The sensor module µCAN.1.ti-SENSOR can be joined with any sensor and is designed to acquire an analogue temperature signal. It can be integrated directly in the sensor head (18 mm in diameter). Sensor tolerances can be adjusted with the module already built in. The sensor signal is linearized and monitored directly in the hardware.Temperature Thermo type J, K, L Temperature Pt100, Pt1000 (2-wire) Accuracy ± 0.5 K (Thermo) Accuracy ± 0.2 K (Pt100) Resolution up to 16-bit (0.1 K) Sampling rate up to 1 kHz Signal type freely configurable Sampling rate adjustable Operating temperatures -40 °C … +85 °C Power supply voltage 9 V DC … 36 V DC Fieldbus CAN classic / CAN FD Protocols CANopen / CANopen FD / J1939
Germany
The µCAN.4.ai-BOX is an extended universal measurement module for the acquisition of analogue standard signals. The device is designed for measuring signals of +/- 10 V, 0…20 mA or 4…20 mA. The CAN interface supports the protocol CANopen.Voltage +/- 10 V Current 0(4)…20 mA Accuracy 0.01 % (FS) Resolution 16-bit (1 mV / 1 µA) Resolution up to 24-bit (0,01 mV / 0,01 µA) Sampling rate 5ms / 200 Hz Galvanically isolated fieldbus Adjustable scaling Signal type freely configurable Protected against mechanical stress Fieldbus CAN Protocol CANopen / Raw CAN
Request for a quoteGermany
The sensor module µCAN.1.sg-SENSOR can be combined with all common pressure sensors and is designed to acquire an analogue sensor signal. It can be integrated directly in the sensor head (18 mm in diameter). Sensor tolerances can be adjusted with the module already built in. The sensor signal is linearized and monitored directly in the hardware.Strain gauge full bridge Voltage ± 20 mV Supply voltage 4.5 V Accuracy 0.2% (FS) Resolution up to 16-bit (1 mV / 1 µA) Sampling rate up to 1kHz Supply of the strain gauge full bridge Scaling / sampling rate adjustable Measurement range adjustable Operating temperatures -40°C … +85 °C Supply voltage 9 V DC … 36 V DC Fieldbus CAN classic / CAN FD Protocol CANopen / CANopen FD / J1939
Request for a quoteGermany
The sensor module µCAN.1.ai-SENSOR is designed to acquire an analogue signal. It can be integrated directly in the sensor head (18 mm in diameter). Sensor tolerances are adjustable. The sensor signal is linearized and monitored directly in the hardware.Voltage ± 10 V Current 0 mA … 20 mA Accuracy 0.005% (FS) Resolution 16-bit (1 mV / 1 µA) Sampling rate up to 1 kHz Scaling adjustable Sampling rate adjustable Measurement range adjustable Operating temperatures -40°C to +85 °C Supply voltage 9 V DC to 36 V DC Fieldbus CAN Classic / CAN FD Protocol CANopen / CANopen FD / J1939
Request for a quoteGermany
This pioneering controller goes far beyond the functionality of conventional PLC controllers. As an all in one IoT gateway, CANopen automation controller and top-hat rail PC, the µMIC.200 offers an end-to-end solution.
Request for a quote