Nova HC 17037 reduces the heating process cost because it is a water-soluble product. The coating effect of the product has a positive effect on the permanence of the essence in the recipe. Imparts a super soft and smooth hand, giving a slippery effect. Nova HC 17037 can be used for all natural and synthetic fiber mixtures, and is effective on a variety of woven or knit fabrics whether prepared by ring or opened spun yarns. Soft, silky handle High surface smoothness Protects the fabric against fastness Improves wash and wear properties Provides a positive effect on the permanence of the essence You can add 2-5% to your recipe. The addition rate may vary depending on your recipe. After adding Nova HC 17037 to the application, you can adjust the pH with acetic acid. Dry at 140°C for 3-4 minutes.
LATRO KIMYA DIS TIC A.S.
Turkey
Maxant® PWR is a silicone antifoam emulsion which offers excellent knockdown and durability. It is highly effective even at low level of usage. Maxant® PWR is stable in high acidic and alkaline formulations. It can be used in clear products. Recommended usage level for Maxant® PWR is 0,01- 0,5 %. A very good conditioning agent especially when formulated into; Clear liquid laundry detergent Liquid dishwashing detergent Glass cleaners Fabric softeners General purpose cleaners Permanent foam cut off Rapid foam knock-down Foam inhibition in extreme temperatures (up to 95 °C) Long term foam inhibition Compatibility with wetting agents Ease in forming dispersions in all foaming systems Ease in forming dispersions in hard Long durability in acidic and alkaline conditions Can be used in clear formulations
Request for a quoteLATRO KIMYA DIS TIC A.S.
Turkey
Texamin® EM 45 can be used for all natural and synthetic fiber mixtures, gives a great slipperiness effect to the fabric. Silky smoothness Excellent silky touch Brighter and gloss to the fabric High washing fastness Easily preparation Low yellowing Easy to emulsify High Ph Temperature stability Optical and resin strength Effective in low dosage Preparation of the end use product in order to prepare 100kg product, 30 – 70Kg Texamin® EM 45 taken into tank and mixed at 40 circulations, 15 minutes. A sample is taken and the properties are tested.
Request for a quoteLATRO KIMYA DIS TIC A.S.
Turkey
Maxant® CLEAR is a highly potent silicone antifoam emulsion. It offers excellent foam control and high stability in various foaming systems. Maxant® CLEAR is stable under extreme conditions such high temperature and competitively low concentrations. The low surface tension of the Maxant® CLEAR droplets enables the silicone to persistently flow into adjacent foam films and continue to break them down, minimizing the reapplication of the antifoam, potentially saving processing time. Permanent foam cut off Rapid foam knock-down Foam inhibition in extreme temperatures Long term foam inhibition Compatibility with wetting agents Ease in forming dispersions in all foaming systems Ease in forming dispersions in hard water Long durability in acidic and alkaline conditions Outstanding durability at low add on levels Excellent foam control Stays clear in different wetting formulations Maxant® CLEAR is mainly designed for preventing foam in process applications.
Request for a quoteLATRO KIMYA DIS TIC A.S.
Turkey
HyperTEX® Repellix is 2 component silicone elastomer which is addition curing system. It is suitable for direct printing by adding HyperTEX® Active Catalyst into the silicone. No solvent Good adhesion on fabric No color changes after curing Excellent washing durability Suitable viscosity for printing Excellent silky touch effect High and low heat resistance Good elongation Excellent cracking resistance HyperTEX® Repellix silicone is mixed with HyperTEX® Active Catalyst at recommended mixing ratio. (100:1-100:3) After catalyst is added in silicone, curing starts. Curing time can be accelerated with high temperatures. . The amount of catalyst can be changed depending on the applied temperature. HyperTEX® Active Retarder can be used to extend screen open time in extreme climates. Pallets should be preheated to 60°C before printing to produce best results. Recommended curing temperature is below 140°C.
Request for a quote