depth: 537 mm External height: 1800 mm Actual compartment width: 1000 mm Actual compartment depth: 500 mm Load per shelving unit: 1300 kg Permissible load per shelf: 150 kg Storage level equipment: 4 x shelves, galvanized Number of levels: 4 Weight: 40 kg...

... of tracks dedicated to public works machinery; it is fully automatic. Using motorized conveyors, robots place the primary parts on the assembly line, which is equipped, among other things, with a pilgrim step and two presses. Each press is equipped with two hydraulic cylinders of 1,700 kN. On each machine, the cylinders are synchronized. The manufactured tracks are then rolled up to facilitate handling.

...Founded over 20 years ago by two professionals passionate about the machining world, ADR USINAGE specializes in the manufacturing, processing, and assembly of parts and sub-assemblies made from aluminum alloy. The team consists of 14 members, serving the electronics, automotive, ASD (Aerospace, Defense, Space), and industrial equipment or special machinery industries. Dually certified in ISO...

... sufficient. These savings are due to the high performance of the resin on a compact bed. The salt consumption is 40% lower than that of a conventional softener. Our resins are also approved by public hygiene laboratories, allowing for water consumption without additional equipment. The performance of the resin also helps reduce chlorine, bacteria, and heavy metals (copper, lead, etc.). Delivered with a complete kit of all the necessary accessories for the assembly and adjustment of the device.

...Our team of technicians is at your disposal, and upon request, one of our representatives will visit your site and become your single point of contact from the start of your equipment project until delivery. We also offer installation of your lockers by our assembly team. Don't hesitate any longer and join many satisfied customers: choose the quality of Tap France's products and services!

...Complete service, design, manufacturing, painting, assembly.

... to demand. Since it is made of aluminum, it is easy to install, lightweight, and practical. One of the scaffolding systems offers a safe, modular, durable, and cost-effective solution up to 8.4 m. Thanks to its convenient assembly device, it is installed modularly in a short time, providing a safer working environment by expanding the ground area with the feet that open sideways. With the footboards mounted on the platform, equipment cannot fall from the system during operation.

...Handling of a stack of segments. It is possible to handle smaller stacks by placing a wedge in the clamp (optional). 1 welded mechanical assembly controlling the opening and closing of 2 clamps by gravity. The clamps do not come into contact with the sides of the segments. Clamping of the upper segment on the intrados side by a central clamp operated by gravity. This device allows for an equal clamping force to be applied to all segments in the stack.

... above. The assembly of the panel in the clamp does not require any drilling that could lead to cracks in the panel. The chemical bonding of the overmolded bearings allows them to integrate with the clamp. The embossed surface prevents the bearing from adhering to the panel over time.

... precision general mechanics and machining, combined with our understanding of the specific industrial environment of each of our clients, positions us as key interlocutors. If needed, we can visit your site to assess the technical constraints of your production or control processes and actively participate in the development of your specifications. We will advise you in such a way that the specifications for assembly, assembly tooling, and control meet your objectives as effectively as possible.

...Our T filters meet the following characteristics: - Mechanically welded assembly (T + steel flanges), materials Stainless Steel or Carbon Steel - Graphite spiral gaskets - Fasteners Stainless Steel B8M or Carbon Steel B7/2H - Metal mesh screens, Stainless Steel, filtration from 50 to 800 microns reinforced with perforated Stainless Steel plate...

...Exclusive system created by MATFER that facilitates the quick and easy assembly of dessert plates, mousses, and layered opera cakes with perfectly uniform layers of 2 or 3 flavors, or even more. With its multiple possible combinations, the entire stackable frame set effectively replaces 4 traditional frames. Internal dimensions: 350 x 350 mm Height: 10 mm...

...POLY DISPENSING SYSTEMS™ offers you a very wide range of volumetric and time-pressure dosing valve systems, tanks, pumps, and pressurized cartridge holders. Ideal for assembly lines, linear production, and manufacturing processes that require high fluid autonomy and high pressure, our volumetric dosing valves can perform tens of millions of cycles without interruption, without droplet formation...

... clean and comfortable. Features and benefits: 1. Secure and patented attachment system: Optimal stability, Little to no* sub-base required (*depending on applications), No edge required. 2. Simple and quick installation: Assembly and disassembly within everyone's reach, High installation efficiency (approximately 80 m2 per person per hour), Cost-effective alternative to concrete or asphalt, Immediately usable surface.

...{"Weight (kg)":"250","Vertical walls":"Transparent plexiglass.","Width (mm)":"2500","Seating":"2 m seat for the 6 m² version.","Reference":"E06I05","Materials":"Wood","Depth (mm)":"3500","Structure":"Wooden pillar base.","Height (mm)":"2300","Roof and roof arch":"Galvanized steel.","Assembly":"Wall-mounted model (model without back wall)."}...

...Solid and stable structure The walls, doors, and the mesh roof with dimensions of 50 x 50 x 4.8 mm Lockable double doors with dimensions Width x Height of 2160 x 1985 mm equipped with a handle and a lock. Designed for ground anchoring Simple modular system to assemble with assembly instructions. Length (mm): 2450 Depth (mm): 1595 Height (mm): 2100 Weight (kg): 259 Finish: hot-dip galvanized...

...•CMU 5.5 T •All stainless steel welded assembly •Calculation note •NORISKO control •Self-braking directional axle Geco manufactures all types of handling trailers. For the transfer of bulky or very heavy products, our rolling chassis and industrial trailers can be towed by a forklift or a push-pull towbar. Our handling trailers are robust and maneuverable, making them the ideal tool for transporting large and heavy parts or those requiring careful handling.

... of galvanized sheet metal. High and low ventilation openings on both side panels, allowing static ventilation of the interior designed for heavy and light vapors. Protective stop for rear cladding. Feet for forklift passage. The cabinet is delivered in a kit with an assembly manual (simple assembly, approximately 2 hours for 2 people for 1 unit) or pre-assembled from the factory.

...The EP 200 press is designed for Research and Development services and universities. It allows for the production of small batches and the fine-tuning of production parameters during industrial scaling. This press, with a fully GMP-compliant design and compact footprint, is equipped with removable panels, enabling quick assembly and disassembly of components. It features a touchscreen for easy and ergonomic control, along with a double-blade forced feeding system for optimal powder distribution.

...4 attachment points Easy assembly and disassembly. Ref: KADRA-80X60-J Useful dimensions: 800 x 800 x 600 mm Finish: Painted Yellow (RAL 1028) Volume: 0.5 m3...