France
Manufacturer/ Producer
NORELEM FRANCE
France
Industrial shock absorbers are maintenance-free, ready to install hydraulic components. They have an integrated fixed stop. The adjustable version enables precise adjustment to the desired dampening level. After installation, operate and adjust the shock absorber a few times until the desired braking level is achieved. Exceeding the max. energy intake per hour is possible if temporarily disconnected or the shock absorber is cooled with cylinder exhaust air. The installation position is arbitrary.
Request for a quoteNORELEM FRANCE
France
Grade 10. Plasticcoated, red. Latch forged and electro zincplated. Slip hooks with forged latch. The hooks correspond to the Machinery Directive and are BG certified (H stamp). Temperature range From 40°C to 200°C = 100% permissible load Up to 300°C = 90% permissible load Up to 400°C = 75% permissible load
Request for a quoteNORELEM FRANCE
France
Fitted with smoothrunning plain bearings. Not suitable for swivelling while under load. When lifting the load, the safety latch closes automatically and is securely locked by a locking mechanism at the rear of the hook. To open the latch, the locking mechanism must be unlocked manually. The swivel hooks correspond to the Machinery Directive and are BG certified (H stamp). Temperature range From 40°C to 200°C = 100% permissible load Up to 300°C = 90% permissible load Up to 400°C = 75% permissible load
Request for a quoteNORELEM FRANCE
France
Round sling hooks for quick suspension of textile lifting equipment such as hoist belts or round slings. The round sling hook is fitted with a robust, forged safety latch. All edges are rounded to protect the textile slings. The colour of the round sling hook corresponds to the colour code assigned to textile lifting equipment that signifies the permissible loads. The round sling hooks correspond to the Machinery Directive and are BG certified (H stamp). Temperature range From 40°C to 200°C = 100% permissible load Up to 300°C = 90% permissible load Up to 400°C = 75% permissible load
Request for a quoteNORELEM FRANCE
France
The round slings comply with DIN EN 14922. They are made of highstrength endless polyester fibre cords. These polyester fibre cords are protected by a sturdy and seamlessly woven polyester sleeve. This sleeve surface is also impregnated with polyurethane to make it abrasionproof. The working load limit (WLL) and the cord tonnage (tonne capacity per cord) are either woven into or printed on the protective sleeve of the sling. The safety label with the CE mark and technical data is firmly sewn onto the sling. The colour of the round sling corresponds to the colour code scheme for load capacities of textile type slings. These round slings have high UV resistance and low moisture absorption. These round slings carry the CE mark according to the European machinery directive.
Request for a quoteNORELEM FRANCE
France
The lifting slings correspond to DIN EN 14921. The are made of highstrength polyester straps. The sling surface is also impregnated with polyurethane to make it abrasionproof. The working load limit (WLL) and the cord tonnage (tonne capacity per cord) are either woven into or printed on the sling. The safety label with the CE mark and technical data is firmly sewn to the sling. The colour of the sling corresponds to the colour code scheme for load capacities of textile type slings. The lifting slings have high UV resistance and low moisture absorption. Safety factor 71 Example WLL 1000kg = break load 7000kg. These lifting slings carry the CE mark according to the European machinery directive. The stated WLL applies to a vertical lift. By a basket lift the WLL is doubled.
Request for a quoteNORELEM FRANCE
France
From diameter D1 over 15 mm size increases are 0.5 mm. 1) Chamfer for insert
Request for a quoteNORELEM FRANCE
France
From diameter D1 over 15 mm size increases are 0.5 mm.
Request for a quoteNORELEM FRANCE
France
Hardened to 780 ±40 HV 10 and ground. Without leadin groove. Note All bushes have the bore size marked on the upper face, e.g. 10. Diameters D1 over 15 mm increase in size by 0.5 mm. Dowels or coiled spring pins together with DIN 1731 flathead screws can be used in place of the stop pin.
Request for a quoteNORELEM FRANCE
France
Unshielded system. The magnets can be mounted by pressfit or gluing. 1) magnetic face
Request for a quoteManufacturer/ Producer
5 RUE DES LIBELLULES
10280 Fontaines Les Gres - France