ABES S.À R.L. PUBLIC DESIGN -

ABES Bicycle-Stand 451 is a frame made from bent steel tubes with a 42.4 x 2.5 mm diameter, a vertical rear tube, parallel tube ends. Only one foundation is required. Optional: convex cover plate with a 300 mm diameter. Mounting Concrete embedment (only one foundation required). Finish · Stainless steel 1.4301 pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge. · Hot-dip galvanised steel ST37, alternatively with powder coating in standard RAL colours or DB 703. · Other colours available on request at a surcharge. Note: For the removable version, the cover plate is needed. ABES Bicycle-Stand 451 overview: – Pipe diameter: 42,4 x 2,5 mm. – Measurments: (H above ground x L x B in mm): 855 x 340 x 290 – Optional: convex cover plate with a 300 mm diameter

ABES Bicycle-Stand 473 are two, three or four adjacent 453 bike rails made from perpendicular steel profiles (50 × 20 mm), welded onto two flattened steel bars. Other profile dimensions, heights and widths are available upon request at a surcharge. Mounting Screw-on Finish – Stainless steel 1.4301 pickled and smoothed, grain 240. Optional: electropolished/high-gloss (no surcharge) – Steel ST37, galvanised with powder coating in standard RAL colours or DB 703 – Other colours available on request at a surcharge – Also available with LED strip on the underside of the cross tube or with knee rail ABES Bicycle-Stand 473 overview: Bicycle Stand, steel ST37, galvanised/powder-coated or stainless steel 1.4301 – Rectangular profile 50 × 20 mm mitre-cut, welded onto two flattened steel bars – Height above ground: 860 mm – Width (rail): 820 mm – Length: 750 (2) / 1.450 (3) / 2.100 (4) mm

ABES Tree-Guard 662 is a bent, U-shaped steel frame with a diameter of 48,3 x 2,6 mm. Three foundations are required. Optional: a ground shell for the removable model. Mounting Concrete embedment or inserted into a standard ground shell (not 3p-Technology). Finish – Stainless steel 1.4301 pickled and smoothed Electropolished to customer’s requirement (high-gloss) – surcharge. – Hot-dip galvanised steel ST37, additionally with powder coating in standard RAL colours or DB 703. – Other colours available on request at a surcharge. ABES Tree-Guard 662 overview: – Material:Hot-dip galvanised steel ST37 or Stainless steel 1.4301 pickled or powder coating in standard RAL colours or DB 703. – Tube diameter: 48,3 x 2,6 mm – Measurements (B x L in mm): 1200 x 1200 – Standard Height above Ground 450 mm – Ground insert: approx. 350 mm – other heights above ground: on demand

ABES Bench 104 is a cast aluminium bench system without back rest, consisting of four basic units. The system has a modular construction: – A straight seating unit. – A seating unit bent at a 45° angle. – A seating unit bent at a 90° angle. – Base with inward-facing legs, joined to a plate at the lower end, with the upper end of the plate supporting the seating units. Mounting Screw-on or free standing. Finish – Powder coating in standard RAL colours or DB 703. – Other colours available on request at a surcharge.

ABES Lighting-Bollard 265 LED is a rectangular steel bollard with a flat top and a vertical LED light strip (650/550 mm) on both narrow (265 LED-A) or on both wide (265 LED-B) sides. Each with 2 LED strips, Perspex (PMMA) diffuser, operated using 24 V low voltage, 2 m connector cable with plug socket at the base of the bollard. Protection type IP 67. Mounting – With 3p-Technology. – The Connection, including all technical requirements, is delivered by the client and is not included in this package. Finish – Steel ST37, galvanised with powder coating in standard RAL colours or DB 703 – The height can be adjusted individually – With ground rosette Technical information – Light unit: 2 LED strips (550 mm/650 mm) – Power supply: 24 Volt DC – Power input (max.): approx. 16 W (550 mm) / approx. 19 W (650 mm) – Luminous flux (max.): approx. 990 lm (550 mm) / approx. 1170 lm (650 mm) – Reflected beam angle: 120° – Light colour: RGB + white (4000 K) – Protection type: IP 67

