Fluid Hydro : Water-repellent additive for concretes, plasters and mortars
Fluid Hydro : Water-repellent additive for concretes, plasters and mortarsFluid Hydro : Water-repellent additive for concretes, plasters and mortarsFluid Hydro : Water-repellent additive for concretes, plasters and mortars

Fluid Hydro : Water-repellent additive for concretes, plasters and mortars

Fluid Hydro Fluid Hydro is a special aqueous emulsion additivated with white water-repellent products consisting of active components with an alkyl-silane base. The main characteristic is the property of reducing water permeability in concretes, plasters and mortars both due to the capillarity and lashings of water. Fluid Hydro exerts a water-repellent action as the water-repellent particles disperse evenly during the mixing phase of the conglomerate. The action of Fluid Hydro is not affected over time given that the individual particles are insoluble in water and durable in aggressive environments (alkaline, sulphatic water, chlorinated water). Fluid Hydro is recommended in the production of concrete and mortar to reduce water permeability. In plasters or mortars, it is mainly used for outdoor purposes as it greatly reduces the phenomenon of efflorescence and the biological proliferation of mould and moss. Fluid Hydro is suitable for all types of concretes, plasters and mortars, used individually or in combination with other Azichem products, to be added separately. Dispersing the product in the water of the mixture before going into the mixer is recommended. Fluid Hydro is dosed at about 0.5% of the weight of the binder. In any case, it is advisable to create test mixtures to establish the ideal Fluid Hydro dosage. Fluid Hydro should be stored at temperatures above 5° C and mixed before use. Given the water-repellent characteristics conferred to the mass of the mixture, it is not recommended to use for prestressed works. From 0.1 to 1.0 kilogram of Fluid Hydro every 100 kilograms of hydraulic binder present in the mixture (cement and/or hydraulic lime); an average of 350–500 grams to achieve good water repellency. Dilute 1:10 with water for use as a surface treatment of porous supports. The dosage varies according to the porosity of the substrate. The solution must be applied in 2 - 3 "coats" to obtain the best effect. Packaging: 10 kg canister Unit of Measure: €/kg
Similar products
1/15
Fluid Tix : Multipurpose thixotropic additive anti-shrinking
Fluid Tix : Multipurpose thixotropic additive anti-shrinking
Fluid tix A polyvalent powder additive to add to mixtures of binders and aggregates for packaging plasters, mortars, concrete and thixotropic concret...
IT-46044 Goito
Fluid S : Superlubricating additive for concrete, mortar and grout mixing
Fluid S : Superlubricating additive for concrete, mortar and grout mixing
Fluid S Superlubricating additive, defoamer, in aqueous solution, for concrete, mortars and grouts, either with cement or lime. Particularly suitable...
IT-46044 Goito
Syntech HAG Flex : Hydro-expansive, flexible, injectable polyurethane resin, without solvents
Syntech HAG Flex : Hydro-expansive, flexible, injectable polyurethane resin, without solvents
Syntech HAG Flex Mono-component semi-flexible, expanding (increases its initial volume of about 10 times) polyurethane resin, free from solvents, per...
IT-46044 Goito
Fluid Spritz : Inorganic liquid accelerant, for sprayed conglomerates (shotcrete)
Fluid Spritz : Inorganic liquid accelerant, for sprayed conglomerates (shotcrete)
Fluid Spritz Solution of mineral reactives (sodium silicate) to be used for the acceleration of setting of sprayed masonry and projected concretes, in...
IT-46044 Goito
Fluid Cable : Powder additive for preparation of high-performance injection fluid grouts
Fluid Cable : Powder additive for preparation of high-performance injection fluid grouts
Fluid Cable Fluid Cable is a powder product that is added to cement to obtain, after mixing with a very small amount of water, injection fluid grouts...
IT-46044 Goito
Fluid CR : Powder additive for cement conglomerates
Fluid CR : Powder additive for cement conglomerates
Fluid CR Fluid CR is a powder additive for concrete, grout and pourable mortar, formulated with microlysyls with pozzolanic activity, hyperplasticisi...
IT-46044 Goito
Syntech HAG Mono : Low viscosity hydro-expansive single-component polyurethane resin
Syntech HAG Mono : Low viscosity hydro-expansive single-component polyurethane resin
Syntech HAG Mono Single-component hydro-expansive polyurethane resin (does not require a catalyst and increases its initial volume by approximately 3...
IT-46044 Goito
Syntech HAG Eco : Hydro-expansive polyurethane resin, without solvents, injectable
Syntech HAG Eco : Hydro-expansive polyurethane resin, without solvents, injectable
Syntech HAG Eco Mono-component, enabled for contact with drinking water, semi-flexible, expanding (increases its initial volume of about 20 times) po...
IT-46044 Goito
Fluid SRA: Hydraulic shrinkage reduction additive for mortars
Fluid SRA: Hydraulic shrinkage reduction additive for mortars
Fluid SRA Concentrated liquid additive formulated to reduce shrinkage in the plastic phases of cement mortar. It reduces shrinkage by over 50% compar...
IT-46044 Goito
Deterg-A : Cleaner, descaler, saline converter with an acid pH
Deterg-A : Cleaner, descaler, saline converter with an acid pH
Deterg-A Concentrated solution of buffered acids, anionic and non-ionic surfactants with high biodegradability, for deep cleaning of substrates from ...
IT-46044 Goito
Deterg-A : Cleaner, descaler, saline converter with an acid pH
Deterg-A : Cleaner, descaler, saline converter with an acid pH
Deterg-A Concentrated solution of buffered acids, anionic and non-ionic surfactants with high biodegradability, for deep cleaning of substrates from v...
IT-46044 Goito
Fluid spritz AF : Alkali-free setting accelerant additive for shotcrete
Fluid spritz AF : Alkali-free setting accelerant additive for shotcrete
Fluid spritz AF Alkali-free mineral reactivity solution to be used to accelerate sprayed concrete and shotcrete, in the consolidation of rocks outdoo...
IT-46044 Goito
Deterg Floor - HC : Biological cleaner for the rapid elimination of hydrocarbons (HC)
Deterg Floor - HC : Biological cleaner for the rapid elimination of hydrocarbons (HC)
Deterg Floor-HC Deterg Floor - HC is a biological detergent for hydrocarbons, liquid disintegrant based on selected microorganisms with the ability t...
IT-46044 Goito
Consilex Nanosil T-1000 : Nano-dispersion water-oil repellent for treating absorbent materials
Consilex Nanosil T-1000 : Nano-dispersion water-oil repellent for treating absorbent materials
Consilex Nanosil T-1000 An impregnating water-oil repellent that is colourless, non-film and based on the nano-dispersion of silicon compounds. Prote...
IT-46044 Goito
Consilex Nanosil T-1000 : Nano-dispersion water-oil repellent for treating absorbent materials
Consilex Nanosil T-1000 : Nano-dispersion water-oil repellent for treating absorbent materials
Consilex Nanosil T-1000 An impregnating water-oil repellent that is colourless, non-film and based on the nano-dispersion of silicon compounds. Protec...
IT-46044 Goito

The europages app is here!

Use our improved supplier search or create inquiries on the go with the new europages app.

Download in the App Store

App StoreGoogle Play