air unit Belgium

...Production unit combined with a storage unit. Production 900 kg per 24/h. Air-cooled condenser. System with refrigerant cylinder and scraper (continuous production). Ice at very low temperatures of 5 °C to 10 °C. Tropicalized hermetic unit ambient temperature + 43 °C Refrigerant expansion R404a or R452a via capillary. Made of stainless steel AISI 304. Device built in compliance with current...

... immediate results (within 20 minutes max) and once deployed maintains integrity of the air quality at all times. The life-time of the high efficiency particulate air filter inside the unit is therefore largely extended. The prefilters are supplied in packages and are easily changed.

...This mobile cooler consists of an indoor and an outdoor unit. The outdoor unit dissipates heat and condensate and can be placed on the roof, against an exterior wall, or simply on the ground. The indoor unit is placed in the space to be cooled. Both units are connected by a flexible hose set with lengths of 5m, 10m, or 20m. Cooling capacity: 6.7 kW Airflow: 1500 m³/h Power supply: 230V/1Ph/50Hz...

...Pulsotronic metal particle extractors come in a 450x450 mm housing. The extractor integrates directly with the suction feed system (pulsed air). Its design makes it independent of variations in speed, flow rate, density, and material size. The sealing of the entire unit is maintained during the evacuation of metal-contaminated material. Diameter of passage: from 38 to 70 mm Sensitivity: from 0.3...

... for a maximum pressure of 40 bars. The installation of a booster should consist of at least one RS-M booster unit and a base RS compressor downstream operating at 6 to 14 bars in the first compression stage. This ensures a flow rate at least equal to the output of the booster. Additionally, it is highly recommended to plan for ...

...-regulated components and heat pipe technology Longer service life of the components inside the enclosure and the cooling unit due to component-friendly cooling Intuitive operation due to touch display and intelligent interfaces SK Blue e+ cooling unit, wall-mounted, outdoor, 1.6 kW, 110 – 240 V, 1~, 380 – 480 V, 3~, 50 – 60 Hz, aluminium, WHD: 400 x 950 x 310 mm Material:Aluminium AlMg3 Surface...

...CO2 filling device or R744 filling unit for air conditioning systems MERCEDES, (and soon also the VW-AUDI group) will use R744 (CO2) as a refrigerant for air conditioning in certain vehicle models in the future. These systems operate at very high pressures between 80 bar and 130 bar. AVL, as the world's largest specialist in engine development, has developed the CO2 service device ADS310 in close...

...The STR-1-15L22 is a transformer fan speed controller with which you can manually regulate the fan speed of single-phase motors in 5 steps. The unit also has an off-position. It needs a 230 VAC/50-60 Hz supply voltage and has an unregulated output of 230 VAC that can control a damper, an external status indicator, etc. This output is active as soon as the motor is enabled. The sinusoidal...

... request, gusseted and block-shaped packages. The long sealing time achieved through box motion technology guarantees an airtight seal. Technical specifications: GSP 65 EVO Speed: up to 60-70 bags/minute Machine dimensions: 5200 x 1350 x 1700 mm Machine weight: 950 kg Compressed air: 7 bar Power: 5 kW...

... your requirements. Hydrant carts for aircraft refuelling. 2-axle unit For JET FUEL only. Stationary air side unit with tow bar, can be moved by electric mover or towed by a car. Electrically powered through solar panels and battery pack. No fuel pump, operates like a hydrant dispenser. Fuel pressure from the hydrant system is stored and used as control pressure. Various flow rates 200 – 1200 l/min through DN50 reel hose. Various meter options (Alfons Haar, Liquid Controls, SATAM, ISOIL, …) Various filtration options (Faudi Aviation, Parker-Velcon, Facet Filtration Group)...

... allow selection for: a wide range of air volumes from 1000 to 45000 m³/h per unit, treat gas from ambient temperature to 200°C, , remove particulates load up to 30 grams/Nm3, ensuring emission efficiency up to 5 mg/Nm3...

...environmental control systems (ECS) or auxiliary power unit (APU). Actran TM is also used for non aerospace applications like computer cooling system noise and more. Actran TM can be complemented by Actran DGM to solve problems involving complex shear layers and flow gradients occurring at the engine exhaust. Model courtesy of Alenia Aermacchi™ Target Applications: Aircraft engine noise, including nacelle design Ducted cooling systems (electronic devices) Blower systems (air conditioning modules) Helicopter turbine noise...