ABES Bench 103 is a park bench steel tubes made of bent and adjusted to miter with two diagonally opposite back rests. The steel frame is designed to accommodate seating supports and back rests made of wood. Mounting Screw-on or free standing. Finish – Stainless steel 1.4301 pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge. – Hot-dip galvanised steel ST37, powder coating in standard RAL colours or DB 703. – Seating slats made from hardwood. – The following changes are possible for an extra price: colour and wooden surface. ABES Bench 103 overview: Park bench with back rest – Feet: Stainless steel 1.4301 pickled and smoothed or Hot-dip galvanised steel ST37, powder coating in standard RAL colours or DB 703. – Seating slats: Hardwood. – Measurements (L x H x W in mm): 2380 x 730 x 835. – Delivered unassembled.

ABES Lighting-Bollard 230 LED is a continuous cylindrical light bollard made from cast aluminium with a flat top. Fitting of one LED module with 21 LEDs. Internal cable with connector plug, protection class IP67 and 24V low voltage. Mounting – Only available with 3p-Technology, comprising a ground shell, a junction piece with integrated breaking point, cable slot and anti-roll device, two clamping cones and a hex head bolt. – The Connection, including all technical requirements, is delivered by the client and is not included in this package. Finish Powder coating in standard RAL colours or DB 703. Technical information – Light unit: 1 x 21 LED – Voltage supply: 24 V DC – Total luminous flux: approx. 320 lm – Power: 3 W – Light emission: vertical approx. 360°, horizontal approx. 120° – Light color: 6000 K (cool white), 4000 K (neutral white) or 2700 K (warm white) – Protection class: IP67

ABES Lighting-Bollard 266 LED is a square steel bollard with a flat top and a vertical LED light strip (650 mm) on two opposite sides. Each with 2 LED strips, Perspex (PMMA) diffuser, operated using 24 V low voltage, 2 m connector cable with plug socket at the base of the bollard. Protection type IP 67. Mounting – With 3p-Technology. – The Connection, including all technical requirements, is delivered by the client and is not included in this package. Finish – Steel ST37, galvanised with powder coating in standard RAL colours or DB 703 – The height can be adjusted individually. – A ground rosette is part of the delivery. Completely covers the ground shell. Technical information – Light unit: 2 LED strip (650 mm) – Power supply: 24 Volt DC – Power input (max.): approx. 19 W – Luminous flux (max.): approx. 1170 lm – Reflected beam angle: 120° – Light colour: RGB + 4000 K – Protection type: IP 67

ABES Lean-On-Bench 108 is a back to top widening lean-on element with a curved profile. The upper half is equipped with a wooden covering. Mounting Screw-on or concrete embedment. Finish – Powder coating in standard RAL colours or DB 703. – Other colours available on request at a surcharge. – Can also be supplied in cast aluminium, if desired. – Lean-on surface made of wood. – The bench is delivered unassembled. Order Information Art. N° 108.101 (screw-on) Art. N° 108.151 (fixed mounting)

ABES Bollard 011 is an oval bollard made from cast aluminum with a spiral-shaped head and a protruding vertical joint. Mounting Removable with 3p-Technology, comprising a ground shell, a junction piece with integrated breaking point, two clamping cones and a hex head bolt. Alternative: concrete embedment. Finish – Powder coating in standard RAL colours or DB 703. The basic package for ABES Bollard 011 with 3p-Technology contains: – The bollard, cast aluminium, powder coated in RAL, DB 703 Glimmer grey – Measurements (H above the ground x Ø in mm): 860 x 102 x 96/108 – Ground shell 300 mm (000.001), cast iron, galvanised – Junction piece (000.008), cast iron, galvanised – clamping bolt set, hex head (N1+N2+hex-screw), stainless steel 1.4301 (000.004)