Digital PLC UV SENSORS & VIS SENSORS

The PLC UV sensors and VIS sensors serve as precision sensors for the measurement of UV irradiances and illuminances in systems with programmable logic controllers (PLCs). Spectral range, measuring range, operating voltage, and output signal can be selected to match the measurement task and the PLC. The integrated electronics generate a signal voltage that is transmitted with the low interference cable to the PLC. The built-in diffusers provide the required cosine correction. The sensors are calibrated with traceability to the PTB (Physikalisch Technische Bundesanstalt, the German national test authority); after being calibrated, they are shipped with a factory calibration certificate. Excellent long-term stability is achieved through the use of appropriate materials. Of course, a repair and spare parts service is available for many years. Our product range includes eight spectral ranges and three measuring ranges for the sensors.

The UV inline sensor FLT is a compact, and precise measuring system for irradiance measurements in UV facilities, as packaging systems disinfection systems systems for surface activation UV curing systems Aging & test chambers The system consists of a compact inline sensor for fixed installation or use with radiometer RMD / RM-12. Reference measurements are simple and precise due to indentical shape of both sensor versions. Our product range includes eight spectral ranges and four measuring ranges for the sensors. This allows the radiometric sensors to be optimally adapted for the application. The sensors are calibrated with traceability to PTB (Physikalisch Technische Bundesanstalt, the German national test authority); after being calibrated, they are supplied with a factory calibration certificate. The RMD is characterized by a very high resolution, a high measuring range, a data interface and the illuminated graphic display.

For adhesive bonding and curing through UV radiation, LED spotlights and gas discharge lamps with liquid light guides, whose high irradiance enables curing and polymerization within seconds, are used. Exact measurements in order to monitor the irradiance and dose are required for the process control. Here, the UV sensor is exposed to the high irradiances and temperatures, which could lead to an impairment of the measurement results. The sensor series XT („eXtrem Temperature“) has been developed for this critical application. The XT sensors are suitable for up to 50.000 mW/cm² and operating temperatures of 150°C. At the same time, the XT sensors are compact and thus flexibly usable where needed. This is possible due to the separation of sensor-head and sensor-electronics. The XT sensor with its excellent cosine correction guides the light through a light guide into the calibrated sensor-electronic, which is integrated in the handpiece.

The water pressure-proof UVC-SE sensors serve as robust, long-term stable measuring heads for the precise measurement of UV-C irradiances of low-pressure mercury lamps and amalgam lamps in water disinfection and wastewater systems. The sensor can be exposed to pressure of up to 10 bar. A long-term, stable high-sensitivity photo diode with a large active area of 1 cm² is used. This provides low noise and improved sensitivity, below 260 nm, compared to SIC sensors. Superior corrosion resistance and long-term stability is also achieved through the use of appropriate materials. No aging is determined over a period of one year. The sensors are calibrated with traceability to the PTB, the German national test authority. The integrated electronics produce a signal voltage that is transmitted to the PLC or panel meter RM-32, so that inferences are minimized. Operating voltage and output signal can be selected to match the measurement task or PLC interfaces.