...Electro Permanent Magnet for lifting of Steel Plates, Cutted Pieces, Mechanical Parts, Rounds, ... Integrated Long Life Rechargeable Battery + Charger (230V/50Hz) Control unit with LED push-buttons. Radio Remote Control ALD-switch against accidental demagnetisation in the Air. Protection Bar. SWL-flat:2000 kg SWL-round:1000 kg Safety factor:3...

... machines; and commercial tractors. The V-Twin cylinder design ensures optimal mixing is maintained for increased power across the rev range; reduced harmful exhaust emissions; and an ultra-smooth idle. Pressure lubrication and industrial-grade air filtration work to optimize engine life. 23 hp Briggs & Stratton Vanguard Twin Cylinder Engine for maximum power, performance, and assured reliability. Foot-controlled acceleration allows both...

The company Alitech was founded in 1989 by the Van der Maelen brothers. Over the years, the once small company has grown into a well-known name throughout Belgium. The specializations have also expanded to encompass the entire HVAC (Heating, ventilation, air conditioning, environmental technology, and electricity) sector. Now, more than 16 years later, we are already working with 10 workers and 1 employee.

Jokri: your reliable partner in air conditioning and cooling technology Since 1997, our company has specialized in the supply and installation of heat pumps, air conditioning, and cooling and ventilation systems. We offer you a complete service, a guarantee of the highest quality, and an extremely professional and precise installation. Additionally, Jokri prides itself on its impeccable after-sales service in the area of maintenance and repair.

Multicalor is the result of years of research in heating, ventilation, and air conditioning. Thanks to the latest technologies, our system combines heating comfort with a healthier and more pleasant life.

Maintenance and service of central heating. Maintenance of oil boilers, gas boilers, condensing boilers, water heaters, air heating, and air conditioning.

...Frigo Noël & David has over 45 years of experience in professional refrigeration and freezing installations. A few years ago, the range expanded to include heat pumps for air conditioning and heating. We closely monitor all developments in these fields and offer our customers the most modern installations. Active throughout the country The company was founded in the 1970s by Noël Petit. A few...

We are a rental company that provides solutions in climate engineering. Chilled water units, air treatment units, air conditioners, ice machines, boilers, heat guns, dehumidifiers... make up a diverse fleet of machines. Colors Production has equipment for producing hot water as well as generators for hot air of all capacities. These devices operate either on electricity, fuel, or gas, depending...

Adri-Cool is a Belgian refrigeration company. For over 30 years, our name has been synonymous with reliability in commercial and industrial cooling and air conditioning. Our customers appreciate quality, punctuality, and perfect service.

... ventilation unit and access doors) - cabling works - installation of the supporting air hall with ventilation unit and emergency system (see video) - access doors (Nolting brochure (pdf)) - lighting and electrical works (SILL brochure (pdf)) Paving works (driveways, parking lots, terraces, garden paths): - breaking up and removing concrete, asphalt, or existing paving with a jackhammer or...

• Medical gas and technical installations • Equipment for hospitals and laboratories • Medical instruments • Maintenance and intervention services • Sale and repair of instruments for oxygen therapy • Compressor, air treatment chain, and vacuum unit.

... booth for passenger cars - Garmat brand spray booth for vans - Infrared dryer - Spot welding machine - Tig dent puller - Air conditioning unit - And the necessary hand tools We have an informex calculation system for assessing the damage to your vehicle. This system is recognized by insurance companies.

... effective against pollen, mold, yeast, dust, allergens, and odors. In light of the coronavirus pandemic, we are now helping businesses reopen safely for employees and customers. The unit can operate independently or can be set to 3 different speeds to purify between 300-560 m3 of air per hour; the UVC light inside the unit continuously acts on the filter, thereby destroying potential harmful...

Installation of sanitary systems, plumbing.

Wholesale and retail heating and central heating materials. With us, you will find all the well-known brands under one roof, at net wholesale prices. Thanks to our years of experience and contacts in the heating industry, we can offer well-known brands such as Vaillant, Bulex, Superia, Jaga, etc., with discounts of up to 50% and more. We do not invest in an expensive showroom, a large staff, or...

A.V.K. Service was established in 1999. We have our own study department that takes care of the design, calculation, and further development of the project all the way through to its execution.