Temperature gauges TB8

Sheathing thermocouples can be used anywhere due to their ruggedness and small design. Whether in industry, development or in the lab. The measurement point comes insulated as standard to exclude any falsification of the measurement evaluation through superposition of the offsets. The connection lead permits simple routing up to the measured-data acquisition. Options are available for the probe diameter and wire length as well as the type of connection configuration (plug, socket, bare wire ends, etc.). Temperature range: -100 °C to +260 °C, continuous Wire type: Teflon with CU shielding, Tmax: +200 °C, continuous

Ex Thermostat - the Thermostat serves for limiting, monitoring or control of room temperatures, medium or surface temperatures within hazardous areas of categories 2 or 3. Type ExTR60E-50 Standard Ex Thermostat with temperature range -20 ... +50°C, adjustable with knob, current rating 16A. Type ExTR60D-50 Standard Ex Thermostat with temperature range -20 ... +50°C, adjustable with screw, current rating 16A. Type ExTR60D05/10/15 With fixed temperature 5 / 10 / 15°C - for simple control of the room temperature (e.g. frost protection) in explosion hazardous areas. Design with fix mounted 2m connection cable.

Temperature is one of the most measured physical parameters. Despite this, precise temperature measurement is one of the most difficult tasks in motor technology. To meet the constantly increasing requirements for improved motor performance, higher efficiency and reduced emissions, it is necessary to use reliable and precise sensors in modern motor control systems. The increased requirements over the last few years regarding measurement accuracy and reliability of temperature measurements has meant that many equipment operators must reconsider the suitability and performance capacity of their temperature measurement equipment. Resistant thermometers can be used between -200 °C and +850 °C. An important common property is that their output parameters are available in the form of electric signals that can be relatively easily transferred to measurement and control instruments for processing, storage and display.

Type K 1.5mm (0.05in) ⌀ mineral insulated for all general furnace profiling applications Nicrobel sheath protects against electrical noise and furnace atmosphere Type K 3.0mm (0.1in) ⌀ mineral insulated for high-temp steel reheat applications Larger ⌀ less prone to shunt errors, while retaining flexibility for setup Type K “Nextel” insulated, best for low-temp applications or where fast response from open junction is needed No resistance to furnace atmosphere or electrical noise Type N 2.0mm (0.07in) ⌀ mineral insulated for furnace survey applications (TUS compliant with AMS 2750D) Calibration services for AMS 2750 and CQI-9 requirements Less susceptible to oxidation, possible re-use Type K high-temp glass fiber insulated probes for auto windscreen forming applications Used with CS2035 probe kit Type K heavy-duty PTFE insulated probes For use with pressure thermal barrier in ‘wet’ or dry autoclave applications