Elliptic Ceramic Reflectors for Lamp-pumped Solid-state Lase

BAB192 (TCT97, BAB349), BAB275, BAB330 Ceramic Reflectors are Single Lamp & Single Rod, the external shapes are Round. Ceramic Reflector is made of high purity porous alumina ceramic of 99% Al2O3 content, used extensively for long-life laser reflectors. This material is sintered at high temperatures to achieve a controlled porosity. INNOVACRA supplies ceramic reflectors for Lamp-pumped Solid-state Lasers, Diode-pumped Solid-state Lasers, and Beauty and IPL Applications. Here is our catalog for your reference. If you’re interested, please don’t hesitate to contact us for drawings and quotations.

The material of ceramic reflector is 99% Al2O3.Its green body is fired at a suitable temperature to retain the proper porosity and strength. The surface of the ceramic reflector is coated with a high reflectivity ceramic glaze ,so compared with the gold-plated reflector , its has long service life and diffuse reflection. Prime Features: - Surfaces can be sealed and coated with a solarization-resistant glaze to give high bulk refectivity - 98% reflectance efficiency at 600-1000nm - Reflectance efficiency exceeds 96% across the wavelength range 400-1200nm (see curve) - Controlled porosity, Good thermal conductivity, High electrical resistivity. Physical Characteristics: - Color: White - Density: 3.1Mg/m^3 - Porosity: 22% - Flexural strength: 170Mpa - Coefficient of thermal expansion: 7.9×10^-6--/С (200～500℃) 9×10^-6/С (200～1000℃)

Mo Mn Ceramic Feedthrough Ceramic Vacuum Electrodes The Ceramic Surfaces for Brazing, the surface must be metallized. Compare to Glass seal, Ceramic seal has exceptional resistance to thermal and mechanical shock as well as corrosion. While it requires more complex manufacturing processes and sophisticated engineering, the price is obviously higher. Advantages of Ceramic-to-Metal Seals * More solid, durable hermetic seal and better electrical insulation * Used for more harsh conditions, such as high and low (cryogenic) temperature, corrosive, high pressure, and high vacuum environments * High mechanical strength, less fracture when applied to high vibration and high g-load conditions * Shows strong bond and an excellent seal with metals and alloys, such as copper and Cu alloys (CuNi) and to nickel and Ni alloys.

INNOVACERA® Ceramic hot surface igniters for pellet boilers only need approx. 1/10 of the energy of that needed by hot air fans and ignition blowers. Their ignition capacity lies between 120 and 350 W. Depending on the positioning of the ignition element in the boiler, the ignition time of approx. 60 seconds is extremely short. This also means minimal emissions. Specification: Voltage: 120V / 230V Power: 150W / 170W / 200W / 230W Tube Size: OD10.5 × ID6.5 × L78 mm Supporting Socket: NO.7 Lead wire: 300mm / 400mm / 500mm / 900mm (Customized is accept) Range of temperature: 800~1100 °C Applications: Kerosene fan heater Wood pellet, wood chips stove or boiler Small scale biomass industrial furnace ignition Incense burner