Inert UV-LED chamber BSL-01
Irradiation Chamber
Description
By modern UV LED technology, the chamber BSL-01 reaches a high irradiance of up to 800 mW/cm². Despite its compact dimensions, the UV LED chamber BSL-01i reaches a 80-fold irradiance compared to our classical irradiation chambers. As a compact tabletop unit, the BSL-01i is perfectly suitable for laboratories and manufactory. For different applications, the wavelengths 365 nm, 385 nm, 395 nm, 405 nm and 450 nm are available. Optionally, two wavelengths can be controlled separately. This means that the irradiation chamber can be perfectly adapted to the photoinitiator‘s requirements and is ideal for laboratory use or product changes. A nearly airtight design with separate gas inlets and outlets allow irradiations under inert conditions. For this purpose, we recommend using nitrogen as a scavenging gas with a slight overpressure. The measurement of the O2 concentration can be optionally performed at the rear gas outlet for this purpose.
- Laboratory equipment and instruments
- led chamber
- led technology
- Inert irradtiations
Product characteristics
- Interior chamber
- 20 x 20 x 20 cm
- Dimensions, chamber
- 35 x 27 x 45 cm (B x T x H)
- Weight
- ~ 20 kg
- Power consumption
- 200 W - 650 W
- Mains
- 100 - 240 V, 50/60 Hz
- Operation temperature
- 10 to 40 °C
- Storage temperature
- -10 to 60 °C
- Humidity
- < 80% non-condensing
- Cooling
- air cooling
Documents
Similar products from OPSYTEC DR. GRÖBEL GMBH
OPSYTEC DR. GRÖBEL GMBH
Germany
The UV LED chamber BSL-04 is the largest irradiation chamber in the BSL series. The high irradiance combined with the exact dose control offers a unique reproducibility for perfect results! The wavelengths 365 nm, 385 nm, 395 nm, 405 nm and 450 nm are available for your application. Due to the irradiance of up to 110 mW/cm² and the high homogeneity, even very large parts or batches can be irradiated. For high irradiances, the UV LED chamber can be ordered completely with one LED wavelength. A particularly flexible application is possible when two separately controllable LED wavelengths are ordered. Compared with our irradiation chambers of the BS series, the BSL-04 offers an irradiance that is 14 times as high. The high irradiance allows for extremely short exposure times. With the high homogeneity of the irradiation, the samples can also be positioned as needed.
OPSYTEC DR. GRÖBEL GMBH
Germany
With the UV LED chamber BSL-02, we offer you a versatile irradiance chamber on a basis of high quality UV LEDs. The most common UV curing adhesives can be applied, due to the high irradiance of 400 mW/cm². Compared to our irradiance chambers of the series BS, the series BSL-02 offers the 40-fold irradiance. In addition, the high irradiance allows for very short exposure times. With the typical UV LED characteristics like „Instant-Start“, the dimmability and the long service life, the BSL-02 is ideal for laboratory tests and the manual production. The irradiance is adjustable from 2% to 100%. The integrated timer controls the irradiance precisely. For even better results, we recommend one of our calibrated UVA+ sensors. The dose control is already integrated in the UV-MAT Touch and UV-MAT control units in the BSL-02 UV LED chamber.
OPSYTEC DR. GRÖBEL GMBH
Germany
The UV LED chamber BSL-03 is the second largest irradiation chamber in the BSL series. The high irradiance combined with the exact dose control offers a unique reproducibility for perfect results! Due to the irradiance of up to 220 mW/cm², it is possible to use the most common UV curing adhesives or lacquers. For high irradiances, the UV LED chamber can be ordered completely with one LED wavelength. A particularly flexible application is possible when two separately controllable LED wavelengths are ordered. Compared with our irradiation chambers of the BS series, the BSL-03 offers an irradiance that is 22 times as high. The high irradiance allows for extremely short exposure times. With the high homogeneity of the irradiation, the samples can also be positioned as needed. Due to the typical characteristics for UV LEDs, such as “immediate start”, the dimmability and the high durability, the BSL-03 is ideally suited for medium-sized laboratory tests and curing of large components.
OPSYTEC DR. GRÖBEL GMBH
Germany
The irradiation chamber BSH-02 is a high-powered UVC chamber with superior irradiance of 85 mW/cm². Like all BS irradiation chambers, the BSH-02 offers time- or dose-controlled irradiation of samples with UV light. The chamber is fully equipped with ozone-free UVC amalgam lamps with a total lamp power of 750 W. Compared to our standard BS series, the BSH-02 offers irradiance that is 750% higher. Thus, the irradiance is high enough for high-energy applications or UV curing. The BSH-02 has compact outer dimensions and the interior irradiation chamber has a base area of 46 x 32 cm and a height of 25 cm. The sample chamber operating temperature is about 45°C so that thermal damage to the specimen is minimized. Due to the high uniformity of the irradiation, the samples may be positioned in any order.